Counting matching models…
Update 2025-03-04: Version 2 der Box S2 hinzugefügt mit Deckel und Trennwand. Außerdem Skadis- und Wandbefestigung für Größe S2 hinzugefügt. Text überarbeitet. Version 2 of the S2 box added with lid and divider. Also added Skadis and wall…
Remixed model of Hammerhead for AAP01 to fit tracer Unit Changes: - Slightly bigger - Space for tracer unit (Acetech Brighter C or any below 28mm diameter) - 14 CCW inside for tracer - Removed bottom rail (added version with this rail) -…
Print with no supports, pull out the stock barrel and throw this one in. Don't have a printer? Order from OOD! Affiliate link !
To install, start by butterflying the shell. Remove the original frontend. Drop in the new frontend and then button up the shell. For printing, I like to print with the front on the build plate, with some supports for the larger…
Lens Mod Instructions
Modeled and printed a fully articulating frontend loader becasue….well, becasue I could as I explained to my wife! I'll be modeling various construction equipment in HO scale for a railroad in the near future, so I thought I'd start here,…
For use with any other collet in the ecosystem (Xshot Longshot, Unicorn) Printable with no support, if the overhang is giving some problems, you can use some. This is functional with the stock barrel. The stock barrel measures (incase you…
So, here's another frontend for the XShot Motorized Piston Pump. Took me about 13 attempts, but the geometry of the frontend should very closely match the front end of the body. The main differences come down to me not really like the…
Modified barrel assembly and muzzle for the Breacher by Sillybutts. There is usable M-LOK on both sides. Print and assembly are just like the original parts. The muzzle also works with the original barrels and the M-LOK barrel works with…
A drop in replacement frontend for the Nerf Pro Torrent. This does not require any hardware, but does need a frontend piece and a collet. The barrel needs to be pushed in pretty hard to seat in the stock dart gate. Low profile Collet can…
An Updated version of this: Link , that now is able to be printed with no supports. This will work with the stock barrel, but will not have much of the barrel showing out the front of the blaster. There are two versions of the frontend…
This mod requires the blaster to be opened, and replaces the stock collet that comes on the blaster. It does re-use the breach from the stock blaster - which is pressed into the “Replacement Internal Mate” as seen below. The collet can go…
This is a frontend, and will need to be printed with some supports. Orient it so that the 45° marks on the picatinny are so that the picatinny will not need supports. Use supports on the build plate only, and I like to use snug. This has…
Replacement hubcap for Opel Frontera. Printed in PETG with a 0.6mm nozzle and 0.44 layer height to cut down print time.
Fits this housing: https://www.printables.com/model/1453676-dji-o4-o3-lens-mod-housing Still fits the O3 camera. Thanks to LorenzFPV for the alternate versions!
Circuito Permanente de Jerez, Jerez de la Frontera, Spain, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate…
This is a fully parametric reproduction of the original Kayoumini frontend by Kayou Frames in Autodesk Fusion. You can easily tweak it for any camera by changing the user parameters here: Here are the available parameters A quick rundown:…
To install, unscrew the two screws that are in the pins - Remove the pins - Then pull the stock front end out. Then put the new one in, then put the pins in. Print it flat, like the others. No supports needed
Updates 2026-06-10 Add a larger version of battery door (as shown in the 3rd pic) Key Features Expanded Battery Bay: Fits larger batteries, specifically optimized for the Tattu 650mAh 3S LiPo (16mm x 29mm x 56mm) and similarly sized…
Fitting 5.25 speakers to my Frontera but the mounting holes don't line up so I knocked this up for an adapter. Printed mine in PETG should be fine hidden down in the door temp wise. Printed with 5 walls, top and bottom with 25% infill and…
Introduction: I wanted to have the Spinshot become a backup shotgun of sorts, so I decided to make this. I would NOT recommend yanking the front up, as the shell would just eject itself. Not saying you CAN'T. You will need to remove the…
Sichtlagerkasten, Tiefe 220 mm, Höhe 120 mm, Breite 100, 120, 140, 160, 180, 200 & 220 mm. Kisten sind nicht stapelbar, sie haben keine Lasche zum aufhängen. Sind nur gedacht zum einstellen in ein Regal oder zum abstellen. ………………………..…
Frontend to go alongside my Betafpv CO3 Lens Mod for the DJI O4 “lite” that can be found here: https://www.printables.com/model/1380946-dji-o4-lens-mod-betafpv-co3-lens-my-best-to-date I've only exported the 25deg STL that I use, but I'm…
This is a fairly simple remix. I wanted to put a Shellington Underbarrel Masterkey on my Xshot Motorized Piston Pump. The Masterkey needs a long segment of picatinny rail to mount to, and it pumps forward to prime so I wanted a shroud…
PLEASE USE THE UPDATED FILE THAT CAN BE FOUND HERE: LINK To use this, Remove the stock frontend, and place in the printed frontend. The collet will grip the barrel and cause it to move less around the priming block, as the stock frontend…
Custom grip, requires 1 toy screw to retain the grip to the front grip keeper
i have designed a front bracket which has fasteners to screw it to the base plate, making the print stiffer and more accurate. it has M10 thread to screw in the threaded rods Print Settings Printer: Geeetech I3 Pro B Rafts: No Supports:…
You can use the flywoo o3 lite nd filters with your o3 lens mod (dji o4 lite). For 12mm standoffs / 25 degrees of tilt
Remixed from @Krhom's frontend to change the tilt to 20°
Want to put a PCAR on your Deuce Pro but still do it in style? These Deuce Pro frontends are designed to hit sub 130FPS while having a scar to maintain accuracy. These frontends will still allow you to put the blaster in the provided…
A shortened frontend for the Talon Fang Mk2. Made the priming handle on the side to reduce weight and size. An optional lower magwell is included to make it look like the normal talon claw magwell. Hardware- 1 top front threaded rod of 6…
This requires the removal of the stock orange ring around the tip. Mine was not glued in, and fell off before I designed these. Both use an M3 bolt to stay on and slide over the standard front end of the blaster (purple or brown). The…
It replaces the front barrel piece of your nerf stryfe to allow for M-LOK rail attachments. No supports needed :)
Extended the RedCowl collet frontend by 1.25" (31.75mm) to give more length to the Fury X.
We didn't want to mount the WERA screwdriver rack to a wall, so we looked for alternatives. An open frontend storage bin is a nice way to hold the screwdrivers and some parts while still being mobile. Print Settings Rafts: No Supports: No…
Is your outlaw too short? You feel like you have a Big Iron, but it's not big enough? With this frontend, you now have Biggest Iron. This will fit diagonally on a 220x220 printbed, but it may be able to be printed standing up.
Case for device which forms TTL-compatible square output for the frequency counter input from weak signals. Assembly notes: BNC-J connectors 3mm led 5.5x2.1mm DC power connector
Instead of the standard brass barrel frontend, it replaces the old frontend with a brand new 16mm barrel frontend.
Un portachiavi stampato in 3D ispirato all’Akatsuki è un piccolo accessorio decorativo che richiama l’estetica iconica dell’organizzazione di Naruto . Solitamente presenta la caratteristica nuvola rossa su sfondo nero, con dettagli in…
Blue-fronted Amazon is a realistic 3d bird model (stl/3d printable) of a real animal you can print for display, education, and collecting. Use it for tabletop decoration, nature-themed dioramas, study reference, or a gift for bird lovers…
Erstes Testmodell “Schnöpfrahmen” für Opel Frontera
A simple protective cap for the front driveshaft spline connection, designed for 3D printing using TPU. I printed my own version using TPU 75A. I encountered a problem: the original plastic dust cap on the front driveshaft of my Opel…
Fits this housing: https://www.printables.com/model/1453676-dji-o4-o3-lens-mod-housing Still fits the O3 camera. Thanks to LorenzFPV for the alternate versions!
You can use the flywoo o3 lite nd filters with your o3 lens mod (dji o4 lite). For 12mm standoffs / 25 degrees of tilt
Un portachiavi stampato in 3D ispirato all’Akatsuki è un piccolo accessorio decorativo che richiama l’estetica iconica dell’organizzazione di Naruto . Solitamente presenta la caratteristica nuvola rossa su sfondo nero, con dettagli in…
3D printable topographic miniature of Jerez de la Frontera - 🇪🇸 Spain Capture the beauty of Jerez de la Frontera 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates…
