Counting matching models…
I wanted a version of these excellent corner brackets by @3D_Workshop that has one hole chamfered and one flat, so I remixed the 32mm size. I used the chamfered side with tapered sheetrock screws to mount to the wall and the other with…
Filament: Tough PLA Print Surface BuildTak (fine textured) Layer Height 0.12mm (or lower) Top Fill Pattern Concentric Bottom Fill Pattern Concentric Fill Density 100% Extrusion Multiplier 0.98 Elephant Foot Compensation 0
This is to be sure to make the flats at the good places on the propeler shaft.
This is a bezel to convert an old IMac to a flatscreen display since the old display is a CRT monitor there needs to be a round bezel on the flatscreen to fill the gap. This started as a project of mine to run a raspberry pi 4 in a IMac…
Simple housed light source utilising dimmer to accurately achieve your FLATS up to a OD OTA diameter of 186mm Keeping your exposure time to what you want you can just adjust the dimmer to suit that exposure time, as required. If you do…
Tool to remove SR Suntour top caps for service. Changed to a 3/8in square drive, and added wrench flats for adjustable
I remixed this from something I found (though don't remember anymore where). This is a flats panel for taking flats used in astrophotography. Simply insert the 5" EL Panel (circle) into the base, glue the insert into place. The cap should…
Keep your workbench tidy with this screwdriver organizer. Large base has wells for screws while you're working. 0.20 mm layer height 0.40 mm nozzle 15% infill no supports needed bonded with superglue I was tired of using the plastic it…
Print two pieces and use rubber bands or Velcro straps to flatten out milk pouches to store and organize multiple pouches in the freezer
Keep your workbench tidy with this screwdriver organizer. Large base has wells for screws while you're working. Underside has wells for 18mm magnets to keep those screws from going everywhere. 0.20 mm layer height 0.40 mm nozzle 15%…
A near-future 2030s apartment block featuring stacked prefabricated units with colorful panels and balconies. Inspired by modern modular housing, this design offers a clean, photorealistic PBR aesthetic with unlettered surfaces. For best…
Cam Example for my CNC CAM Flatstock Tutorial
I designed and used it with the Kohler GP51487 tank gasket kit, may work with others. The nut is 62mm across the flats, I've added 1mm for clearance. After hand tightening the nut, you're supposed to turn the nut an additional quarter…
A Parametric Light Box for Astrophotography Flats Case and OTA adapter for an Ellumiglow round panel: https://www.ellumiglow.com/electroluminescence/astrophotography Render STL using OpenSCAD: https://openscad.org/ Edit flat_box.scad to…
No special requirements on this print. There is no support needed and I printed it in PLA with 5 perimeter walls and 20 % infill to be strong enough.
shortened the tool and added flats for a large wrench and a hole in the middle.
This detailed model captures the classic mixed-use architecture of urban shop flats. Inspired by traditional town buildings, it features distinct ground-floor retail spaces and upper residential levels. Use supports for the overhanging…
This detailed scale model captures the iconic architecture of traditional Low Flats. Inspired by real-world heritage structures, it features authentic brickwork and window patterns. Print with supports enabled to ensure the overhanging…
A parametric (OpenSCAD) generator that will generate a pair of press fit rings to make a diffuser from a white t-shirt to use as a flat field generator. This is an alternative to my twist lock diffuser ring. This is sized to fit the…
This detailed model captures the industrial charm of converted tram sheds now used as residential flats. Inspired by real-world urban regeneration projects, it features authentic architectural details and textures. Print with supports…
I designed and used it with the Kohler GP51487 tank gasket kit, may work with others. The nut is 62mm across the flats, I've added 1mm for clearance. After hand tightening the nut, you're supposed to turn the nut an additional quarter…
A parametric (OpenSCAD) generator that will generate a pair of press fit rings to make a diffuser from a white t-shirt to use as a flat field generator. This is an alternative to my twist lock diffuser ring. This is sized to fit the…
Filament: Tough PLA Print Surface BuildTak (fine textured) Layer Height 0.12mm (or lower) Top Fill Pattern Concentric Bottom Fill Pattern Concentric Fill Density 100% Extrusion Multiplier 0.98 Elephant Foot Compensation 0
A simple replacement knob made to fit a shaft with two flats. Includes an indicator on one end of the handle.
Need vehicles that your RPG minis actually fit in? Don't have room to store dozens of vehicles that you'll only use once? The grab some vehicle tokens from Drive-thru RPG and slip them into these trays. Lots of sizes included or use the…
Office or flats for hotel building play set Category: Art
150mm Vixen Dovetail with slots for 10x1mm steel flats
