Counting matching models…
🇫🇷 Bienvenue à Paris! Welcome to Paris! The Eiffel Tower in Paris has become a timeless symbol of romanticism and " la vie en rose" . It is not only an icon of the city, but of all France and also our representative of Europe in the…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
San Francisco 49ers 1st Layer Black 2nd Red 3rd Gold 4th White 5th Black
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Frankenstein Bust. The back of the head is Meh. Did not pick up the UV displacement. Really no UV resolution towards the back so it was just flat.
Print approx. €19.62–€23.98 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (organic/tree support) Scale it as you like :)
Print approx. €25.42–€31.07 excl. taxPreliminary estimate for one variant
Ich habe es mit 0,1 mm Schichthöhe gedruckt, kann sicherlich auch mit mehr gedruckt werden. Wer einen Farbwechsel möchte, bei der 1,6 mm Schicht fängt das Logo an. I printed it with 0.1 mm layer height, can certainly be printed with more.…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
There are lots of different statues of St. Francis of Assisi, but this is one of my favorites because of the bird in his hand and the bird on his shoulder. :) See also Version 2 . I created this model by scanning a cement statue from my…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET
There are lots of different statues of St. Francis of Assisi, this one is my 2nd favorite. :) See also: Version 1 . I created this model by scanning a cement statue from my mom's yard. She's had it for decades, so I have no idea where it…
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for PETGSource material: PET
Until today, I missed the right extruder motor movement visualizer ;) Do dnes my chyběl ten správný ukazatel otáčení motoru extruderu ;) Print instructions No support, simple print... In this case PLA. Bez podpor, jednoduchý tisk. V mém…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Print at any layer height (0.15-0.3). Some overhangs are present in this design(mainly just the loop as shown in the photo below). In the gcode and 3mf file, supports are included. I'd recommend using the gcode, as tree supports are used…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
Coat of arms - France Znak - Francouzské království
Hollow Maps of European Countries Made with tracing the inside onto paper in mind. Size: 160mm X 160mm X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less. Countries so far: FRANCE, GERMANY, POLAND, ITALY.
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
This is a “folk art” version of St. Francis (San Francisco) from Mexico (the statue, not the Saint ;). It was scanned with Trnio for iOS, tweaked in Blender and sliced in PrusaSlicer. No rafts or supports needed! See also: Version 1…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for PETGSource material: PET
This is my new and improved version from San Francisco de Asis neckerchief or scarfring
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
Francisco Goya
Print approx. €9.25–€11.31 excl. taxPreliminary estimate for one variant
Ein Gehäuse für das recht große Pappgehäuse der Franzis CO2-Ampel / Luftqualitätsmesser https://www.franzis.de/maker/bausaetze/luftqualitaetsmesser-bausatz Für die Montage werden 6x M3 Schrauben (+ die vorhandene Schraube für die…
Print approx. €4.42–€5.40 excl. taxPreliminary estimate for one variant
Test your bedlever calibration printing this fantastic f1 track. Rotate, scale, change infill method first layer and test it. Have fun
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
TL;DR Strong, heavy 3D printed pen holder, no supports needed. Collection Office Tools Motivation Made some spiralized filigran pen holder objects to be printed without support. Liked to have a more massive one for my own table. It has to…
Print approx. €8.56–€10.46 excl. taxPreliminary estimate for one variant
Der Verschlussstopen dient dazu, die Bodenöffnung bei einem Frankia Platin so zu verschließen, dass eine Kabeldurchführung für ein 3 x 2,5 qmm - Kabel möglich ist. In der zweiten Version ist zeitgleich die Durchführung des…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
When visiting football matsches of Eintracht Frankfurt in the Waldstadion I never know where to put my cup. Luckily I use to sit directly behind a fence, so I could make this to an opportunity for me. So I designed this cup holder to have…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for PETGSource material: PET
Track outline with name and length.
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for one variant
L’histoire du Bleuet de France prend racine au cœur de la Grande Guerre, là où cette fleur sauvage, seule note de couleur dans la boue des tranchées, est devenue le symbole de la résilience et de l’espoir pour les « Poilus ».
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
FRANCHOCHAMPS SPA CIRCUIT, IN BELGIUM. MODEL WITH VOLUMETRY
Stangenhalter für Heckgarage die Heckgarage eines Frankia Platin. Das rechte Bauteil hängt schraubenfrei an der Verkleidung des Heizungskonvektors, das linke ist in meinem Fall an einen selbstgebauten Regal aufgehängt. Alternativ kann…
Print approx. €4.96–€6.07 excl. taxPreliminary estimate for one variant
Frankfurt (Germany)- coat of arms 3d model multi-colour for single filament printers. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner locating pins are NOT printed.…
Print approx. €2.41–€2.95 excl. taxPreliminary estimate for one variant
Frankfurt silver inscription phylactery and Unrolled tomography text. The Frankfurt Silver Inscription is a remarkable archaeological find that has provided the oldest evidence of Christianity north of the Alps. Unearthed in a grave in…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
upd: new print profile (0.15mm) increases the print time but greatly improves reliability. It all started with the paracord keychain I had before I've got my hands on a 3d-printer. For the first several weeks after getting one I've been…
🇫🇷 Bienvenue à Paris! Welcome to Paris! MiniWorld3D's most popular model is now on Printables! Our Notre-Dame de Paris Cathedral has been printed by makers all around the world and made MiniWorld3D very known in the 3D printing community.…
🇫🇷 Bienvenue à Paris! Welcome to Paris! The City of Lights' second landmark has arrived to MiniWorld3D's Wanderlust Collection on Printables, and it is also one of our most popular models, it has been downloaded and printed countless…
"Igor, throw the switch!" "Yes, master." Instructions Check out the 2022 updated version posted here: https://www.printables.com/model/161850-frankenstein-lightswitch-plate-2022-version Update: It's coming up on Halloween so I figured…
DNA double helix with a X-ray diffraction-inspired base in honor of Rosalind Franklin. Remixed from DNA helix by linew (https://www.thingiverse.com/thing:3980700). Rosalind Franklin's research as a chemist and X-ray crystallographer was…
Igor, throw the switch! Yes, Master. ---------- I originally designed this seven years ago, and figured it's high time I made some long needed cosmetic updates: The blade portion is now symmetrical in both the ON and OFF positions, the…
This Frankenstein head incorporates fascinating features: 3D printed, the hair part doesn't need supports, and the head was printed upside down with custom supports at key edges. An easy-access cap allows you to customize the internal…
Frank is a good-natured giant who helps out at the mortuary by day and spins tunes at the Club by night. He doesn't get a lot of sleep, and it shows.
A set of 3 Halloween bookmarks featuring a ghost, Frankenstein, and a pumpkin jack o lantern. They’re quick to print, thin enough to slip into any book, and perfect as little seasonal gifts or party favors. Print them in festive colors…
I sculpted/modeled this Weiner Dog figurine in the likeness of my own dog (Frank). He's the best dog in the whole world, so I figured I'd put it online for everyone to enjoy! If you print him too small you could have issues with the…
Originally designed by Frank Lloyd Wright for the Ennis house built in Los Angeles, 1924. This house was one of a handful of “textile block” projects created by Wright, a system of interlocking concrete blocks with bold patterns that…
his is my model spiral Francis turbine. Turbine has 8 blades. More info about turbine runner is in file: "Turbine runner.txt". Turbine runner modely by Esmir Hozanovic. If here somethik problem, download model here:…
Was looking for a good representation of St. Francis of Assisi and everywhere I looked I came up short. The main model is from a 3d scan of a bronze figure of St Francis of Assisi carved for the high altar of the Santo in Padua, made by…
Circuit de Spa Francorchamps, Stavelot, Belgium, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
For a commercial license, please visit our website to become a Mythic Merchant: https://arsmoriendi3d.com/mythic-merchant/ Fits 12oz, 330ml or 375ml cans. Comes in multiple versions, with and without a handle and with and without a…
Join here to get access: https://www.patreon.com/kogi3d I went full Halloween mode with my new Articulated Frankenstein Hand! This creepy hand features a chunky Frankenstein-inspired design with stitched details, scars, fingernails, and…
A Logo Stand from Sanfrancisco 49ers
Here is the model for Franky Bear. Franky is a good but Spooky Friend of Barry, and like his friend he seems to just want to be your friend too, do you have space for Franky? maybe he can keep Barry Company. I hope you enjoy, and Happy…
Figurine of a grumpy mini Frankenstein. https://youtu.be/svMf4KwcbEI Printing Can be printed in both FDM and resin Supports are NOT required when printing upside down with good cooling Minimal infill required All Sculptember Models Ghost…
This is a faithful reproduction of the Circuit de Spa-Francorchamps. Its dimensions are 20cm long, 12cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model, it…
Dive into the architectural elegance of Frankfurt am Main with this 3D model, showcasing the city's iconic skyline! Model created using OSM as well as manually reconstructing several buildings. The Model is completely square. I printed it…
Franken-Stein Can Coozie with flip top. Recommend at least 3 walls to make sure the top pegs can snap into the handle without breaking. If your printer can't do large bridges then a little support on the underside of the top part of the…
“A Wink from Heaven” This figurine is a light-hearted yet heartfelt tribute to Pope Francis — captured with a warm smile, a gentle wink, and the familiar gesture of blessing. It reflects how many will remember him: close to the people,…
Model of Francis Turbine, diameter 180mm. you need 2 bearing 6000 (10x26x8) and 4 bolts M3x8 DIN 912 Category: Engineering
Adapter for 1L/34oz Frank Green water bottles designed for car drink holders
No need for more screws or PTFE tube adapters needed.
The King Frank legendary skin in brawl stars. Just one of these is worth 300 USD
Halloween Special Transformable Frankenstein to Coffin This is not my creation, but i found this model from Toymakr3d and it is so cool that i don't want to conceal it. If you like it --> press like it :-) Here the original description:…
Frank the little robo truck is part of the LITTLE ROBO family . The LITTLE ROBOs are different, small robots mixed with vehicles of all kinds. From construction machines to boats to aircraft and everything in between. The special feature…
Frankenstein - Halloween Mask
Original mesh by Matheus Rudo: Fallingwater House - Frank Lloyd Wright - Download Free 3D model by Matheus Rudo (@Matheus.Rudo) [6f2f682] (sketchfab.com) Fallingwater by legendary architect Frank Lloyd Wright is commonly regarded as his…
🇺🇸 Welcome to San Francisco! This model was created by MiniWorld3D member Trevor DePodesta (@coold3d4me ) www.cool3d4me.com The Transamerica Pyramid in San Francisco, California, is a 48-story futurist building and the second-tallest…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Print standing with support Improved my previous oculus quest 2 headstrap adapter: https://www.printables.com/model/578398-frankenquest-htc-vive-das-adapters-for-oculus-ques Some were already prefering it for quest 3, but now you have…
Bulldog stilizzato silhouette wall decoration. Sono presenti 2 file, uno intero, mentre l'altro è sezionato e ingrandito del 170%
I didn't like how long RTM's keychain took to print, so I got rid of about half of the links to make it shorter! It's still a neat design that works great as a keychain. I printed mine with a raft to make sure all the little pieces don't…
Updated! V2 uploaded with a change in the lock to ease the lace installation! You can easily modify the dimensions directly in your slicer!! Any special parameters, supports, raft or so on are needed :) If you need any other modification,…
This is a remixed longer chain, tested and working. I'm willing to trade a little time post-processing in return for certainty of print success, so I use a brim for my long chain prints. After removing the brim, I like to sand and wash…
****Find all of my exclusive content on my Thangs.com profile **** This chunky Frankenstein's Monster kit is roughly 6.5 inches (17cm) tall once assembled. Shop the filament we used in this model on our Amazon Storefront As with all of…
Made with files from Printables and Thingiverse. Adjustment made to bolts and headband using TinkerCAD. Locking sleeve made in TinkerCAD.
Circuit de la Sarthe, Le Mans, France, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Sadly the right ear needs support material, but the rest kinda works :) I did a cut in a 110 degree angle, so the ears need to be rotated by 110 degrees and the face by 110, IIRC. It needs rescaling. This is printed to fit a tiny plushy…
This is a remix of the one made by Sekazi. Its been modified to fit the quest 3. Ensure you print it standing up (default orientation of the model) with supports otherwise the clips will break. It is a bit of a squeeze to get it in place…
Midway Gardens (1914-1929) was a concert venue in Chicago, Illinois designed by Frank Lloyd Wright. This sculpture was a collaboration between Wright and Italian-American sculptor Alfonso Ianelli. This is one of several different…
Voici une clef capable d'ouvrir les poubelles jaunes en France pour ne pas etre obligé de passer par la petite ouverture. Print Settings Printer: Wanhao D12 300 dual Rafts: Yes Supports: No Resolution: 0.2mm Infill: 100% Filament: Wanhao…
Modifiquei este arquivo IGS para OBJ e STL para impressão. Ainda não o imprimi, mas deixo aqui disponível a quem interessar.
Designed by Frank Lloyd Wright for the Samuel Freeman house built in Los Angeles, 1923. This house was one of a handful of “textile block” projects created by Wright, a system of interlocking concrete blocks with bold patterns that added…
porta completo porta hot dog de buldog francés imprimir con soportes bajo las mejillas del perro
english version below deutsch Ein Stück Frankfurt - Bahnhofsviertel / Innenstadt / Westend - Skyline Cityview Ich habe mir ein Stück Frankfurt im Rahmen gebastelt. Der Druck stellt ca. 1 Quadratkilometer Frankfurt dar, inkl, markanter…
This model uses a few compartments from the dummy 13 model. Supports: hands - no head - yes - please use the tree type torso - yes - doesn't matter which kind arms/legs - no feet - no PLEASE USE PETG. you dont have to but it is…
This is a pair of "Neck Bolts" for a Frankenstein('s Monster) costume. Instructions Print in a silver or grey color, or paint the "bolt portion" to look realistic, if desired. I advise against painting the disc portion at all, especially…
Here is the awesome looking San Francisco 49ers Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
falling water
Eintracht Frankfurt Keychain The keychain was designed by me as a gift for my best friend. :-) We are both Eintracht Frankfurt fans! Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2X Rafts: Doesn't Matter Supports:…
This case plunger design will allow the plunger to retract into the case column with a case in the plunge and not damage the case. NOTE: Currently only available for 9mm. However, I plan on offering plungers for other calibers as requests…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Check out my Amazon Page to see what kind of gear I use to make these models! This is the Wiggle Chair, from Frank Gehry's Easy Edges furniture collection. This was modeled from reference photos, and doesn't require support when printed.…
Frankenstein's Monster neck bolts for Halloween costume. Bolts and neck band printed separately and connected with M2x8mm screws. Band simply sits around back of neck
In honor of the Tour de France, here is a mini cyclist toy. It is based on user's "DanBot" design ( www.thingiverse.com/thing:279143 ). I have just carefully spliced it two and lay it flat so it can be printed. I've added a folding tab on…
Clea's Hair needs to be sculpted from air dry clay, foam clay, or thermoplastic beads. I do not have the artistic skills to do this in Fusion360. “Clea and Francois are best friends, she would never leave him.” - Esquie The better rock!
Pope Francis Pope Francis was head of the Catholic Church and sovereign of the Vatican City State from 2013 until his death in 2025. He was the first Jesuit pope, the first from the Americas and from the Southern Hemisphere, and the first…
The first creature to be featured in The uppalong Halloween Hullabaloo is the The Modern Prometheus aka Frankenstein’s Monster. The Jack Pierce/Karloff version is one of my absolute favorite character designs of all time so this has…
Pretty much summed it all up in the first part. To install, place the underside clip in first with a slight angle or the right side upwards ready to feed that in. I've added screenshots to show the difference.
This is a simple wrench I have created to assist in opening and closing the Frankford Arsenal Tumbler. It utilizes 2x m5x50mm bolts to fasten the handle to the wrench. There are two different handles for your choosing: Slim Handle - if…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Francis turbine created with Autodesk Inventor Category: Engineering
This undead head has a flat top so it can be used as a table or shelf. He won't complain. Supports Required. Can also be stacked or used as a table. Tree Supports on build plate only Powered by image-to-3D from MakerWorld…
A peaceful 3D tribute to Pope Francis. Whether you're into spiritual figures, unique colectibles, or just want some calm energy on your print shelf, this model’s a gentle vibe. Easy to print and made with respect!
San Francisco 49ers Coaster
