Counting matching models…
High Gardens purpose is to grow more plants on your living (empty) space. A garden tower balance itself with the vases spread around to distribute the weight. Designed for plants that enjoy a define wet and dry cycle. Also easy to water,…
This is another in the Roman Villa Garden Series. If you like this, then check out my other models. This was inspired by the painting also included below. Does not require supports (even if your slicer warns you) 0.2 layer with 20%…
For all the indoor gardeners! I was tired of my very small window sills that were not wide enough to hold plants for good sunlight. I didn't want to permanently add a larger window sill with glue or screws, so I designed a clamp that…
Midway Gardens (1914-1929) was a concert venue in Chicago, Illinois designed by Frank Lloyd Wright. This sculpture was a collaboration between Wright and Italian-American sculptor Alfonso Ianelli. This is one of several different…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
The Bill I present you with The Bill, The Hydroponic plant supporter. I made this for my wife's Gardyn Hydroponic Garden, it will also work in other brands too. Some of the smaller leggy plants needed extra support at the base. The Bill…
Reduce algae growth when you use your seeds with the seedless pods by blocking light around the pod. Needs to be printed with TPU. TPU is soft and flexible which is gentile on plant stems and allows for plant growth to any size. No need…
I created this modified version of the net pot for Rise Gardens indoor hydroponic garden system. This pot allows the use of different fillers like coconut coir or other fillers that would fall through the original net pots. The original…
Bring your tabletop to life with this complete modular terrain bundle of fences and gardens, designed for wargaming, RPGs, and miniature battles. This set includes: 11 unique fence pieces – straight sections, corners, curved pieces,…
These improved stands taper down towards the top to allow more room for the leaves to the plant compared to the stands from Rise. There is also a center strut which provides a central point for clipping the ties. The stands slide under…
Silence your Rise Garden! This sound reduction kit significantly minimizes the water flow sounds. After installing, the sounds from the flowing and draining water will be so quiet you'll barely notice them. The quiet hum of the electric…
Correctly oriented, scaled and reinforced.
! NEW more durable design with improved compatibility with different grow media! Save money and use your own growing media instead of using the Seedless Pods from Rise Gardens. These screen inserts press fit into your existing Rise…
Grow large plants on the top shelf of your Gen 2 Rise Garden with these shelf risers. Add 152mm (6in) of grow height to the middle and/or top shelf of your garden giving them the same height as the taller bottom shelf. If you only have a…
3 piece set. Garden stake can be used with or without extension. For Blink Outdoor (3rd Gen) camera.
Easy to remove, these covers have a small lip to aid in removal. The original hole covers for Rise Hydroponic Gardens are difficult to remove because they sit flush making it difficult to get your finger under them. Compatibility: All…
A small cap to use in place of the large reservoir
I made a high tower against the wall and the weight made it tilt a bit. Made this clip to give it some stability. No supports required.
Rise Garden The first generation family size Rise Garden is a pretty solid all-in-one hydroponic system. In a short time a novice can have great results growing food. That said, there are some challenges with a hydroponic system. One of…
Maximize your growing space with your Rise Garden. Each Rise Garden tray can reasonably fit 4 mature plants. This tray lid is designed to have good spacing for 4 mature plants while having slots for 4 starts. When you are ready to remove…
The original one was too low for me so the remixed version has 59mm
My high gardens plate sometimes could not hold enough water, especially when they got big/high. Therefore I increased the height of the perimeter by 15 mm and moved the mount up to account for it. While doing that I took the liberty to…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
This print is a cover for the ends of the Rise Gardens nursery pods. The pods are essential for starting seeds for use in the gardens. However, the fatal flaw of the nursery pods is that the ends are completely exposed. The exposure to…
I was looking for an insert for this game, but I couldn't find one, so I decided to make one myself. It's my first creation. I don't have the expansions pack for Wild Gardens, but my insert has the space available for all 3 of them. The…
Rise Garden The first generation family size Rise Garden is a pretty solid all-in-one hydroponic system. In a short time a novice can have great results growing food. That said, there are some challenges with a hydroponic system. One of…
Its a Zen garden with 3 spots the 1st one is quite authentic with its decorations the 2nd one is ayin and yang inspired design the 3rd one has a auto raking feature. it also comes with a modular arm that you can use for raking the sand it…
Duża, niska doniczka na kwiaty typu skalniak, np. Rojnik. Można wydrukować wraz ze spodkiem lub bez.
A very quick and easy print to substantially slow or stop (depending on light hitting the water level window) algae growth inside the tank. The large goes to the left at the filling panel gap, the small goes to the right. Print Settings…
I designed these additions for the game Four Gardens. The mini pagodas are a remix of JugglingMike but changed to be more thematic and intricate. The disks go on top of each section of the pagoda to protect the box lid from being…
The printer will want supports, say no, it works anyway. Transparent PETG will work very well and other half translucent cheap PLAs, ABS too. For the base chose any colour, i use white. Chose a smooth socket, no threads for rings,…
There are three pico bonsai so far in the set, each needs three ⌀6mm by 3 thick cylindrical magnets. They could make a perfect gift for a teacher and are suitable for air plants : A rectangular bonsai: This pico bonsai pot, perfect for…
Imprimé en PETG Hauteur de couche 0.20 Périmètre 3 couches dessus et dessous 5 Remplissage 50% Supports automatiques
This is a quick replacement connector for a broken solar light kit that came from harbor freight. Print this laying on it's side, using supports, for maximum break strength in the required direction. Category: Outdoor & Garden
2. Hanging Gardens of Babylon A richly detailed interpretation of the legendary Hanging Gardens of Babylon. The model includes tiered architecture, arches, flowing water features, dense vegetation, trees, and decorative stonework,…
Easy way to mount 200mm x 30mm Noctua fans to the rise garden. Printed in PETG, 45% infill Gyroid infill. https://www.amazon.ca/dp/B07F477B13?psc=1&ref=ppx_yo2ov_dt_b_product_details I bolted in the lower two fans and used wood screws on…
Insert for the deluxe, all-in Kickstarter edition of Vicious Gardens. Prioritizes easy setup with card trays that can be put directly onto the game board, with separate trays for each of the expansions so they can be mixed in when wanted,…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Hanging Gardens is mostly an unusual type of card game in which cards are placed so that they overlap each other and markers are used to claim connected sets of same-color images on the cards. This is simply a replacement marker for the…
Hello, this is the third part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 200*160 mm before slicing (i did it so, to make all print at the same size); and you can use…
Designed this after losing one too many beers to the DBG concert lawn slope. The "spike" will break if you apply too much torque to it, but if you press straight down it should hold enough to stay in place. Would welcome anyone…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Insert for boardgame 4 gardens Upgraded player pieces → pagodas Upgraded player resource area → to print multicolor add a pause to the printer at desired layer and switch filament supports sleeved cards
uses the exact same exterior dimensions of the two original trays, and enables a slightly larger storage of the wooden tokens, but would also suit the normal tokens as well. the tokens container has a curved interior base to enable easy…
A toadstool cottage for the fairy garden, a plant pot, a terrarium or a child's shelf: a chunky stem with an arched door, round windows and a little step, under a spotted cap. Print the cap red and paint the spots white, or swap filament…
Three spotted toadstools for plant pots, flower beds, fairy gardens and terrariums, in three heights so they make a little cluster. The caps have raised spots: print the caps red and paint the spots white, or swap filament at the top.…
Grow large plants on all shelfs of your Gen 3 Rise Garden with these shelf risers. Add 152mm (6in) of grow height to the middle and/or top shelf of your garden giving them the same height as the taller bottom shelf. If you only have a…
Provide your houseplants with the extra light from your Rise Gardens with this houseplant shelf. It's designed to attach perfectly to your gardens shelves and you can use up to 6 per garden. Designed to fit 8 inch plants. Compatibility:…
Hello, this is the third part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 200*160 mm before slicing (i did it so, to make all print at the same size); and you can use…
Easy to remove, these covers have a small lip to aid in removal. The original hole covers for Rise Hydroponic Gardens are difficult to remove because they sit flush making it difficult to get your finger under them. Compatibility: All…
Reduce algae growth when you use your seeds with the seedless pods by blocking light around the pod. Needs to be printed with TPU. TPU is soft and flexible which is gentile on plant stems and allows for plant growth to any size. No need…
These improved stands taper down towards the top to allow more room for the leaves to the plant compared to the stands from Rise. There is also a center strut which provides a central point for clipping the ties. The stands slide under…
! NEW more durable design with improved compatibility with different grow media! Save money and use your own growing media instead of using the Seedless Pods from Rise Gardens. These screen inserts press fit into your existing Rise…
Maximize your growing space with your Rise Garden. Each Rise Garden tray can reasonably fit 4 mature plants. This tray lid is designed to have good spacing for 4 mature plants while having slots for 4 starts. When you are ready to remove…
Silence your Rise Garden! This sound reduction kit significantly minimizes the water flow sounds. After installing, the sounds from the flowing and draining water will be so quiet you'll barely notice them. The quiet hum of the electric…
3 piece set. Garden stake can be used with or without extension. For Blink Outdoor (3rd Gen) camera.
Grow large plants on the top shelf of your Gen 2 Rise Garden with these shelf risers. Add 152mm (6in) of grow height to the middle and/or top shelf of your garden giving them the same height as the taller bottom shelf. If you only have a…
Grow large plants on all shelfs of your Gen 3 Rise Garden with these shelf risers. Add 152mm (6in) of grow height to the middle and/or top shelf of your garden giving them the same height as the taller bottom shelf. If you only have a…
Provide your houseplants with the extra light from your Rise Gardens with this houseplant shelf. It's designed to attach perfectly to your gardens shelves and you can use up to 6 per garden. Designed to fit 8 inch plants. Compatibility:…
3D printable topographic miniature of London, Kew Gardens - 🇬🇧 United Kingdom Capture the beauty of London, Kew Gardens 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo…
