Counting matching models…
For my Fimi X8 SE 2020 i designed and printed propeller guards. The fixings are different and adapted to the front and rear mounts of the Fimi. Print instructions printed at 0.20 heigt with 30% infill and Prusament PETG
This mod allows you to attach an external battery to the Fimi A3 Drone, eliminating the old one. As you can see from the photo, I cut the cables from the old battery and kept only the cap. In this I made two holes to let out the power…
Se trata de un sistema sin tornillos para poder colgarse del cuello el mando del Fimi X8 Print Settings Printer: DIY Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: Not necessary supports / No hacen falta soportes para imprimir…
Please note the non-commercial license on this item. You are NOT allowed to print and sell copies of this thing for a profit. Please send me a message if you want to print and sell. This gimbal protector attaches by hooking onto the sharp…
I did not like the complicated design of other tablet holders, including screws and so on.So I designed this one. The tablet will be attached with Velcro. To avoid putting Velcro on my tablet, I just cut the top from a cover and used the…
Please note the non-commercial license on this item. You are NOT allowed to print and sell copies of this thing for a profit. Please send me a message if you want to print and sell. Introduction This is a clip-on sun shade for the Fimi X8…
Here are the parts I designed and 3d printed for my Fimi Manta rc FPV tiltrotor model. The left and right nacelles were printed in LW-PLA and attached using strips of coloured vinyl tape. They have good clearance around the servos and…
Namalováno bez zeslabení které tam dává bosch a tištěno z nylonu s podporou, nakloněné. Po třech měsících používání zatím drží bez ztráty kytičky. Na fotce s robotem je náš kus který je používán minimálně a použil jsem ho pro změření při…
3D Scan of a Fimi X8 SE 2020 for reference when creating a new add-on design. The model is still not scaled right, but should be easy possible. Looking forward to your comments
Xiaomi Drone Front Cover. For FIMI X8 etc.
Botón cinco-direcciones del mando del Fimi X8 SE (Si, el botón que se suele perder...) Imprimir con altura de capa de 0.1mm, muy despacio y con ventilador de capa. Otra posibilidad es imprimir varios al mismo tiempo para un mejor…
True parabolic range boosters for the Fimi X8 SE drone. Print two of each of the STL files to make two boosters, one for each antenna. Use enough perimeters that you don't get any infill in the vertical wall You also need a metallic…
Filtro para drone FIMI X8 SE. Está compuesto de una parte impresa en 3d y de una lente (lámina de plástico) que se coloca a presión. Las láminas de filtro las podéis comprar en Aliexpress muy baratas en el siguiente enlace:…
This is a replacement lid for the BOSCH Profimixx 46 blender. It works best when printed with TPU, which provides a reliable seal for the blender jar. It may also fit other Bosch blenders from that era. Material: eSun TPU 95A Printer:…
Hi! Designed to be printed in vase mode this cover does provide some extra protection to the part of the battery where the actual cells are located and the battery connector, while leaving the external side with USB-C charging port…
If you build this there is no warranty from me if you kill your battery/drone or anything else. I take no responsibility for any resulting failure/demage/missed profit/etc. You can only build and use your own risk. 2019.07.24. Now I used…
the rear motor mount i recommend to print in 100% fill it don't change the weigh much but gain more strong structure
Il mio primo lavoro. Ho usato una stampante Anycubic I3 Mega. Per le pareti interne ho usato del nastro di alluminio da 5cm poi adeguatamente rifinito. Ne ho usato anche nell'incastro per rendere le "parabole" più stabili. Update…
I mixed these two models: https://www.printables.com/model/114214-bike-holder-fimi-x8-controller/files https://www.printables.com/model/80770-klickfix-adapter-incl-cad-file/files This makes it possible to attach the Fimi X8 remote control…
Manta FIMI RC Plane FC base plate
This support fits perfectly, leaving the camera centered on the drone, I screwed it in and put a little glue on the sides for better fixation. You may need to widen the hole a little with a small drill or your own wrench or screw. Esse…
Fimi Manta GPS support for original module
Avevo trovato "SUPPORTO SMARTPHONE TGY-I6S FS-I6S" di Matteo-1978-maker e mi era piaciuta l'idea. Unendo parte del suo lavoro con il lavoro di m1rk00, "FIMI A3 RC SUNSHADE / SCREEN PROTECTION", ho cercato di creare qualcosa anche per il…
Mounted with 6mm dowel and 4x50 screw. Printed with supports under bayonet.
Fiz esse suporte para colocar o vtx por dentro do fimi manta para melhorar a aerodinâmica , mas tem que colocar o suporte da bateria mais para atras ao depender do tamanho/tipo de bateria , fiz também entrada de ar frontais (como na foto)…
[DE] Federgelagerte Smartphone-Halterung: FIMI X8 SE – iPhone 17 Pro Max Dies ist eine funktionale, vierteilige Halterung mit Federmechanismus, um ein iPhone 17 Pro Max (mit Hülle) sicher an der FIMI X8 SE Fernsteuerung zu befestigen.…
Here are the parts I designed and 3d printed for my Fimi Manta rc FPV tiltrotor model. The left and right nacelles were printed in LW-PLA and attached using strips of coloured vinyl tape. They have good clearance around the servos and…
This support fits perfectly, leaving the camera centered on the drone, I screwed it in and put a little glue on the sides for better fixation. You may need to widen the hole a little with a small drill or your own wrench or screw. Esse…
Fiz esse suporte para colocar o vtx por dentro do fimi manta para melhorar a aerodinâmica , mas tem que colocar o suporte da bateria mais para atras ao depender do tamanho/tipo de bateria , fiz também entrada de ar frontais (como na foto)…
Soporte para llevar el mando del Fimi X8 en la bicicleta. Se compone de tres partes, la brida inferior, la brida superior y la deslizadera. Para colocarlo basta con fijar al manillar de la bicicleta la brida superior e inferior. Después…
This is a small platform/holder for a bubble/spirit level, which can be convenient if you want to place the drone level in the field. The platform has been made so it slips over the drone body near the front, between the motor arms. The…
Please note the non-commercial license on this item. You are NOT allowed to print and sell copies of this thing for a profit. Please send me a message if you want to print and sell. This thing is a mount (two mounts, actually) that allows…
The front legs are printed standing (print two of these), and you need good bed adhesion due to the small contact area. Possibly use a brim if you have issues with the print falling over. When finished printing, take a pair of side…
This is a bracket for mounting a Fimi Palm handheld gimbal camera to any GoPro compatible accessory. When printed with TPU it is soft enough for not scratching the Fimi Palm housing. Print Settings Printer: Anycubic I3 Mega Rafts: No…
english This part is designed to hold a battery externally on the fimi a3 I used a bicycle tire chamber rubber (internal part) because this rubber is very flexible , in case you put a bigger battery, more practical than using Velcro, on…
english i designed this piece for the a3 fimi after "trying" to follow an instuction from the fini itself to use a hair dryer to remove the lens and fill with epoxy resin, but in the procedure using the hair dryer the right casing of the…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/hbgwOCQpW8y Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 0.16 Infill: 12% Filament: SUNLU PLA White Notes: Any material does the…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4TdPiY7BeYf Category: 3D Printing
I got a replacement X8. I was hoping it wouldn't get out of this. But Fimi still can't stick a foot in the frame. In this new X8 there is no holes in the rubber. So I designed a new leg with no holes, which surface can be lubricated more…
FIMI X8 mini Landing gear(foldable) Preparation: (drill blade 2mm) & (screw M2X10mm 4) リミックス希望 装着には最初に後方を入れる レイヤー高さ：0.2 インフィル：100％ サポート：必要（同心円が良い） ビルドプレート密着性：ラフトが良い
日本語で記入 私のスマートフォンは厚くてコントローラーに入らないので作成 必要性があればダウンロードして下さい 2個印刷 コンパクトに収納 リミックス可能
This is a remix that basically ensures that the assembly be as sturdy as possible from the original. In all fairness, the original was great, except, I felt that the brackets and base should be printed in one solid piece which is what I…
My Fimi X8 SE 2020 came with a broke right stick. Replacement is hard to find so I made this repair stick that replaces both Stick and the half Bowl, which was broken in my case. You have to open the remote (just two screws under the…
I used a lite bit of foam on bottom and top to prevent scraching, I used fuzzy skin
This is a remix of jumpshoutmedia's Tablet Mount to make it work with FIMI X8 remote. FreeCAD source included. Category: R/C Vehicles
