Counting matching models…
Requires:Original G305 PCB, Scroll, Side Buttons and Screws. Requires 4* 5mm Diameter 3mm Depth magnets. Requires 4* 5mm Diameter 3mm Depth magnets. (may need glue) rotate top -55 degrees, rotate Rear 90 degrees. If you enjoy this mouse…
FINALLY FINISHED I've tested the final version of this mouse for a couple months now and I'm convinced it is pretty much as good as it will get. Enjoy! Background Story This Model was initially made for school and then continued in my…
Full instruction writeup on instructables: https://www.instructables.com/Razer-Viper-Mini-Wireless-Mod-G305/ It will likely ask you if the baseplate file should be separated, it should not be. I can no longer combine the bodies in Fusion…
LogitechG305 Mod compilation. You will find everything you need to fully modify your G305 and tinker with it to your hearts content… or maybe just create your own mods :D Update 2022.7.6 : Added more mods including an insane 20-30gr mod…
-58g with holes / 63g without holes. Weight will vary based on battery and print material. -Wireless using G305 Internals -Rechargable AAA via magnetic microusb tip -Designed for FDM printing -No soldering required FREE THINGIVERSE TEST…
Remixed from: https://www.thingiverse.com/thing:4600978 https://www.thingiverse.com/thing:3823244 https://www.thingiverse.com/thing:3969266 I used the tinfoil and lithium battery for a big while and I was looking into making a battery…
For best results I recommend Resin printing. I included an example model of how I Resin printed this on a Anycubic Photon Mono X using Anycubic standard Black Resin. 2 Layers of dark gray spray-paint (I ran out of black spray-paint). 2…
I have had success FDM printing this model. Mods I did to the Logitech g305: Replaced the AA battery with a AAA battery and spring. SLA printed back cover Weight 79g total with the SLA print coming in at 3g compared to the stock 7g back…
Just a Remix of the Logitech G305 battery cover with Logitech Logo
Alternative mouse shell for G305 - Semi Ergo Shape - GPRO Feet compatible - LiPo replacement. Best filament with most accurate results is Extrudr XPETG so far. It does not warp like PLA or regular PETG and has good sanding properties.…
Meet the sub-40g Z(H)ero Mouse, inspired by Optimums Zero Mouse. Parts required: -Logitech G305 Lightspeed https://amzn.to/3EqIv8R -Lightweight Lithium Battery https://amzn.to/4hvylmi No additional screws/hardware required! I designed…
Used filament as a pin for hinge and latch. The mouse fits comfortably without moving around and without the side buttons been pushed while inside.
So we've got the ZS-VML here. A 3d printable mouse designed for FDM printing. It's a symmetric mouse that's based off of the Razer Viper Mini. It's got a lower hump, higher front, and slightly wider sides. You can find this mouse and more…
This is a G305 Internals Shell shaped like a mix between Sensei Ten and Endgame XM1. You need 6 6x3mm magnets and quite a few M2 Screws in different lengths - you can buy a set on Amazon and you will be fine (Button/Socket/Flat doesn't…
Turn your Logitech G305 into the best ergo mouse in history! (which is G703/G603 imo) I made this because the G305 is still the cheapest good wireless gaming mouse in my country. HUGE credit to Rollinsloth's RS4 design;…
First two pictures are the “Big Daddy”. Second two pictures are the “Slim Boi”. The Big Daddy holds the G305 and three AAA batteries. The Slim Boi just holds the mouse. Print settings I used in the pictures are 0.3mm layer height, really…
This is a remix of the VIPRO v1 Mouse G305 Shell that changes the battery to a USB charging AAA battery. Additionally the design was modified to allow it to work with later G305 PCB revisions that have a few larger components that…
Wanted a lighter, more ergonomic base for the G305. I wish I could transition away from Google Sketchup so I could make the polycount higher and make it more polished, but this model took me about 45 hours of work and it pissed me off…
There is no soldering needed. I designed it to work with a triple A battery in lieu of having to solder a bit and using a different one. You will need to cut a few things. Specifics can be found in the google doc which details all…
ATTENTION!!! Don't forget to add a pause in the Slicer at the exact layer height to put the magnets in place. Make sure to put magnets in correct orientation!!! Model uses 3x6 mm diammeter neodimium magnets.
guide: https://medium.com/@zoroseerus/zs-a1-3d-printed-symmetric-wireless-mouse-guide-607e6e8e19aa -Mass will vary based on battery and print material. -Wireless using G305 Internals -Rechargeable AAA via magnetic microusb tip or 675 coin…
This is a proof of concept of a low budget lightweight mouse mod based on the logitech G305 wireless mouse. If you buy a standard logitech G305 this model uses all internals and screws that you will find when taking that mouse apart.…
The plastic part of scroll wheel has worn out and became loose, which caused the scroll wheel to not to rotate freely. I designed this model to replace the plastic part. After disassembling the mouse, you need to remove the plastic…
Edit 22/08/2026 Found and uploaded the, 'flat', version of the battery cage. Thanks to @Galaxy_5255671 for giving me motivation to look for it! Edit 15/2/2026 Added Back V2.1, with a bigger 7mm rear skate land and a much improved side…
You've probably seen the A1 Mini mystery kits for a printed mouse. I think it's pretty neat that Bambu Lab is including those as there are plenty of others to try as well, like this one. It's an asymmetric shape I made that has design…
Logitech G305 conversion to G9x geometry. Printed on Elegoo Saturn MSLA using Sirayatech Fast Smoky Black and 10mL of Blu to increase durability. Print should work fine for FDM but will require a lot of support, PETG recommended as a…
This would'nt be possible without Mouse Shape Tester Megapack , so thanks Scout339 :) I have a small desk and too many mouses, this was a way a find to keep thigs less chaotic
I really like this mouse but after a while in the tropical climate here in Taiwan the rubber degraded so much it started breaking down into a sticky mess. While replacing the microswitches I thought why not fix this as well. You may…
Hit my DMs if you want SLDPRT 2023 file to modify…
In order to make the G305 as light as possible you gotta use the lightest battery you can. Does require removal of stock battery tray which includes the dpi button, but dpi can be changed through the mouse software, plus that's just more…
GUIDE https://www.instructables.com/Z100s-3D-Printed-Symmetric-Wireless-Mouse-Guide/ VIDEO GUIDE: https://youtu.be/o0P37Avcor0 -60g with AAA. Mass will vary based on battery and print material. -Wireless using G305 Internals -Rechargeable…
Relleno : 20% Calidad : 0.2 mm sin soportes
If your G305/G304 scroll wheel is rubbing against the shells, the rubber part of the scroll wheel is degraded, you can open up your mouse cut the rubber out and replace it with TPU printed ‘skin’ for your mouse wheel. you can print this…
This is a remix from this model on Thingiverse: https://www.thingiverse.com/thing:3862387/files My remix has a flat bottom, so it's better printable on an fdm printer.
Lite model using G305 parts for test. Pro version as product will be available. https://x.com/RollingSloth/status/1577960567561629697?s=20
Mouse case consists of two parts - base and cover . Magnets are used in this model 5mm diameter 5mm height 4pcs for cover 5mm diameter 2mm height 4pcs for base (pause necessary to insetr magnets) CHECK POLARITY BEFORE PUTING MAGNETS IN…
This is a remix of a model on Thingiverse that makes a lighter base for the G305 to GPRO mods
I took the liberty of remixing this excellent mod to better suit my preference for side buttons. To balance the weight, I also added two LR44 batteries.
I had to service my Logitech G305 mouse, and the original skates were very worn, so I designed them. I printed them in ABS. I'm also uploading the Fusion 360 file in case it requires modifications (although it fits perfectly in my case).…
The Fusion file was corrupted. The STEP I recovered to export should open but it's scuffed. Sorry. There is no soldering needed. I designed it to work with a triple A battery in lieu of having to solder a bit and using a different one.…
Looking for an ergonomic mouse mod for your Logitech G304 or G305? Here an interesting twist, the "Bubble Butt". It features a thumb rest with a resting edge for the pinky that wraps around the mouse. I modified the original model by…
Lil' housing for when your G305 USB receiver gets damaged. Will add a cap later (or not, depends if I have a use for it). Print at lowest layer height you're comfortable with, I used .1mm with a .4mm nozzle and it worked. Lower temp and…
I've had the misfortune of losing the power slider switch while performing maintenance on my Logitech G305 mouse (you know how it falls into a black hole when it's dropped...). That said, I've designed a replacement and am uploading it…
at the moment this design just barely works, but i do intend to upgrade and make it much easier to print and assemble. ASSEMBILY: dissassemble g305 hot glue mouse clicks into holes on pcb (look in photos for reference) screw pcb board…
Placed some holes for two 23 mm x 2 mm magnets, would put support for the holes
Just stick it with double side tape to your keyboard
-Mass will vary based on battery and print material. -Wireless using G305 Internals -Designed for FDM printing -No soldering required -Battery options- rechargeable cables with magnetic tip: https://amzn.to/3MTndCk rechargeable aaa. there…
i wanted to mount it on a skadis
This is a lightweight modification for the Logitech g305. The model was originally made by Willbot750 and then modified by Valency, who added side-buttons. All that is needed are the original screws, switches and the PCB of the g305 to…
An accurate model of the g305's PCB and all important screws laid out. Use it to start and check your own modified shell for the g305. Notice: You will have to check the space needed between the PCB and your own model. This is purely to…
Edit 15/2/2026 Added Back V2.1, with a bigger 7mm rear skate land and a much improved side button(s) holder Added a V2 for the front. USE 1 WALL THICK TREE SUPPORTS Added a scroll wheel support with larger screw holes. Forcing screws into…
Just stick it with double side tape to your keyboard
Looking for an ergonomic mouse mod for your Logitech G304 or G305? Here an interesting twist, the "Bubble Butt". It features a thumb rest with a resting edge for the pinky that wraps around the mouse. I modified the original model by…
