Counting matching models…
This winder is a little more Versatile than other iterations, subjectively. It uses M5x0.8 Threads to allow each dipole post more secure into the winder. SO239, space for a T140-43 or smaller Toroid for a Choke. Pictured is the dipole as…
The proposed solution is antenna winder which integrates UNUN in the center and contains two compartments, in first one thin coax cable such as RG174/U of length 2.5m and ended with BNC connector is wound, while in the second one the thin…
Overview This design combines the functionality of both a transformer housing and wire winder into a convenient package that is both easy to deploy and store. It is sized to hold an FT140-43 toroid and approximately 67ft of 18AWG wire,…
Links with labels for 80m, 60m, 40m, 30m, 20m, 17m, 15m, 12m, 10m and without label to build a linked dipole antenna as described in multiple places (e.g. here or here ). With the wire I used (simple 1.5mm² wire from a local hardware…
Wire Winder made by the "Ham Radio Dude" I had 4 hole SO239's on hand, and wanted to use em. Perfect for a Dipole or EFHW Fits an FT140-43 Toroid. Any and all use must credit the original author, “Ham Radio Dude”
Hello tribe, We were asked if we were able to make then. well, no would could not because you need a direct drive on your ender to do ninjaflax Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on…
A simple clip to pass antenna wire through and to be held by a carbon 6 pole or pretty much any fishing pole with a decent enough top section (i.e. not the very fine squid pole types). The simple version should be adequate for most…
Hello tribe, So, lets start with oops. when I grabbed this model to print this model is the basic version of a better version by this designer. Now, that is out the way the second oops is that this design by me is no where near as nice as…
Hello Tribe,Don't forget to hit that like button I have moved all my easy print designs over to https://thangs.com/u/187535 We present a stone well with cap and roof, one of the side effect is that you are able to store dice in the well.…
Eclipse NVIS Antenna 40m 20m (15m) 10m this antenna is meant to be an all in one package for emergency NVIS communication. can also be used for POTA for those local QSO in your skip zone. the goal is quick deployment, lightweight and…
2 SIZE AVAILABLE, for QRP or 100W~ simple box for matching unit SOTA POTA portable operation. could be used to make a Dipole, EFHW, EFRW antenna. radio plug into the BNC, the Antenna into the Banana plug. item required: -4mm banana plug…
Multiband End Fed Half Wave Antenna The design of the antenna comes from Frank N4SPP , who presented it originally on his web page Multiband End Fed , which is now unfortunatelly archived. Click on the link to visit the Internet Wayback…
Hello Tribe, I made up a Grot Army artillery tank and if you would like the whole set please visit https://thangs.com/The-Free-Heathen-Workshop/FHW-Mining-Car-Tank-set-v1-multipieceobj-25746 Cheers Maker Millwright Category: Vehicles
Case for EFHW with FT140 (fits other cores) with BNC connector No screws, tight fit case for this simple /P antenna Antenna has shielded opening at the bottom to let the moisture out and avoid problems. Donations for new trx are more than…
Print in PETG 25% infill. No supports needed
Hello Tribe, Just a remix of our magic box to include the mtg logo Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on Patreon.com/thefreeheathenworkshop check out our book…
Hello Tribe, I needed to clean out my water pipe so I made a reamer set.
Portable, pack style antenna. The parts to be printed are - Antenna matching circuit enclosure, loading coil bobbin, wire end insulator, and wire winder for an end fed half wave antenna. The shape of the UNUN enclosure is intended to…
Hello Tribe, Hit that like button For the child Grogu we designed to give it a necklace. Ironically when we designed this we didn't know the next episode it would wear it. Here is our Sunlu Affiliate link…
I designed this to connect an EFHW to a sotabeams tactical mini mast. This allows the antenna wire to freely flow on the mast tip without snagging and so the EFHW to be adjusted based on conditions to inverted L, sloper, inverted V with…
Quick printing wire strain relief for wire antennas. Center hole for connecting stuff. Has a gentle curve as to keep wire from de-sheathing. I kept de-sheathing some thin wire with a simpler strain relief so whipped this one up... The…
This is a fun monster truck school bus.
EFHW antenna base. 4mm screw holes. 6mm support holes Fits this toroid: https://www.amazon.com/dp/B084LVGZ9Q Has optional ground connection hole and counterpoise hole. My personal design uses a counterpoise and I DO NOT connect it to…
Hello Tribe, Please enjoy this 28mm scale missile bunker. if you want an EZ Print version please visit https://thangs.com/The-Free-Heathen-Workshop/FHW-Missile-Turret-Base-with-complete-set-v1-25615 Cheers Maker Millwright Category:…
I like the original OM2JU ( http://om2ju.com ) design and desided to change his model to comply with my needs. I slightly changed the overall dimensions, extended internal part to accomodate bigger UNUN and possible antenna tuner.…
I built this Spoolantenna (KelAntenna ) that was created by OH8CRX. Used it on vacation in Germany on 15 mtr band. Made some nice contacts to USA, rst 57 with my Xiegu G90 20 watt. Easy and simple to assemble All credits to Jucca OH8CRX…
EFHW antenna box, to be filled with EPOXY/Resin. Uses BNC adapter and two 4mm lab-connectors.
UPDATE 11/9/25 - HRD DUDETENNA CASE ADDITION! Now get the cases located at my affiliate link - https://amzn.to/43oyh2G ot wherever you find your cases and print this. Boom, more rugged winder. UPDATE: I uploaded the correct BNC winder.…
Hello Tribe, This is a the simple print design of the Mining Car Tank, I hope you enjoy it. If you would like the EZ Print eversion please visit https://thangs.com/The-Free-Heathen-Workshop/FHW-Mining-Car-Tank-v12-ez-print-25089 Cheers…
Hello Tribe "Made a big mech with @thefreeheathen assets, basically i Frankenstein his models and united them to make this big fella, that you will be able too 3d print if you want as soon as my fellow friend upload it! have a good…
just a lightsaber we designed on stream
[modified from the design by n9dmt ] this is a portable reel to hold a long wire and a balun/unlun transformer. basically an Antenna kit. here is a list of features and modifications i did: removed the screw feature that was hard to print…
I required a way of locking the end of my EFHW antenna once tuned and trimmed. So I created this lock. I used an M4 brass insert and printed 100%. Wrap the wire around the island and then the top clamps down on the antenna wire and locks…
A small part to hold the QRP Guys EFHW tuner onto a piece of standard plastic conduit when out and about on a sota summit. A few sizes of the thumb nut are included as it'll depend on if you'd like to glue the cap on or rely on a size for…
Hello Tribe, This is the final design from Friday's stream, I hope you enjoy, as it stands it doesn't have a name. https://thangs.com/The-Free-Heathen-Workshop/FHW-Walker-v1-28mm-scale-25408 Cheers Maker Millwright Category: Vehicles
Hey there Tribe, We made this in case you ever wanted to pose with a reload for your warhammer 40k cosplay, also great for the Space marine figures from Todd McFarland. Here is our Sunlu Affiliate link…
Hello Tribe, After seeing a drawing and decided to make a prop based on that. This is a multi piece kit, I hope you enjoy. Cheers Maker Millwright
I designed this as a robust housing for the little K6ARK EFHW transformer. His design uses a proprietary PCB and tiny capacitor. My design allows for the use of larger through hole capacitors. It incorporates a panel mount SO-239…
Hello Tribe, Shhh... We are working on a movable power unit box for 12v dc motors. please enjoy Oh side note both the bottoms are the same one just has some text on it. Here is our Sunlu Affiliate link…
Hello Tribe, With Grimdark cosplay growing every day I felt it would be cool to have a prop of the melta bomb then antitank grenade, plus I feel it would great for 40k photo shoots a strong and fun prop. thanks for look. Here is our Sunlu…
Hey there Tribe; I'm at it again with time a disposable straight razor handle and blade guard, this is slightly smaller in hope to fit it to an ender 3. you can also see I gave the handle a more sloped look. Here's the blade:…
Hello Tribe, In hopes of new Ideas we have designed and made these body pastie Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on Patreon.com/thefreeheathenworkshop check out our book…
Hello again Tribe, After The Ice Cream Monster truck https://www.thingiverse.com/thing:4613826 , I thought who else I do I think need their own Monster Truck, Post Malone. It was really fun to design, I hope you enjoy! Here is our Sunlu…
Hello tribe, I have moved all my easy print designs over to https://thangs.com/u/187535 I have 4 versions of this tank in easy print configuration Cheers Maker Millwright Category: Vehicles
The spool will fit a Fair-Rite - 2643251002 wound in a 15:2 auto transformer setup. It fits onto the center spindle fairly snug so I didn't bother with any zip tie loops in the model. According to what I have read it should be able to…
Hey there Tribe Here we have a Prop Bolt pistol magazine with Inquisitor Logo and Bolt shell, a great prop to go with our Jupiter Pattern Bolt Pistol. We hope you enjoy Here is our Sunlu Affiliate link…
Hey there Tribe, I felt sentimental today so I present you with the key to anyone heart. Edit: I was disappointed in the print with the hearts being do delicate, I added a version with the hearts on the tumbler are full. Here is our Sunlu…
Hello Tribe, Often the buttons on our clothing get smashed at the laundromat, just figured it happens to everyone. these are dia 19mm by 4 mmm tall Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit…
Hey there tribe, i wanted to make a hand plane so I did. the blade is the DiResta Razor. -edit: sorry the nut was too big on the OD so i made a different one. nut v2. -edit 2: I made a v2 base with handles, figured I should add it. Here…
Hello Tribe, I wanted to want to have my own erector set, this set uses 8mm bolts. please enjoy this multi piece kit. Cheers Maker Millwright
Hello Tribe This is the last of our prototype 3d printable pasties, we hope you enjoy. We have been told that carpet tape is how you hold them on. You didn't hear it from us. Be safe out there. Here is our Sunlu Affiliate link…
Transformer for end fed antennas, 49:1. Parts needed: 140-43 ferrite 100pF mica capacitor(optional, needed for higher bands) BNC chassi connector Lab power supply connector or similar 1m approx. 1mm copper wire Tested with 2530ohm dummy…
Hello Tribe, We have another amazing edit by @RealSvyart to design a Heat Blaster. Please enjoy Cheers Maker Millwright Category: Costume
hello Tribe, just a toy tank for you to enjoy, its scale is 28mm heroic. Cheers Maker Millwright
Hey there Tribe, We have been working on making a better workspace, so now you have it the Hunny Comb Shelf. Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on Patreon.com/thefreeheathenworkshop…
The EFHW Antenna EFHW (End-Fed Half-Wave) antennas are popular among amateur radio operators, especially for outdoor activities like SOTA (Summits on the Air) or POTA (Parks on the Air). You can find general information about this antenna…
The Little Dude (Tenna). QRP EFHW with BNC and tabs to snap on Wago connectors. Still PLENTY to do to this, but if you would love to test this out, I would love to see it in action. (Video coming soon) V2 is labeled MiniLite.stl and has…
This is a sotabeams inspired antenna insulator for end fed half wave antenna. It snugly fits carbon6 and tactical mini masts. Tie your end fed half wave to one side like in the picture. Your efhw will form two guy lines of your mast.…
For the Tribe, I had a Boba Fett action figure who's box broke so now he stands guard over The Ender I hope you enjoy this design, its a little weird I know but hey were here for fun. Here is our Sunlu Affiliate link…
I have recently purchased the Sota Beams 7 Meter mast and the drive on stand. When you put the mast into the drive on stand there was too much play for my liking so I designed a mast support. The mast support is printed in two halves.…
Hello tribe, Today's magic box has recessed logo and a elastic band groove. Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on Patreon.com/thefreeheathenworkshop check out our book…
Hey there Tribe, Here is a handle for the DiResta razor knife which should turn it into a Chief's Knife. _edit: I wasn't enjoying the fit of the blade guard when it was fastened it down, I trimmed the edge shown in the pictures, I also…
Hello Tribe, Some simple cryo pods for your wargaming needs, great for Beacon of Doom.
Hello Tribe, We present a crown for everyone to enjoy, the in diameter of the the crown is 8 inches which should give you the ability to scale to size. we suggest lining the crown with eva foam. Here is our Sunlu Affiliate link…
Hello Tribe, We had never designed a trident before, so we present you with a 28mm scale trident. Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on Patreon.com/thefreeheathenworkshop check out…
Hello Tribe, Don't forget to hit that like button This is almost as small as I am willing to make the handle, I have you enjoy. you can get the razor here https://imakeny.com/products/diresta-razor-blade Here is our Sunlu Affiliate link…
Please share this with other printing groups, forums, etc. This winder is a little more Versatile than other iterations. It uses M5x0.8 Threads to allow each dipole post more secure into the winder. SO239, space for a T140-43 or smaller…
EFHW antenna balun case with BNC connector
The box and the cover should be printed with PETG, 4 perimeters, 4 top and 4 bottom layers the mast attachment should be printed with TPU, 15% infill. I use a simple verlcro with a buckle attached.
Hello Tribe, Years ago we used to play VtM, and I had drawn something similar to this now that we live in a world were pictures are now things. I present the Archbishop of New York melee weapon of choice, down with the anidulovents The…
Hello Tribe Please enjoy this flexi print for you seasonal needs
Hello Tribe, As King's day soon approaches we felt it fun, to design our own basic bolter shell prop. We hope you enjoy. Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on…
Hello Tribe, Merry Christmas to my Slavic friends, please enjoy this Christmas tractor its a ez print design.
I got permission from the original maker to post this remix via DM on thingiverse
Hello Tribe, I have created a Weapon for 28mm scale Heroic. Please Enjoy if you would like the complete set please visit https://thangs.com/The-Free-Heathen-Workshop/FHW-Coil-Inversion-Personal-Weapon-set-v11obj-26003 Cheers Maker…
Hello Tribe, We here at the shop make a lot of scifi designs. So, here is a simple Pod bank for your table top needs. https://thangs.com/The-Free-Heathen-Workshop/FHW-Brave-Uusam-Status-tanks-28mm-scale-24708 Cheers Maker Millwright…
Hello Tribe, Just playing around with a truck design. what do you think? I have a ton more designs over on https://thangs.com/The%20Free%20Heathen%20Workshop If you would like to print the ez print version please visit…
Hello Tribe, After watch Jeremy Clarkson's TV show about farming and how much fun it can be. Well I just had to join in I present a Industrial Tractor Monster truck. https://thangs.com/The-Free-Heathen-Workshop/group\_0\_16089887-22475 I…
Hello Tribe, I present the high riding hinge, I used it for a locking mechanism for my glass door. Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on Patreon.com/thefreeheathenworkshop check out…
Hello Tribe, Please enjoy this robot I designed on my live stream today. if you enjoy my work please visit https://thangs.com/The-Free-Heathen-Workshop/FHW-Frustration-class-Squire-v1-24226 Cheers Maker Millwright Category: Vehicles
Hello Tribe, Here is our try at a Melee weapon, this a two handed hammer. Its very Scifi and we really like that please enjoy Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on…
Hello Tribe We all the Salamanders care the most for humanity, they deserve their own Drum magazine. Visit us on Patreon.com/thefreeheathenworkshop check out our book…
Hello Tribe, Who doesn't love a Lil Windex, in that idea we made him a new logo and a huge ring set. Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on Patreon.com/thefreeheathenworkshop check…
Hey there tribe, I felt everyone needs a few more charms for you necklaces, bracelets, and or course your kicks. I hope you enjoy. Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on…
Hey there Tribe, We have used this logo before on my Inquisitor Blackheart Cosplay, so we added it to the magazine to increase the theme. Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on…
Hello Tribe Hello Tribe, I hope you all enjoy this final build for today, its a scifi transport. If you want the EZ print version please visit https://thangs.com/The-Free-Heathen-Workshop/Scifi-Troop-transport-v1-ez-printobj-25721 Cheers…
Hello Tribe, We had give to you the Jupiter pattern Drum magazine for you Jupiter Pattern Bolt pistol Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on Patreon.com/thefreeheathenworkshop check…
Hey there tribe, It happens to be DnD Saturday, so I figured I would release a Key set of props for you and your team to enjoy. Edit: I added a view of the set all together. Here is our Sunlu Affiliate link…
Hey there tribe, I figured since its Friday, I wanted to give you a gift. For you I present the 3 Star Charm, for all you bracelet and necklace wants. edit: add an image of all three designs Here is our Sunlu Affiliate link…
Hello Tribe, After listening to some hip hop this morning we decided to make a more classic look Bolter shell, and for some spice we included a AP round. Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ…
Hello Tribe, A member of our dnd group requested a flying shield that was also usable on their mini. please enjoy Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on…
Hello Tribe, The 3d printing community is all about inside jokes and fun this is a mash up and edit of the following models USS Enterprise 1701 Destruct by JasonTown https://www.thingiverse.com/thing:4245016/files SW Imperial Slave Ship /…
Hello Tribe, I am having a bit of insomnia so I made an edit of the walker with cannon. Please Enjoy https://thangs.com/The-Free-Heathen-Workshop/FHW-Half-track-with-cannon-v1-25474 Cheers Maker Millwright Category: Vehicles
Hello Tribe, Years ago, we saw that someone had made a Militech Crusher for Cd Project Red, but it was using brass cased rounds, when we made the Militech Crusher with Shotgun shells and rails the was to get the very classic look. Its…
EFHW Winder with sealed transformer housing designed for the FairRite 2643251002 ferrite toroid, which performs well up to 100W. The lid can be a bit tight fitting, I had to scale it down to 99% to get it to thread on securely without…
Hello Tribe. I have a deep love for Scifi so I made a set of tanks for your terrian set for wargaming or ttrpg Please enjoy https://thangs.com/The-Free-Heathen-Workshop/group\_0\_16768282-25165 Cheer Maker Millwright Category: Model…
Hello Tribe, I make stuff, Captubes just released a bunch of new cool colours so I made this to test all the filament
Hello Tribe, A replacement magazine for the Jupiter Pattern Bolt Pistol we released thanks for watching Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on Patreon.com/thefreeheathenworkshop…
Hello Tribe, Please enjoy this man catch in the closed, and if you want the set please visit https://thangs.com/The-Free-Heathen-Workshop/FHW-Man-catcher-v11-set-of-two-26054 Cheers Maker MIllwright Category: Props
Hello Tribe, Please enjoy this Heat cannon, and lazer sponsions hard print of my hover tank, if you would like a different version please visit https://thangs.com/The-Free-Heathen-Workshop/group\_0\_15277357-22627 Cheers Maker Millwright…
