16 models
These are the parts I custom designed for my VTOL Stallion. Stallion drawings can be purchased on Flightory website. The servo door is for Emax ES09MD, check for compatibility. The servo doors and FC holders use brass M2 inserts (Length…
Print using any filament with >4 walls >20% infill and it will hold fine.
16.01.2026 Added V2 version. Better printing, added plate for usb board, fixed position of mounting holes. Used PETG-CF Holder for FC Stallion FPV model I used ABS, 20%infill, 3x top, 3x bottom, 3x wall. It is mounted to carbon rods can…
Uniones entre flaps y el ala del avion / Hinge unions 20x20 mm / Tpu / 100% infill
Remixed this excellent F405 Wing mounting for use in my Flightory Stallion build.
A simple inspired design to mount a Pixhawk 6x or Cube FC and a Tekko 4in-1 ESC into the Flightory Stallion airframe. Used M3 to mount the ESC and M2 for the FC. Recommend using washers for mounting the FC.
Motor holder for Flightory Stallion, which isch more stable comparing to original solution.
This simple canopy allows the user to mount a 30x30 split camera on a 360° pan servo. To mount the camera to the servo I used a simple metal 20mm camera holder and 2x wood screws into the servo horn. Air channels are provided to properly…
This part can be glued under the wing to locate and verify easily the CG before every flight ! Happy flying :D
Plane is available on Flightory website : https://flightory.com/product/stallion-vtol/
In case you see RED on your fuselage the lock is not latched correctly and you need to check it. Green means GO. This lock enables the user to quickly spot a mistake in order to rectify it before flight! You still need part 2 and 3 to…
This is an adapter for each wing of the Stork model from flightory. It is mounted between segments 1 and 2 of both wings. It helps to join both segments. A 20A ESC fits underneath. The cables come out from under the motor and go directly…
Flightory - Super Stingray servo holder Servo model: EMAX ES08MAII
Mount board for Mateksys F405 Wing V2 and ESC 4in1 including GPS, elrs and antenna mounts.
Remix of existing 19x19 to 16x19
Uniones entre flaps y el ala del avion / Hinge unions 20x20 mm / Tpu / 100% infill
