Counting matching models…
print with 100% infill PLA works fine but PETG is recommended. Set z seam to random The hole is exactly 2mm to fit a motor shaft but will shrink during printing, it's a tight fit but holds on very well, I used a hammer to push the…
3D printable piece, designed to work with the flywheel puller metal part made by Fetteworst, to pull any Daybreak, Kepler or Pulsar wheels (or any other wheels with the same top geometry) off a motor shaft, without risking bending the…
So I needed some simple flywheels for my gryphon build, couldn't find them…. Comments on how I can improve them are greatly appreciated!!
Here are 4 models of flywheels you can use with your engine. you are supposed to mount these flywheels onto part 4185 with technic pins, as shown in the pictures. The flywheels are supposed to be manufactured by CNC machining or metal 3D…
UPDATES: 04/02/24 1.5mm fillet added to cage to prevent extension spring sticking to the side of the cage (hand filing the side of the cage will also help clear this) 27/12/2023 Published This is a remix for GnK-90 that adds new cages and…
UPDATES: 01/06/2026 Updated tolerances on Upper Front, Rear, and Top Rail, alongside more space for the ESC. Thicker Cage Mount Front, means barrel is less likely to wobble around and come loose Cage Roller added to Cage Mount Front,…
UPDATES: 27/08/2026 Fixed TPU mounts not fitting to cage properly New cage plates with more material around holes 30/07/2026 New flywheel cage! This now consists of one printed part, and 2 metal plates to mount the motor. Plate .step file…
Worker Hurricane Flywheels Custom flywheels made for the Worker Hurricane Designed for smooth operation, solid grip, and clean performance while keeping the wheels lightweight and easy to print. Great for standard builds, replacements, or…
This is a set of models for the Nerf Gryphon by Flygonial. These files will let you use Worker Hurricane flywheels or Kuryaka Pulsar flywheels with the longer barrel and a lot of picatinny rail. The 33.5mm spacing is intended Hurricane…
I redesigned the Flycore to have more crush with Worker Hurricane Flywheels. (Root diam. 25,75mm)
These are high crush flywheels inspired by daybreak and pulsar flywheels, however they only work with stock stryfe cages (43.5 mm). I am using them in a Dart Zone Spectrum 42 mm cage, which is the cage size limit. I would highly recommend…
It’s a double stage rival flywheel cage what did you think
These are the modifications of some shell parts of the GearsVector. Make it able to install WORKER Hurricane flywheels with a smaller size shell. However, this mod is only compatible with the OFD FLYWHEELCORE of 32.5mm. Category: 3D…
Midsize flywheels are my favorite! Here are flywheel/motor cages in 32.5mm, 33.0mm, and 33.5mm spacings. 32.5mm, Pulsar wheels, Kraken or similar motors = very nice 150 FPS 33.5mm, Hurricane wheels, Valkyrie or similar motors = very…
I used the Neon 2207 v2|2550kv motors and put an M3 screw in the hole on the dart guide to prevent the magazine from going too far. Make sure you put the wheels in the right direction; they will act as a fan to cool the motor and prolong…
Print with same settings as the original
UPDATES: 01/06/2026 Updated tolerances on Upper Front, Rear, and Top Rail, alongside more space for the ESC. Thicker Cage Mount Front, means barrel is less likely to wobble around and come loose Cage Roller added to Cage Mount Front,…
UPDATES: 30/07/2026 New flywheel cage! This now consists of one printed part, and 2 metal plates to mount the motor. Plate .step file included, can be cut via JLCCNC or sendcutsend. Edits on Upper front + Rear to make the flywheel housing…
UPDATES: 01/06/2026 Updated tolerances on Upper Front, Rear, and Top Rail, alongside more space for the ESC. Thicker Cage Mount Front, means barrel is less likely to wobble around and come loose Cage Roller added to Cage Mount Front,…
