Counting matching models…
These nine decorative trees based on fractals have increasing levels of complexity, with Tree #1 printing in 1 minute and Tree #9 printing in over 9 hours. I was inspired to design this project using Vase Mode after printing some…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
For one of the pictures I used Crealty Hyper White. For the more defined white I used eSUN PLA Basic Cold White. Approximate TDs: Crealty: 7 eSUN:3 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Purple At layer #13…
Print approx. €2.81–€3.43 excl. taxPreliminary estimate for one variant
Hueforge settings .08 layers with a base layer of .16 Start with Black Change to dark grey at layer 9 (.8) Switch to light grey at layer 12 (1.04) Finish with white starting at layer 16 (1.36)
Print approx. €3.88–€4.74 excl. taxPreliminary estimate for one variant
Introducing our newest creation: the Articulated Forest Dragon! 🐉 Embark on an enchanting adventure with our intricately designed 3D printed toy, perfect for young explorers and dragon enthusiasts alike. Now available in a convenient…
I got my game second hand, and it didn't have any insert inside, so I set out to design my own, as I couldn't find any that I liked. This insert will: Fit the cards with sleeves of up to 92x62mm Fit the base game and should easily fit all…
A detailed two-color 3D printed ornament perfect for Christmas tree decoration. Easy to print, supports not required. Great as a holiday gift, home decor, or a small seasonal present. Includes a clean, high-quality model with a hanging…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 55x163.62mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2mm and the Actual Depth is 2.1mm…
Forest and Mountain Wall Art
🐌 Forest Snail House – Whimsical Fairy Cottage Bring a touch of enchanted forest magic to your print bed with the Forest Snail House – a charming, storybook-inspired miniature that looks like it grew straight out of moss and moonlight.…
Join here to get access: https://www.patreon.com/kogi3d 🐉 Fully Articulated Forest Dragon This fantasy dragon features a fully articulated body with lots of movement, while the legs can rotate independently to give you even more freedom…
🍂 Forest Leaves Leaves are one of the most colorful treasures of the woodland world — and this set brings together three of the forest's most recognizable leaves: the maple leaf 🍁, the oak leaf 🌳 and the beech leaf 🍃. Each has its own…
A large, damaged, forest shrine piece of terrain for your tabletop games. If you like this free model please take a moment to check out our Tribe over at MyMiniFactory where you can get 20+ models every month for as low as $1.00...…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP Low-poly dragon with leaf-like textures, soft earthy…
FOREST VASE For this vase, I wanted to highlight a wood grain texture by dividing the vase into four parts and changing the scale and orientation of the texture. The desired effect is the contrast between the natural look of the vase,…
A rugged fantasy archer inspired by classic centaur legends, ready for tabletop adventures or shelf display. The pose and bow make it perfect as a ranger, hunter, or mythic guardian character.
white until 2.8mm finish with red
This is a 3D printable fog light hole cover designed for the 2008 Subaru Forester. It is made as a replacement or custom cover for the front bumper fog light opening. The model features a round outer frame with a slotted grille-style…
An organic goblet derived from the tree of life. Can be used as an interesting vase. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: Yes Resolution: fine - .1 mm Infill: 20% Notes: Best to print as large…
This Ancient Tree Planter turns a flower pot into a fantasy forest character, with a detailed tree-stump body, sculpted face, twisted roots and broken branch shapes around the rim. The deep planting space makes it perfect for succulents,…
This decorative vase features a bulbous base that narrows into a flared, ruffled rim. Long, twisting root-like strands spiral from the bottom to the lip, with layered bark-style texture, while the lower half is densely carved with…
A small discrete insert that fits into the existing plastic tray in the box to hold all the tokens with minimal filament and allowing for vertical storage. My print in the photo is hashed as I print without tops/bottoms/walls to save on…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
A replacement print for lost or damaged movers from the Enchanted Forest Game. I recommend printing it upside down with supports to the base plate only.
a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…
Beautiful Christmas decoration, just insert the LED light.
This chunky little bear has parked his paws and is patiently waiting for snacks, compliments, or both. With wavy carved fur and a calm “I’m just vibing” face, he’s perfect as a desk buddy, nursery décor, or part of a woodland set. Prints…
This Halloween Krampus looks like he just emerged from the darkest forests. 🌲👺 With his towering horns, feral grin, and a wicked trident in hand, he embodies the fury of folklore legends. The detailed fur texture, clawed hands, and…
Replacement part for the sliding part in the center vent. The whole vent section on the Forester can be popped out by using a screwdriver to pop up the clips above the screen, on the sides and and below the vents. Once popped out you can…
Use the 3ds max 2020 version or later. I didn't remove the spline lines in the project, so feel free to change
The cute articulated forest dragon just got given the glass eye treatment! :) Two variants provided in 3mf form. One is for keychain and the other isn't. Files are named accordingly. No supports or brim used. Very easy print. UPDATE: STLs…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP Low-poly dragon with leaf-like textures, soft earthy…
Found this wonderful models of a druid and a suiting forest base plate that I combined because I thought they fit very well together. All credits for the models to the original creators.
this is a very hard print if you make it giant [which I tried.]
Enjoy this enlarged version of a United States Forest Service Shield. Optimized for Wall Décor, it will look great on your office wall! See my profile for other Forest Service wall décor. The model has been optimized to print on an Ender…
The spherical concavity adds rings similar to topographical lines, with each layer showing the alternating fill direction of the nozzle -- I think these add a nice texture to the top surface. Here are some sizing suggestions, Small:…
Roblox The Owl 99 Nights in the Forest fingers are thin! Remove the supports carefully. Remove the support arms very carefully. I adjusted the left leg from the front using a lighter, as there were problems with the centre of gravity.
A highly detailed forest wraith dryad 3D printable model, depicting a skeletal woodland spirit formed from twisted roots, bark, and creeping vines. Designed as a non-functional display statue, this STL is ideal for dark fantasy…
Replaces Subaru oem 92183 cap coin tray with a flat alternative that replaces the indents with a flat panel that stops dirt and dust from lingering in it.
A beautifully detailed verdant forest stag guardian 3D printable model, depicting a majestic deer-like creature formed from living wood, leaves, and natural growth. Designed as a non-functional display creature, this STL is perfect for…
A peaceful fairy laying on her side, gently holding leaves like a tiny forest guardian at rest. Soft, storybook vibes with a clean silhouette—perfect for painting, gifting, or adding to a woodland display.
🐾 Abstract Minimal Animals – Forest Set (Low Poly) This set includes four minimalist low-poly animal figures designed in a clean, modern geometric style: Fox, Bear, Deer, and Wolf . The models are intentionally highly simplified ,…
Forest Axe Mimic - Print-Ready Miniature by Mike Gyver Minis! ⚔🎲 Beware the woods where even the tools turn to teeth with this vicious Forest Axe Mimic , perfectly camouflaged as a discarded weapon embedded in a weathered stump. This…
Command the power of the wild with this Forest Guardian Druid King, a majestic nature-bound warlord sculpted for high-impact display and tabletop dominance. Crowned with branching antlers and clad in bark-like armour fused with moss and…
FOREST VASE For this vase, I wanted to highlight a wood grain texture by dividing the vase into four parts and changing the scale and orientation of the texture. The desired effect is the contrast between the natural look of the vase,…
Graceful yet untamed, this Forest Dryad Archer embodies the spirit of the ancient woods. With branching antlers, flowing bark-textured limbs, and roots entwined around her feet, this woodland guardian feels alive with nature’s magic. Her…
This Cute Mushroom Forest Sprite brings charm and whimsy to your fantasy collection. With its oversized spotted toadstool cap, tiny rounded body, and simple expressive face, this chibi-style woodland character is perfect for collectors…
Step quietly… the Forest Wanderer is passing through. This charming yet mysterious gnome looks like he stepped straight out of an ancient woodland tale. Supports are needed. I used organic-style supports, which peeled off cleanly with…
🐌 Forest Snail House – Whimsical Fairy Cottage Bring a touch of enchanted forest magic to your print bed with the Forest Snail House – a charming, storybook-inspired miniature that looks like it grew straight out of moss and moonlight.…
Forest Shuffle Insert – Design Overview This custom insert for Forest Shuffle is designed with the following goals: Minimize plastic use in the final product. Maximize space efficiency within the game box. Final Product Features: Zero lid…
Bring a touch of natural elegance to your space with this Circular Tree Wall Art Model . Featuring two intertwining bare trees framed within a clean round border, this design blends minimalist style with symbolic depth. Perfect as modern…
This Forest Guardian Knight blends steel and nature into one striking fantasy sculpt. A fully armoured paladin stands firm, sword planted at his side — but from beneath the armour, living wood emerges. His leg twists into ancient roots,…
This terrifying antlered forest demon crouches low among broken branches and snow, its skeletal deer skull face framed by towering antlers. Emaciated ribs and elongated limbs give the creature an unnatural, predatory silhouette — a…
This enigmatic raven witch stands poised upon a suspended branch, her hood casting shadow over a faceless presence. Two ravens perch calmly at her sides, serving as omens, familiars, or silent messengers of darker powers. The sculpt…
Bring your woodland battlefields and forest dioramas to life with this highly detailed hollow tree stump terrain piece. Featuring deeply textured bark, exposed roots, creeping vines, and clusters of mushrooms, this sculpt captures the…
Design Concept The design reflects the majestic stature of the forest elephant, portraying a dynamic pose that symbolizes awakening and emergence. It's sculpted with attention to intricate details, highlighting the textures and features…
This detailed satyr-inspired sculpture blends human and woodland creature elements into a striking fantasy character. Featuring pointed ears, expressive facial features, and fur-covered lower legs with hoofed feet, the model captures the…
Hidden deep within forgotten wilderness, this Ancient Forest Guardian Head emerges from stone and vine. The sculpt depicts a colossal carved face, partially reclaimed by nature, with twisting roots, creeping vines, and moss spreading…
From the depths of a cursed woodland rises this Haunted Skull Tree, a chilling fusion of nature and nightmare. Twisted roots and gnarled branches spiral upward into a skeletal visage embedded within the trunk, its hollow eyes and open jaw…
A stylized 3D printable sculpture of a winged nymph/fairy. Features large, expressive wings and a stable base for easy display. The photos show the model printed in black and white PLA. It handles scaling well, from small figurines to…
A replacement print for lost or damaged movers from the Enchanted Forest Game. I recommend printing it upside down with supports to the base plate only.
Step into an enchanted woodland with this adorable Mushroom Forest Sprite. Blending natural elements with whimsical character design, this charming creature features a large mushroom cap as its headpiece, delicate elf-like ears, and a…
## Enchanted Forest Spirit Collection - 5 Premium 3D Models 5 whimsical forest spirit figurines - mushroom creature, owl guardian, ancient treant, kitsune fox spirit, and crystal fairy lantern. Enchanting display pieces perfect for gifts.…
A softly enchanted mushroom bowl adorned with fluttering butterflies, shaped to hold tiny treasures, jewelry, fairy‑garden magic, or even a sprinkle of birdseed for your backyard visitors. The cap forms a smooth, rounded dish with gentle…
Emerging from twisted roots and burning with inner fury, the Infernal Living Tree captures the terrifying presence of a corrupted forest spirit. This dark fantasy sculpture features a gnarled tree trunk transformed into a monstrous face,…
Mysterious and powerful, this Ancient Forest Guardian represents the spirit of the deep wilderness. With massive branching antlers, a skeletal yet muscular form, and flowing natural robes that merge with the earth, this figure embodies…
Bring a touch of magic to your collection with this Enchanted Forest Bookshelf , a fantasy-inspired display sculpted from twisting tree roots and branches. The design forms a natural wooden bookshelf growing out of the forest floor,…
Step into the enchanted forest with this Forest Druid Mushroom Wizard , a mystical guardian of nature surrounded by woodland magic. Cloaked in leaves, vines, and forest growth, this wise druid carries a staff topped with a large mushroom…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Link to my Trolls & Monsters collection! ❤ https://www.printables.com/@Paja/collections/3327491 Thank you…
This model is designed to be printed without supports, saving you time and material. The special thing is also that it fits on a print bed of 180mm*180mm. Printing recommendations: Layer height: 0.2 mm Infill: 15-20% Material: PLA, PETG…
Here is a replica of the Bunny foot from 99 Nights In A Forest
Here is a replica of the Sundial from 99 Nights In A Forest
A replacement plate for the 2026 base model Forester center console to add a wireless charging pad. The design was made to fit this Wireless Charger Car Charging pad: https://amzn.to/4lQc45m I also used a USB power supply to power it…
Here is a replica of the wolf from 99 nights With help from the Wolf from 99 nights model by idk
Here is a collection of Forest Floor bases for your RPG minis. There is a base pack where you get the following sizes: 100mm 80mm 60mm 50mm 40mm 32mm 25mm There are also individual files for each size. I hope you enjoy them and find them…
Successfully printed in ABS and PLA without supports. Color Options Squirrel - 1 color/part Chipmunk - 2 color/parts Skunk - 2 color/parts Original Rhino model files available
Does fit both expansions and has space for more. Needs a spacer for this, i made one from foam.
This is just an example of using MeshLab on a model and still preserving the original shape. It doesn't work for everything and it has it's limits, but it's a cool tool. Models uploaded were reduce to 150K, 100K, and 75K faces Category:…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
DungeonStick forest setup. Fast prints without support. Round DungeonStick connection for maximum flexibility. Easy storage Mirror the designs to give you even more options. Three way couplers and end pieces included. Have fun building…
Forest Village high above the tree tops connected with bridges on hex bases.
