Counting matching models…
(if you have printed this earlier, as of 12/27/22 there is an entire new version out!) Mini-IFU (v2) Print There are 2 versions of the “Connector_Bottom” you can print (you only need one!). _v2 requires the additional…
Cable holder for the Kinetic profile (10mm T-Nut) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Video Games
Chassis kit to fix the shortcomings of the long flat skid on the FX118. This has a 10-degree skid and shortened the frame's bottom rail (battery relocated to slider). I ended up with an ESC above the transmission and the rx on the slider…
thumb grip for Fuji GFX100RF all buttons and dials are still accessible Printed with Spidermaker Coal Black Matte PLA (supports separate very cleanly and easily) 100% infill .4 nozzle .1 layer height Supports everywhere Prints best with…
Created originaly by Christian Lerche Sørensen
This adapter make it easy to swap the TC or the other filter adapter I made. Know that there is a big vignetting on the first 2 steps of the digital in camera TC. So this gives us 75mm equip @ 33mp and 95mm @ 20mp. You can also manually…
Thumbgrip for Fuji GFX100RF that allows access to the aspect ratio dial. This prints best with the grip side down. Printed in Overture PLA with .4 nozzle .1 layer height 100 % infill Supports on build plate
The footprint of this model is 2x2.5, so it essentially occupies 2x3 gridfinity units. The main compartment holds the Nitecore FX1 charger for Fujifilm NP-W126S batteries. I modified mine to take usb-c from the side, so there is a cutout…
Made this for my active harness. Everything is straight and simple so it keeps the harness centered. It's not the prettiest thing in the world, but it does it's job perfectly. No drilling template… best guideline I have is: Bolt on the…
Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.1 Number of perimeters ... 2 Infill ...................................... 15% Supports ............................. yes, the inner…
Recommended to print with support & brim, for best results, use variable layer height and set Quality/Speed to 0. Fill 20%. Use a small precision knife to remove support from the pin holes.
ENGLISH Guide for this tool : https://s.click.aliexpress.com/e/_AMXawm Use it with a 9mm wrench to perfectly align the reducing sleeves in the Kinetics K50 profiles Print at 30% 0,2 https://lebois-racing.com/srt100-actuators Which PLA to…
A simple protective cover for the Mackie ProFX10v3 Plus mixer. Designed for the Prusa XL , as the model is quite large (about 306 × 276 mm ) and requires a big print bed. The top includes an embossed “ProFXv3+” text, which looks great in…
Little clip for the GFX100RF that prevents the power switch from turning while the camera is in a bag. .SCAD file is included.
Quick and easy to print cold shoe adapter so you can mount accessories to the FX1/Z1U. Mounts using a 1/4-20 .5" countersunk screw. Printed in black pla with supports. You may be able to get away without using any supports.
Quick and easy to print cold shoe adapter so you can mount accessories to the FX1/Z1U. Mounts using a 1/4-20 .5" countersunk screw. Printed in black pla with supports. You may be able to get away without using any supports.
Storage for: https://www.printables.com/de/model/70219-bottle-cap/comments I've printed my caps at 95% so, if you printed them at 100%, you may scale this part bigger.
