Counting matching models…
FMS FCX24 Power Wagon wrecker truck inspired by Matt's Offroad Recovery’s world's biggest offroad wrecker, with man-powered winch. [Instructions] Slicer setting for winch gears (both L and S), select "concentric" for top/bottom pattern.…
FMS FCX24 Chevrolet K5 Blazer bottom protector. Works with my FPV camera mount . Needs 8 small screws to mount (make sure they don't stick from other side because they can scratch steering servo). You need to print: 1 Left protector 1…
This is v1 and it is still in work. Frame can be printed with little supports needed. Transmission mount can be printed without supports.
Display Stand and Rock Sliders for FMS FCX24 Blazer
Rear Bed and Cargo for FMS FCX24 Power Wagon. Filament: Mount and Bed - PLA, Cargo - Wood filament (I used ColorFabb Woodfill)
This bed is super simple, just meant to be able to hold the battery so you don't have to take the body off all the time. Fits between the wheels, rather than having a wheel well. I mounted mine with long screws into some plastic strips…
The FMS FCX24 cassis has a two-speed transmission. The transmission rod leaves on one side of the transmission for the servo and on the other side to manually lock it to one gear permanently. The side to look it always works some sand…
Should be a drop-in replacement. Added a photo with my straight bumper ‘design’ as well. If you print this in TPU it will be extremely hard to break.
Designed for the Littleguyracingparts Super 8 axles, which means anything with an wheel to wheel of up to 13.5cm. Stock width is like 9.5cm. Works with stock axles, stock axles+hex extenders, Meus isos, Lgrp super 8s axles without hex…
this is a part made for the FMS FCX24 because this part comes from China and takes forever to get here so I made one that will print and work for the FCX24. I now will be using Onshape for my designing because the slicer software likes it…
FMS FCX18/FCX24 Wall Mount – Because Your Floor Isn’t a Garage Sick of tripping over your crawler and transmitter? Hang that beast on the wall like the trophy it is. This simple 3D print keeps your RC life tidy and your significant other…
These are designs to replace the bumper construction or part of it. If you want another bumper design drop me a message. The best design is the single piece bumper, good clearance and strong.
FMS FCX24 Chevrolet K5 Blazer FPV camera mount for Diatone SNT Sniclo Race480 FPVBOX camera. Snaps to FXC24 frame. Prints with supports upside-down. I used double-sided 3M tape to mount the camera. Version 1 - first version, camera can be…
Use this as the base for your own bed design, message me if you need a change or special version. Designed for FMS FCX24 Power Wagon Fits every FCX24 chassis As basic as possible No supports, flat print Snaps in place Tested with PETG but…
Crazy looking wheels! Everything gets stuck in these things if you drive over plants, but they kind of work and you can kind of crawl with them. I may try some other designs and add them here, the tires press fit on the hubs to it should…
FMS FCX24 Chevrolet K5 Blazer hitch to connect Lego Duplo trailers and carts. Base is mounted to stock rear bumper mount with stock screws. The hitch part is detachable, just press on the sides to mount or remove it. It moves up and down…
I love my FMS FCX24 for it's scale look and climbing abilities. The original bumper limited the approach angle and hooked twigs occasionally. That's why I created my own version. You need to cut the front fender slightly, to get a snug,…
Small caps I made for the FCX24M Range Rover. I didn't like the wheel covers taking up half of the roof rack, but the way it's designed they hold the rack to the roof. So I made these little caps to hold the rack in place, with the added…
Dies ist ein weiterer Akkuhalter für den FCX24m. Der Akku wird vorne quer positioniert. Der Akku kann per Klett oder Gummiband befestigt werden. Passt auch beim Range Rover und dem Discovery. Nicht passend für Defender 110 und Defender 90!
Ständer für alle FCX24m Modelle Der Tacoma hat 52mm Reifen verbaut
Fix the biggest problem with the fcx24m, the rear biased weight distribution! Improve your climbing performance! Add a super simple winch to your fcx24m with a cheep badge reel/holder and move your battery over the front axle. All with…
A small spacer to mount a Hobbywing quickrun mini24 (or other motors with a larger diameter than 16mm and longer pinion shaft.)
Ein Akkuhalter für den FC24m um den Akku vorne zu positionieren. Der Halter wird einfach auf den Rahmen geclipst. Der Akku kann per Klett oder einem Gummiband befestigt werden. Passt auch beim Range Rover und dem Discovery. Nicht passend…
A cover for the buttons on the FMS FCX24 remote. Use 1.75mm filament for the hinge. A 1.8mm drill bit may help if you can't push the filament through the hole. It also includes a hole for a 3x6mm magnet.
A Stand for my FCX24M Discovery should also wor with some of the sliders for the gearbox ;)
I didnt like the flexebility of the original axle and steering linkage, so i made my own. Axle: For the axle linkage is reused the original balls. It might be a bit stiffer but it will free up in the car. Or slightly increase the size by…
A rear driveshaft for the FCX24M. I used a 4mm nozzle and PLA
I needed a slightly lower rear batteryholder for my reciever. added extra mounting holes for longer pistons. I used PLA, 0,4mm Nozzle, 0,16mm Layer, 2 walls, 15% infill
print this in the orientation shown no supports , can be mounted with double sided tape or put holes where the screw holes come up for the original bars , what i did was heat a pin up with a lighter and melted holes in the truck cap to…
Dies ist ein weiterer Akkuhalter für den FCX24m. Der Akku wird vorne quer positioniert. Der Akku kann per Klett oder Gummiband befestigt werden. Passt auch beim Range Rover und dem Discovery. Nicht passend für Defender 110 und Defender 90!
Ein Akkuhalter für den FC24m um den Akku vorne zu positionieren. Der Halter wird einfach auf den Rahmen geclipst. Der Akku kann per Klett oder einem Gummiband befestigt werden. Passt auch beim Range Rover und dem Discovery. Nicht passend…
