Counting matching models…
This tool should fit most standard filament spools. Insert a long hex bit into one side to use a power drill to fill the spool from an other. Print instructions Licence: Creative Commons - Attribution Category: 3D Printer Accessories…
These are test prints for different filaments. They should be printed at 0.2 mm layer high. They are 30 x 30 x 1mm. I have made them for a few samples but I can add more.
This is an addon to the Sovol SV08 Max 150mm ZZ Tophat Replacing the back right corner with a version without any hole. Made after a sugestion from Doug Walker A great care was made to be able to print without much support, so hopefully…
Holder for Orbiter 1.5 with integrated FS. Courtesy of : https://github.com/VoronDesign/VoronUsers/blob/master/printer_mods/spacelab2021/Orbiter-Clockwork/ and…
The idea of this shelve goes back to a clothing rack. I used an oval pipe (30x16mm) and designed an wall mount and a spool holder The spool holder is a remix of the Prusa Mini Spoolholder (for assembly details see…
This is an addon to the Sovol SV08 Max 150mm ZZ Tophat Replacing the back right corner with a version without any hole. Made after a sugestion from Doug Walker A great care was made to be able to print without much support, so hopefully…
Printed Kingroon KPL1 230, PETG, 0.4 nozle, 0.12 Layer, no support - 2 hour.
das kleine teil kann man in das grössere einstecken. da die halter die mitgeliefert werden so klein sind habe ich einen erstellt ,wo man 2 rollen aufschieben kann.
Filement guide 1.75 lack Print Settings Printer: 3D RORO BOT 01 Rafts: Doesn't Matter **Supports:** Doesn't Matter Resolution: 0.2 **Infill:** 30 How I Designed This Category: 3D Printer Accessories
there are two sizes 69mm, 58mm is for both plastic spools and cardboard spools
I've made this because I need a place to put my colors and with my drawer getting full, I've made this so i can make room to look and grab instead of igging for me colors and you don't even need any metal or support.
I needed something that took up little space and was stable and interchangeable without screwing it down. Here is the result. I got the poles from Amazon: HAOYUNTE Pack of 4 clamp rods, 40-70 cm, curtain rod, can be clamped without…
Printed Kingroon KPL1 230, PETG, 0.4 nozle, 0.12 Layer, no support - 2 hour.
This is a shelf for the opengrid system. Might be also usable for Multiconnect system with other mounting snaps. I used the M5 directinoal snaps. Use 4 or 6 M5 16mm skrews to skrew it on the wall. I used 4 for the small shelfs and 3+2+3…
I created a filament holder extension for the original Creality Ender 3 S1 pro filament holder. The extension lifts the filament spool by 6cm. Normal spools can be mounted over an Accante housing with this solution. You can also hook…
A filement guide for the original Prusa i3 MK2S. Probably also fits other Prusa machines, but I only have this one to verify. Print instructions Licence: Creative Commons - Attribution - Share Alike Category: 3D Printer Accessories
this print will require supports and a raft for best results. the 2 circles when finished should press fit together out of 4 prints i have had to glue 1 the slower the better for this print depending on the accuracy of your machine. a…
2 Parts of a Filament holder for my Tronxy X5SA printer. Screwholes for M5 screws Heating: 205 Bed: 65 Filament: GST3D PLA+ silver Printed in CURA 4.12 with 20% infill Time : about 4 hours Print Settings Printer: Tronxy X5SA Infill: 20…
![[Test] Filement guide 1.75 lack](https://media.printables.com/media/prints/1275698/images/9590674_f22b7db9-6344-4e2a-abd0-add6b59b0674_218ba347-4369-4c91-ba88-a2bc884c782a/dc84444cb5bf6dfa898dc15f4b8dadb1_display_large_1275698.jpg)
