Counting matching models…
This saves your ears when wearing your FFP2 masks for longer than just a minute :-) Print it using PET (around 30minutes): no post-processing as PET is flexible enough to bend over your head. Small enough for a print on a Mini! You want…
New version! Check the filenames! Changes from v1 to v2 (check the picture with blue numbers) : Reduced the ventilation holes from 3 to 1 to facilitate cleaning the case with isopropyl alcohol. Increased the length of the hollow of the…
Diese Maskenverlängerung erleichert das Tragen von Gesichtsmasken (Covid-19). Sie schont die Ohren und ist angenehm zu tragen. Eine Seite der Maske wird in die Verlängerung geklickt damit beim Abnehmen der Maske die Verlängerung an der…
Made to print without supports, works with couple of helmets I have, the strap width is 16.5 mm. I used PLA with 0.3mm layer height. There is a slight angle to compensate for the strap orientation, that's why there is a left and right…
This mask prints flat without any supports and with integrated hinges that allow for it to fold around the mask underneath. The red layer in the photos is 4mm high, so the colour change happens after the 4mm mark. In order for the hexagon…
It is the same as the hex version of Dust filter cover for 3M mask by vyrobca ( https://www.thingiverse.com/thing:3982639 ) but shortened. In the foto you see the original design. I had to cut off part of the rim, because it would collide…
This is a remix of the 3M 603 FILTER ADAPTER by vyrobca. It is the same but with built in support. For the original you need to print with support and, at least for me, it took some time remove the support properly. I added a small ring,…
Español: Caja para almacenar una mascarilla FFP2 o KN95. Para cerrar esta caja, es necesario poner 8 imanes cilindricos de 10x2 mm English: Box to store an FFP2 or KN95 mask. To close this box, it is necessary to put 8 cylindrical magnets…
It is a case for children's masks, it is very easy to print. KN95 Children's Mask, approved against viruses and bacteria, offers us a filtration efficiency above 95% Recommended by the OMS -4 x 10 * 2 neodymium magnets Print instructions…
yes, it is another earsaver, but I was not able to find one for my problem. Since we now have to use mostly FFP2 / KN95 mask in Germany, we encounter some brands which are providing very short earloops on their masks. Therefore the…
off course you need two of them i print them with the prusa mini+ standard profile with 0.15mm speed settings
Caja para mascarillas, personalizadas. Adjunto fichero fusion360 para que puedan personalizar con los nombres que les gusten. Además dejo para imprimir Sin nombre, Carmen, Elsa, Amanda, Erica. Nota: para unir las dos parte, se necesita un…
Je fester man seine FFP2-Maske justiert, desto mehr biegt sich der Metallbügel an der Nase auf, was dazu führt, dass die Maske an der Stelle nicht mehr richtig sitzt, mit dem bekannten Negativeffekt der beschlagenen Brille. Diese Klammer…
On my last skiing holiday I had the problem that I had to take off my helmet every time to put the mask on in the lift. The other option would be to wear the mask permanently, but then the ears will hurt at some point. So I found a simple…
Mask Clip for longer work with a mask to avoid pressure points on the ears
Quick release/lock for ffp2 mask which is mandatory if you do wintersports and use the provided transports up the mountain. i also sell it via etsy and willhaben https://www.etsy.com/at/listing/1134733347/…
Clip to mount on the sidestrap of a skihelmet to easily put on or off your FFP2 Mask during skiing
Abstract this case will lock like a lunch box and protect up to 3 FFP2 mask. It will keep your masks from bending and may protect them from a few rain drops. Instructions download the file with the side panels. If you find that they…
Ffp2 Mask Strap | Various Sizes. Pro: One hole remain fixed to the mask ;) SIZES (total lenght): 90 mm 110 mm 130 mm it's really thin (0.8 mm) so super flexible! (even with PLA) Print settings: first layer 0.2 mm --> other layers 0.1 mm…
Design based on my Print-in-Place Mask Case for surgical masks here: https://www.printables.com/model/335834-mask-case-print-in-place I used the same 6mm diameter, 1mm height disk magnets as in the other design and stacked 3 of them to…
A slight remix of the ear saver in https://www.thingiverse.com/thing:4674130 , which is itself a remix of https://www.thingiverse.com/thing:4289544 . Thanks to the original authors for their work! My changes: My version is slightly…
I couldn't find cases for the style of FFP2 mask that is currently quite common at least in my country so I ended up designing my own. The model consists of two parts, the bottom and the lid and they are held together with magnets (4x2 mm…
If you want to reuse FFP2/KN95 Masks they should ideally dry fore a week before you reuse them. Furthermore they shouldn't be used for a long period of time. That's why there are Clips for two Masks a day times seven (for the seven days…
You could store anything in it. A rectangle container build from hexagon walls, it just happens to fit the dimensions of the stack of FFP2 masks I recently acquired. For reasons. Print it in a happy color, I chose indian yellow. It's 140…
Some ski resorts require wearing a ffp2 face-mask in ski lifts. This clip has integrated magnets, this makes it easier to put on the mask when wearing gloves. My friends tested it during a ski trip, #verified design. Let me know how it…
Holder for medical mask or FFP2 mask Can be attached to one side of a medical protective mask or even an FFP2 mask and hooked to the other side to relieve the ears. There are two different variants for the left side: Variant 1: 20mm x…
Holder for medical mask or FFP2 mask Can be attached to one side of a medical protective mask or even an FFP2 mask and hooked to the other side to relieve the ears. There are two different variants for the left side: Variant 1: 20mm x…
Holder for medical mask or FFP2 mask Can be attached to one side of a medical protective mask or even an FFP2 mask and hooked to the other side to relieve the ears. There are two different variants for the left side: Variant 1: 20mm x…
Holder for medical mask or FFP2 mask Can be attached to one side of a medical protective mask or even an FFP2 mask and hooked to the other side to relieve the ears. There are two different variants for the left side: Variant 1: 20mm x…
I've designed this clip as I'm getting mad as glasses always get foggy when I wear an FFP2 mask (currently mandatory in Italy in many places). These are clips designed to be printed in TPU also from Bowden printers. The design is thought…
Currently you have to wear a FFP2 mask while using skiing lifts in Austria. These little hooks allow you to attach and remove the mask while wearing your helmet. You might need to add a knot on both sides to keep the mask tight, this will…
Box for FFP 2 masks for children. Safely stores two of them in the school bag. Print in Place - works directly from the print platform. Also has a corona virus imprint. Supports required (see pictures)
Printed in PLA 0.2 Infill 15%
Easy way to clip your FFP2 mask to your ski helmet on the icy slopes. Comfortable wearing and quick removal.
Print in whatever you like to print in. Usage: Hang the narrower part of the neck band into the elastic band of your mask, roughly in the middle (could require some force). This end remains attached to the mask. Wrap the elastic bands…
Sometimes, when running a small local business, you want to give your customers the opportunity to protect themselves and you by wearing a FFP2-mask which you provide them for free. This is one of many situations where this model performs…
...numbers getting worse, required to wear FFP2 and even recommended here for kids in school. From what I read, FFP2 / KN95 masks can be reused few times when dried properly for 7 days. => this design takes 5 cloth pins (9mm wide) and…
