Counting matching models…
prints in under 10min at layerhight 0,3 ( see print image) 2 perimiter as of the roughness 3 bottom and 3 top layers Color as you like !! This is all Black then DarkGray some stones Brown and terracotta then Drybrush some moos in ( floor)…
use cura slicer 75deg option prnits without support at 0,15 layer height HAVE fun Studentwork FDM supportless mesh by meshy.ai PLEASE LIKE as you download !! THERE is more here in the Profile from DND wargame stuff TAKE a LOOK
Have fun prints in 0,3 25min easypaintjob PLEASE see the other terainstuff i made
Prints in under 15min FDMready NOinfill NoSupport HAVE fun This is a complete new modell despite so many Easter egg PLEASE see all the other 600 creations here FREE available https://www.printables.com/@Magig_I3Prusa/models
prints in 0,2layer without support use good filament as of Bridgemode just drybrush some color on it and you are good HAVe FUN please see the other STUFF i made for the Desert Game Area
A compact STL model featuring a triangular base with a smoothly curved top edge. Its clean, minimalist geometry and smooth surfaces make it suitable as a design element or structural component. SETTING: Material: PLA / PETG Infill: 15–20%…
This are fast printed wall terrain building plates use 3LAYERS only and a skirt Layer 1 is 0,3 the others are 0,2 to get FAST speed output and best plate Take the speed for the first laer down to your printer need use good Filament…
Prints in 0,2layer at 12min use 0,15 for very good quality no support needed as you see i used raft as so tiny part to stick on CLEAN Quads Mesh for your own Holes and sidekicks Feel free to remix
prints in under 10min at layerhight 0,3 ( see print image) 2 perimiter as of the roughness 3 bottom and 3 top layers Color as you like !! This is all Black then DarkGray some stones Brown and terracotta then Drybrush some moos in ( floor)…
Print in 0,2 Layer 2Walls 10% infill Color in Dark green with some black base shown thrue ###_ IF YOU ARE MODIFYING it Mark as REMIXED ### Have Fun
a supper to paint small stone wall for RPG Terrain wargames Tabletop FDM ready Fastprint in under 10min just drybrush some green to the botom and some light stonegray HAVE FUN
use your est printing filament and settings as of 77deg angels Have fun this is closed even as of AI MAKE your own free creation on MESHY Ai only for private use !! as you see it is not the original from the AI in the IMAGE
prints supportless in 0,3layer 45min Have Fun there is a middlel line to take it apart for a wall or room escape There is also an open Door version im my accoount HAVE fun
I testet on this Creatin the minimal use of support Fastprint 15min Anet A8 Support Tree 4mm 65deg (( shoudt hve only arms and Face )) Raft for the small feet Layer adaptiv 0,2/0,05 I use This as Standard for Fast Good printing CURA…
it is a Scalable TO your Need Individual X/Y/Z Railway or whatever Roman like bridge. prints in 0,3 Fastprint detailed in 0,2 ADAPTIV for the top Have fun if you REMIX mark as REMIXED
Ultra Fastprint 8min Game Pillar Easyprint Column for a Diorame prints from 0,3 to 0,12 as you like MORE Struff see my account HAVE FUN
you can print this in 5min with 0,4 layerhight 1perimiter no infill 2 bottom 3 top layer Just some Graycoding HAVE Fun
Prints best with 0,3Layer (becomes more roughness on painting HAVE fun
The I-texture is AI genrated Meta mesh by meshy Have fun there is way more Terrain and Wargaming in my account GET the Modells a LIKE PLEASE
As a wish of the DISCORD dungons channel the Small portal for TTRPG terrain prints without support at 0,3layerheight 15min no infill CR10 0,2 35min 6mm zigzag infill 2perimiter 2 botton and 2 top layer HAVE fun
the image is of a KI teturiert stl FDM Supportless 0,2 layer print optimised STL file see the Print file paint as you like Painted Creations do not generate Downloads as many as Texturiert does Therfr im texturing this creatures HAVE Fun
as you see i printed it upside down no support at 0,3 use bridge mode and ofcause the 75deg max overhang HAVE fun There is more of this stuff search my modells on Printables her in Modell tab !! PLEASE like the Models as you download them
if you need put her on BASE but you can easy print in different colors. HAVE Fun Please LIKE her if you Downloiad MORE here on my modells
use cura slicer 75deg option prnits without support at 0,15 layer height HAVE fun Studentwork FDM supportless mesh by meshy.ai PLEASE LIKE as you download !! THERE is more here in the Profile from DND wargame stuff TAKE a LOOK
Have fun prints in fdm no support use light brown color and paint the corners golden if you base paint black you can brush some wood pattern after drying
NPC EASY see more NPC and terrain stuff in my account HERE FREE STUFF https://www.printables.com/@Magig_I3Prusa/models
prytti simple mount for the ultrasonic sensor to be fasten at some plete small holes closed for fast good front plate print
prints in 20min use all black then tootbrush some ocer sandcolor HAVE FUN
very easy to paint logg shape wall segment PAINT entire black DRY out add some ocer and brpwn use NEW toothbrush to make scratches or brass brush !! Fastprint in 0,3 at 12min HAVE FUN
Hi! Here is audi badge model, that i created useing real image, of the car badge. Printed with these settings: Nozzle 0.4mm Layer high 0.1 wall lines 3 Model size: 7.8cm length, (easy to scale to any size) Feel free to sell printed models…
prints fast at 0,3 layerhight use bridge mode to support the inner roof Have fun paint with dirt colors some stones extra gray use waterpaint Have fun +++ PLEASE see the other acanes i made DND stuff
Have funprints supportless in 0,2 and fast at 0,3 Please see the other stuff i made https://www.printables.com/@Magig_I3Prusa/models
Have fun prints in 0,3 25min easypaintjob PLEASE see the other terainstuff i made
use Bridgemode and 75deg Max in cura to set the gcode IMAGE Proofing no support at 32mm scale HAVe fun Paint as you like second image 5min Black gray and red PLEASE see the other stuff i made here LIKES are WELCOME !
this is great for a battle it hosts up to 8 miniatures 28mm at the time as of DND 4x (100mm) Size Prints with one wall 0,8nozzle at 0,3 layer height Ender3 0,4 in under 45min If printed in Sansstone Brown only some Drybrush added is ok…
prints optimized in 0,3 layer at 10min Have fun paint as you like DRYbrush PLEASE see all the other FREE stuff in my account
optimized for 0,2 FDM use less for Painting HAVE FUN PLEASE SEE THE OTHER STUFF
Prints in under 15min FDMready NOinfill NoSupport HAVE fun This is a complete new modell despite so many Easter egg PLEASE see all the other 600 creations here FREE available https://www.printables.com/@Magig_I3Prusa/models
prints best in fuzzy 0,3 layer Have fun use Sanding for realistic look PLEASE SEE THE OTHER STUFF HERE in my FREE account ! https://www.printables.com/@Magig_I3Prusa/models
prints in 0,2layer without support use good filament as of Bridgemode just drybrush some color on it and you are good HAVe FUN please see the other STUFF i made for the Desert Game Area
very cool massive female dwarf use CURA 75Deg Max option to get it support free ""it will print on other slicers also without support just unCLICK it "" have fun please see all the other miniatures im my account !
use CURA 75deg Max settings see image prints supportfree in layer optimized 0,2mm Have fun please see all the the other miniatures here in my account
A compact STL model featuring a triangular base with a smoothly curved top edge. Its clean, minimalist geometry and smooth surfaces make it suitable as a design element or structural component. SETTING: Material: PLA / PETG Infill: 15–20%…
A sleek business card holder with an open-front design that keeps your cards organized and easily accessible. Its minimalist shape and sturdy construction ensure stability, making it a great addition to any desk, reception area, or office…
nice and fast Game-Terrain Printing you can even just change color ground-House-roofe DONE Have Fun LEAVE a LIKE as you Download !!! Please see the other Stuff here i made ALL FREE Download !!
prints very easy use your preferd layerhight 0,3 gives nice layers on sandstone you can san it but only wash on it is ok for gaming 3Platforms for miniatures HAVe FUN Please see my other game field items
very easy good looking rock
Made by students Have Fun print fast 120mm/sec use some stone color You can sanding it and airbrush some more Stone colors Prints support free in cura 75Deg max option Have fun PLease see the other terrain stuff students made
This is a robust transport and storage container for tabletop minifigures. It is designed to be very sturdy but printed very fast with a minimum of filament. The container has a snap-fit cap which closes the container tight and protects…
I used meshmixer to design thin supports, easy to remove. I was learning meshmixer so they can be improved easily but they worked for me. I repaired surface aswell because I've seen something strange. You can add my stl to original model…
This is a remix from HappyMoon's design https://www.thingiverse.com/thing:2978957 I've done custom supports with meshmixer for full-water piece, and for the mug. I tryied to support not visible parts. You need heavy infill in full-water…
A Must have and 20min Print HAPPY NEW Year Eyeglasses good to see thrue you can use a piece of 1,75 Filament to make a bow and fix the side
No supports Infill 35% good Layer 0,2 good Basic clip for anything, low filament use, fast print Default size is approx 5cm X 2cm X 0,6cm If you need it for bigger bags, size it up in your slicer according to needs You can use different…
RING | Fastprint Table Lamp Want to buy a physical 3D print of this product? Head to Trajann online store . Fast-print, stylish & retro, light & strong . Those were the criteria I kept in mind when designing this RING table lamp (for E14…
Its A New Construct of a Very Simple Design Optimized for Fast print FDM 10Pices on a raft can print under 10Min at 120mm/sec 2 Designs FULL and Spring
