Counting matching models…
Some time ago I got one of these mini GPS units to put on my quad after I lost the previous GPS unit in a crash. Turns out this unit is quite decent and, comparatively, pretty cheap so I'm quite happy with it. One problematic thing was…
Breathe a sigh of relief, this will work fine for their garbage FPV cam mount design. Print with 100% infill in TPU.
FlyFishRC Volador VX3.0 VX3.5 VX5 Vibration Dampers for 19mm Camera TPU. Found the original silicone ones are way to soft for a 19mm analogue camera. I couldn't find an STL online so i made one.
I redesigned the antenna mount for easier storage and transportation. 20240902:Upadted Folding Antenna Part 2.
Print with TPU and tree support. Version 2 has a small overhang to protect the cam. The GPS is rotated 180deg to get the cable throught the top plate. Everything gets better with coffee! https://ko-fi.com/pixbalance
This support is designed to be attached to the top spacer of the cam plates. Place the GPS inside the support. Fold the support around the spacer with the two legs going inside the bridges. Screw the support in place using the top plate…
FlyFishRC Volador 2 VX5 - dual antenna holder (Waksnail Moonlight Kit)
M100 Mini GPS Holder For Flyfish Volador I provided the 3mf file to make it easier to make adjustment if you need to.
Print with TPU, no support needed. Everything gets better with coffee! https://ko-fi.com/pixbalance
I made a flyfishing case for a friend. Dim.140x105x40mm with 4 sides to mount the flies. I share top STEP file so you can put your own name if you want. I use 2mm stainless steel tig welding pin for the hinge. Printed with Verbatim PETG…
JeNo 3 mini aileron avec mini GPS FlyFishRC M10 integré
Pour la version Jeno 5.1" - 1.5.1 1 Porte Module DJI O4 Air Unit Pro + GPS Flyfish M100 Mini J'ai modifié et intégré le fichier Officiel du GPS téléchargeable ici 1 Cale Module DJI O4 Air Unit Pro 1 porte double antenne DJI O4 Air Unit…
Compact antenna and GPS mount for Volador VX3.5. The VTX antenna mount requires trimming down the plastic antenna tube to fit. Sized to fit the antennas from a dual antenna Walksnail VTX, but will also fit DJI O4 Pro antennas. Supports…
Simple capacitor holder for Flyfish Volador 3.5 and rotated FC, where power wires are on the front side of the drone.
This is a mount for the Foxeer m10Q 180 for the FlyFishRC Volador VX5, that includes provision for an SMA mount and a USBC connector that can be wired for Walksnail Avatar
Front GPS holder for the Volador II VX5 O3 FPV Freestyle T700 Frame by FlyFishRC. This GPS holder, made for 25 x 25 mm modules such as the Team Blacksheep M10Q, which also includes a magnetometer, uses the same hole pattern as the…
Aft GPS holder for the Volador II VX5 O3 FPV Freestyle T700 Frame by FlyFishRC. It mimics the concept of the default 3D-printed GPS holder included with the frame, but enlarged for a 25 x 25 mm GPS module, such as the Team Blacksheep…
After crushing my Cap I designed this to be able to mount it to one of stand offs I have a 35v 470uF cap. 3mf flies uploaded so you can make adjustments if you want.
Flyfish Volador VD5/VX5 O3 and GPS Mount Features: Designed for Flyfish Volador VD5 and VX5 All-in-one mount for the DJI O3 stock antenna and a micro GPS With and without the Omni Protection Print Settings Printer: Creality Ender 3…
A CRSF + FlyFishRC M10 mini GPS holder for the iFlight Nazgul Evoque frame based on my base GPS holder and DJIBryan 's excellent holders for other GPS units .
If you bind your own flies and need to stack the hairs, here's your gadget! Knurled lower half for better grip. Print the 2 cylinders in any hard plastic, PLA, petg, ABS, PC etc and the little plug in TPU to avoid damage to your stuff.…
For the Flyfish Volador VX3 / VX3.5 Single antenna mount lollipop style I have added a mount to hold a GPS unit on the rear, This is for an 18x18 GPS unit ( Im using the TBS m10 unit) Printed in TPU 0.2 layer 15%, I have attached the 3MF…
original design is by FabianP on Cults 3D
adjustable 04 pro camera, dual antenna mount, and top GPS mount made with TPU
A mount for the GEPRC 25x25mm GPS modules, which fits where the GoPro mount is intended to be. Tested with the Volador II and GEP-M1025Q, but most likely compatible with at least all the other Volador frames and GEP 25x25 gps modules.…
remixed from: https://www.thingiverse.com/thing:6523720 and https://www.thingiverse.com/thing:6928153
Antenne Dji Air Unit o3 + mini GPS FlyFishRC M10
Simple flotant holder for 15ml bottle
This is a simple mount for the DJI O3 Stubby Antenna made by FlyFishRC. I got tired of breaking the stock antenna, but with the stubby antenna and this more protective mount I haven't broken one since. The antenna can be found here:…
Diese passgenaue GPS-Halterung wurde speziell für den Volador II VX5 FPV Freestyle T700 Frame von FlyFishRC entwickelt. Sie bietet eine sichere Steckaufnahme für das BN220 GPS-Modul mit einem Aussenmass von 20.5 × 20.0 mm . Kompatibel…
Print with TPU and tree support. Version 2: Increased wall thickness High border to hold cam Everything gets better with coffee! https://ko-fi.com/pixbalance
This is an axii mount for the volador. there are three models uploaded. The part one and two is split for easier printing. By splitting the model you can have it two different colors. This mount should be compatible with the lumenier axii…
Model made from: original GPS Mount stl available here: https://iflightrc.freshdesk.com/support/solutions/articles/48001238224-nazgul5-v3 "FlyFishRC M10 Mini GPS Reference Model and Reference GPS Holder" available here:…
TPU 50% Gyroid Infill
So, I already had regular M10 GPS and decided to attach it to tiny FlyFishRC VX3.5 drone. I'm not shure about that front tooth for covering antenna, just wanted to protect somehow and not to use too much plastic. But if you don't like it…
📄 Description This is a custom-designed mount for the BZ-181 GPS module , made specifically for the FlyFishRC Volador II 5-inch frame. The mount provides a secure fit and keeps wiring tidy, while maintaining a lightweight and durable…
Took the base file from @maximotep this is made only for the mini m10 gps from flyfish.
I created this adapter to fit a SA scientific anglers spool together with some Rio spools. Printed in PETG with support 0.10mm layers 20% infill. The original SA "connector" is transparent and very hard to remove, did it by tapping softly…
GPS mount for the Flyfish mini M10 GPS. Printed in TPU and 0.25mm layer height. Support is not needed but the bridge can look better if you do. If you like my designs please consider donating a coffee or any amount really, I appreciate…
FlyfishRC M10 mini GPS front mount for SpeedyBee Mario 5 frame. Material: TPU95, infill 20%. Support: yes.
Support for the GPS Flyfish micro M10 for the GEPRC Smart35. To put on th top of the top plate
Remix GPS mount FlyFishRC Atlas 4 for Mini GPS HGLRC M100 (15 mm x 15 mm x 5,2 mm) Fusion 360 file Category: R/C Vehicles
pferectly fits the HDZero Antenna from the Freestyle V2 VTX bundle. the long shroud covers the whole antenna head for better protection but maybe worse detuning ? in photo is of the 65mm short shroud version. The 68mm version is the…
This is a remixed version of the FlyFishRC O3 Antenna Mount so that it fits the new Volador VD4 Frame. Print in TPU Original design by FlyFishRC
TPU for the flyfishrc gps with a JeNo 5.1 cine plate
Flyfish atlas lr4 O4 camera cage, 22 degrees The camera cage is printed from petg and damper from 85a TPU To print duplicate and mirror the cage and the damper for the opposite side inside your slicer Cage - PETG Damper - 85a FreeCad file…
This is a silly idea that I had and probably not a good one. Why mount an action camera in the front of a quadcopter if it can be mounted in the back? What could possibly go wrong? This was sketched up far too quickly and could be…
Caddx Vista Mount w/ FlyfishRC stubby and ELRS antenna holder Can be used without any screws - the walls on the sides holds the vista in place Comes with mounting holes for either 20x20 or 25x25 Can hold different stubby antennas - i used…
Seatbelt mounts that fit the maple light and flyfish osprey antennas (Two of the cheapest lollipop style antennas) to fulfill race directors wishes. Print out of TPU, fine setting with tree supports on.
Dji Antenna - Nano m10 flyfish GPS - ERLS antenna - XT60 Mount FPV
▶ More builds on my channel: youtube.com/@fpv-geek Yesterday I tore off both original DJI O3 antennas flying a bando. So I switched to a FlyFishRC Osprey 40 mm stubby and designed this TPU mount for my TBS Source One V6. The antenna sits…
original design is by FabianP on Cults 3D
Breathe a sigh of relief, this will work fine for their garbage FPV cam mount design. Print with 100% infill in TPU.
So, I already had regular M10 GPS and decided to attach it to tiny FlyFishRC VX3.5 drone. I'm not shure about that front tooth for covering antenna, just wanted to protect somehow and not to use too much plastic. But if you don't like it…
Took the base file from @maximotep this is made only for the mini m10 gps from flyfish.
Side covers to protect FC/ESC, included option of opening and plug for FC USB-C Port.
For the Flyfish Volador VX3 / VX3.5 Single antenna mount lollipop style I have added a mount to hold a GPS unit on the rear, This is for an 18x18 GPS unit ( Im using the TBS m10 unit) Printed in TPU 0.2 layer 15%, I have attached the 3MF…
Side covers to protect FC/ESC, included option of opening and plug for FC USB-C Port.
