P
PrintablesMongoKingofBongo
GoPro 10 Bracket for Feiyutech G5 Gimbal
this Object is a Bracket for a Feiyutech Gimbal because the GoPro 10 doesn't fit in the Original Bracket
- Downloads
- 73
- Likes
- 1
- Rating
- 0
Search results: feiyu
Counting matching models…
P
PrintablesRasmussen
FeiyuTech G5 Gimbal - GoPRo Mounting Ring
This is based on the Karma ring but with some important changes: Flipped the nut mount point - makes access much better when wearing chest plate Thicker mounts. 2 Extra grip pads. Longer mounting arm. Vertical support ring. Cutout to…
- Downloads
- 68
- Likes
- 5
- Rating
- 0
P
PrintablesChris vK
LiPo Checker/Buzzer Case 2-3S - Feiyue FY08 and other models too
Hi all, mainly designed to fit my Feiyue Fy08 since I'm using it on 3S Lipo and I don't want to destroy my lipo. Fits perfectly with my 3S 2200mAh into the lipo bay. To use it with a Socket just desolder the pin strip and solder a socket.…
- Downloads
- 56
- Likes
- 19
- Rating
- 0
P
PrintablesJanek
GoPro Hero 4 adapter for feiyutech vimble 2 gimbal
I've created Fallout themed adapter for GoPro Hero 1/2/3/4 for feiyutech vimble 2 gimbal. It's easy to print, no supports are required.
- Downloads
- 23
- Likes
- 4
- Rating
- 5
P
Printables3DTC
GOPRO 11 Black mini & Feiyutech G5 gimbal mount
Pls give a like if it fit your expectation :) Adaptation for the cheap Feiyutech G5 gimbal to be able to make the best with the GoPro 11 mini, Cinematic render ++ Recycle the old electronic buy second hand and get a cinematic render on…
- Downloads
- 22
- Likes
- 0
- Rating
- 0
P
PrintablesMaple 3D
Feiyutech G6 GoPro Gimbal Clamp
This clamp allows you to attach your Feiyutech G6 gimbal to a GoPro chest mount via J GoPro mount. Makes for some awesome mountain bike footage. Requires M3 bolt and nut Check out the footage to see how smooth it is…
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesDOMELL
Feiyue FY-03
Engine spare part for Feiyue FY-03 Eagle RC Car. 1:10 ;)
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
PrintablesEvan000
Feiyu G4 Adapter for Yi 4K Action Camera
A set of adapters to fit the Yi 4K action camera to a Feiyu G4 gimbal. You'll need a new set of screws to use this adapter set. Specifically, M2 Thread, 30mm Long, 0.4mm Pitch screws. I used socket head cap screws from McMaster-Carr.…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
Printablesmuddtt
Feiyu Tech Gimbal Carabiner Ring
I created a ring to slip onto my Feiyu Tech Gimbal. This allows me to attach a carabiner and use a lanyard around my neck. Now I don't have to find somewhere to put it down in order to use my hands. Made for the G4GS that holds a sony…
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
PrintablesRiciR
Lens cover for FeiyuTech Pocket 2 Gimbal camera combo.
I have both models of the Feiyu Pocket 2. While I'm using them I often have to put them down, put in a pocket, etc. I usually have it mounted to a handle with a light and a Zoom mic, and putting it in the case is a pain. So - simple…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
Printablesmeatkvass
FeiyuTech WG2X magnetic chest mount
!! Do not put magnets very close to the gimbal. Gyroscope in the gimbal reacts to the magnetic field !! This is magnetic chest mount for FeiyuTech WG2X gimbal. It has minimalistic clean look with straps hidden under clothing, good…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesLeoRc
Feiyue FY03 / WLToys 12428 Outer Beadlock ring to apply 1/10 crawlin Tires
I had a 120mm tires that i wanted to apply to stock wltoys 12428 discs, unfortunately stock discs has different diameter for the beadlock rings, this thing could help you if you want to do the same. See results here: I used tires from an…
- Downloads
- 14
- Likes
- 5
- Rating
- 0
P
PrintablesRenba
Steadycam Feiyu G3 Ultra Holder for Gopro Mounting Acc.
Feiyu Tech G3 Ultra Steadycam Holder for Gopro original and compatible mounting accessories. Printed with support and PLA Carbon Of course you have to print both sides... Happy Printing !!
- Downloads
- 14
- Likes
- 3
- Rating
- 0
P
PrintablesCitruspers
FeiYuTech Vimble 2 Travel Lock
Kudos to Wendigo013 for the original design! Why This little piece of plastic will lock your FeiYutech Vimble 2 securely in place for transport without having to carry the nice but bulky case. It's functionally identical to Wendigo's…
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
PrintablesSchlachtkreuzer
FeiYu-Tech FY-G4 GoPro mount accessories small/light
Feiyu-Tech FY-G4 gimbal mount for GoPro accessories: Inspired by other Gopro mounts, i designed a mount for the FeiYu Tech G4 steadycam gimbal, to use all my gopro mounts easily. As you see at the pictures above, you need a set of screw +…
- Downloads
- 10
- Likes
- 3
- Rating
- 0
P
PrintablesKeith Whitehead
Feiyu Mini3D Gimbal Adapter for Runcam2
Mini 3d Gimbal Runcam 2 Adapter Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: Yes Resolution: 2 Infill: 40% Category: R/C Vehicles
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesVladfr
Gopro's holder for Feiyu Tech SPG
French: Ceci est un verrou pour être sûre que la gopro ne bougera pas une fois sur la nacelle Feiyu Tech SPG-C. Il y a 2 fichiers un pour gopro avec écran et l'autre que pour la gopro. English: It's an holder to be sure that's the gopro…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
Printableshotbrass2005
Feiyu Tech Mini 3D Electrohub Mounting Plate
I bought a Feiyu Tech Mini 3D gimbal to mount to my electrohub. The mounting plate is designed to fit many commercially available quads, but does not match up with the camera rails on this multirotor. This plate matches up with the six M3…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
Printablesshaktimaan
Yi 2k Cam to Feiyu Action Gimbal - GoPro Size Adapter
The Yi2k Action Cam didnt fit into Luuv Action Gimbal GoPro Frame (Feiyu Tech) by about 1mm. I decided not to sand the cam Body down.
- Downloads
- 9
- Likes
- 2
- Rating
- 0
P
PrintablesFloki
Feiyu G6 GoPro Mic Adapter
Needed a GoPro Mic adapter Holder for a Feiyu G6 so I made one. No Branding on it and fits perfectly on the G6 but may fit other Gimbals. Print Settings Printer brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesKiko64
Feiyutech WG2 GoPro adapter
print in the desired position (on the chamfered surfaces) without supports. v2: stronger version
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesJussi
Feiyu Tech G3 Ultra longer Z -axis arm (More ROLL space)
Longer Z-Axis arm for Feiyu Tech G3 Ultra 3-axi stabilizer. It allows camera to Roll more than default 45 degrees per side. By using this arm rotation can be 270 degrees on stock control cable and if you change the cable then it can be…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesSchlachtkreuzer
FeiYu-Tech FY-G4 GoPro mount accessories big
Feiyu-Tech FY-G4 gimbal mount for GoPro accessories: the bigger version< Inspired by other Gopro mounts, i designed a mount for the FeiYu Tech G4 steadycam gimbal, to use all my gopro mounts easily. As you see in the pictures above, you…
- Downloads
- 8
- Likes
- 3
- Rating
- 4
P
Printablesrg3d
Feiyu Tech GoPro Adapter - FY G3 G4 G4S
After i was looking for a GoPro mount for my Feiyu G4S i just saw these on ebay but as I have my 3D printer with me the way was to re-design such and make it available for others to print. This fits to Feiyu Tech G3, G4 and G4s. Found on…
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesMJ3DTech
FeiyuTech SCORP 2 Small Plate Replacement Pin Lock
FeiyuTech SCORP 2 Small Plate Replacement Pin Lock - m2 screw needed
- Downloads
- 2
- Likes
- 0
- Rating
- 0
P
Printables
Flat Mount Adapter for Sony Action cam AS30V for DJI Zhiyun Feiyu Mobile Gimbal
Made for my Sony Action cam AS30V works with Zhiyun SmoothQ gimbal. you need: 1 x M3x12 Hex head cap screw 2 x M3x8 Hex Socket Cap Head Screw Bolts 13 x M6 Hex nuts
P
Printables
Feiyue FY03 Large LiPo Batt Box Mod
Feiyue FY03 Large LiPo Batt Box Mod This is a complete Lipo Tray that's got a space (143mm x 28mm x 50mm) for a much larger than stock LiPo. This is for the Feiyue FY03 chassis. It's a 3 piece assembly that doesn't require any extra cuts,…
P
Printables
Feiyue FY03 mg995 standard sized servo/steering mod
Feiyue FY03 MG995 Servo Mod This is a vertical adapter for the Feiyue FY03 to fit a TowerPro mg995 or other servos the same size. You need to mark out and drill/melt 3 new holes in the base of the car to fit this new mount for your…
P
Printables
Feiyue FY03 540 Motor Adapter
Feiyue FY03 540 Motor Adapter This is a 540 motor adapter to fit the Feiyue FY03 RC car transmission. There's 3 mounting holes evenly spaced to fit 6 hole motors. Freecad save's been included. EDITS 18/12/17 FLAW FOUND! The 2 screws that…
P
Printables
Feiyue FY03 radio box
Feiyue FY03 Radio Box A simple box intended to hold an RX Receiver .This attaches to other mods and WON'T fit into the stock vehicle by default. Links to mods this fits onto. https://www.thingiverse.com/thing:2623759…
P
Printables
Wheelie bar - Feiyue FY08 short course truck
Hi all, tried out the Feiyue FY08 just 4 fun. Since I'm using this toy with a 3s Lipo it went to a wheelie machine. Therefore I designed a Wheelie bar. All screws can be used. Only the back sign holder has to be removed. For the wheels I…
P
Printables
Insta360 One R 1 Inch Mod Feiyu Adapter Plate
Remix of https://www.thingiverse.com/thing:4763303 Uploaded model files (GCODE/STL/OBJ) don't have the extruded text in the pictures. Tried in PETG and PLA, both work fine. Print with supports! You can use the default bracket and screws…