Counting matching models…
I used Revopoint Miraco 3d scanner on my Fisker Ocean break pedal. Used hairspray to acquire scan. Used Revo Scan 5 to import and merge. Tried doing a little smoothing on it. It needs work. Feel free to remix and fix any flaws of the scan…
This is the inner door handle insert. Some Oceans inserts are cracking under the sun. Be sure to use ASA filament for UV protection. So far all ASA filament I have used makes it light up warm white, not cool white like the stock part. If…
Initial release. The small hole should align with the factory screw. The additional 3 holes are for retainers. I included photos of the two types that I sized it for out of a retainer kit I had. Be sure you measure exactly what size you…
This small hood for the FCM prevents glare from the sun
Contains the outer facia on door handles. This does NOT have the tiny tabs the OEM one did to “snap” in place. Must use some glue to keep them in place. Its best to use ASA filament because of the UV protection. Ignore the blue tape--…
Our Fisker Ocean frequently loses contact with the key, resulting in errors where the car thinks there's no key in the car. This simple holder solves that problem by holding a key card or a key next to the NFC reader. Print in a vertical…
Update: Somebody remixed a better version with a hollowed-out back. Please use that model instead: https://www.printables.com/model/961122-fisker-ocean-inner-door-handle-insert-hollow This is the inner door handle insert. Some Oceans…
Large water bottle & mug holder inserts designed for the Fisker Ocean. We use a lot of larger water bottles and coffee mugs in our house and wanted to make the cup holders a bit bigger to handle them, so we made these cup holder…
A simple tool made to help with removing the ICC HSD connectors, particularly useful when installing a Pulse unit! Easier way to use this is to clip it in from underneath the connector. It is designed to retain itself on the male end of…
This sleeve is meant to be used to help folks with the sealing of the circulation pump that Kristian talks about in his excellent DIY video: You would just slide this into the opened pump before spraying the electronics sealant to keep…
Using Brad Bauer's door handle facia as a base for dimensions, all I did was slim it down slightly, and add 1.9mm tabs all around. This was all done in the slicer so don't come for me! lol Note, I test fit this on my own Fisker Ocean…
Print this with ASA or PETG for UV protection, and resize it to 100mm wide. This is a 3D printable replacement emblem for the Fisker Ocean if you'd like to print your own. It's very easy to detach the original Fisker emblem from both…
For those that choose to remove the aero-shields on their factory wheels, these cover that center hub.
SAE-Port with cabel set, to plug in to the attachment point for the recovery eye The cable set, pluged into the adapter (3D print) and secured with shrink tubing: Cable set is with fuse from Amazon…
Print with 7 Walls ( enough wall thickness) and zero infill best results with PETG print on the "INPUT"side to print without supports add 5mm screws
Lifting puck for Fisker Ocean This model is based on another model online, but I drew it from scratch to improve the design. This one goes further inside the lifting point on the car, has a less high part where the car lift is, so it…
With a little sanding the wheel can be mounted on a 608ZZ bearing
The intent is that a user would print this and then attach a topper that would be made to fit your cup holder of choice. The top of this base is just above the high points around the factory cup holder. When adding to a topper you may be…
This is a top meant to be mated with the Fisker Ocean cup holder bottom (https://www.printables.com/model/943163-fisker-ocean-cup-h). Paraboloid shape to fit my wife's favorite cup. When mated you can cut about ¾" off the bottom of the…
Topper to fit the 32oz Hydro Flask-brand water bottle. Use with base(s): https://www.printables.com/model/943163-fisker-ocean-cup-holder-base-front-seats https://www.printables.com/model/943690-fisker-ocean-cup-holder-base-back-seats
The intent is that a user would print this and then attach a topper that would be made to fit your cup holder of choice. The top of this base is just above the high points around the factory cup holder on the rear seats. When adding to a…
Print with 7 Walls ( enough wall thickness) and zero infill best results with PETG print on the "INPUT"side to print without supports add 5mm screws
Using Brad Bauer's door handle facia as a base for dimensions, all I did was slim it down slightly, and add 1.9mm tabs all around. This was all done in the slicer so don't come for me! lol Note, I test fit this on my own Fisker Ocean…
I used Revopoint Miraco 3d scanner on my Fisker Ocean break pedal. Used hairspray to acquire scan. Used Revo Scan 5 to import and merge. Tried doing a little smoothing on it. It needs work. Feel free to remix and fix any flaws of the scan…
Custom brake pad replacement for Fisker Ocean. Best printed in TPU, other flexible materials may work well also. Designed to fold up at the bottom for easy installation.
Simple sheath for pointy Fisker scissors. Giant Arm TPU, 0.4mm nozzle, 0.2mm LH, 15% infill using Prusaslicer defaults for generic TPU on powder coated PEI with Vision Miner Nano Polymer adhesive. A Fusion 360 file (f3d) is included to…
