Counting matching models…
===== CZ ===== Jedná se o kompletní krabičku pro převodník GBS-8200. Pokud stahujete mé modely, přispějte mi na vývoj pár korun. Vás to nezruinuje a mi to pokryje alespoň část nákladů na materiál spotřebovaný na testovací výtisky a…
This enclosure for a custom GBS Control is based on Lord Voultar's excellent build guide for a GBS 8200 with some additions of my own. I've replaced the VGA output port with an HDMI converter wired in (Because who want's that clunky…
GBS-8200 RGB to VGA Video Converter Board + SCART Case Remix adding housing for a SCART plug. This is the PCB mounted right angle version which clips nicely into the housing with the pins exposed so these can be attached to the wires as…
Case for GBS 8200 VGA video upscaler with GBS control The housing consists of two parts that are screwed together. Power of device is taken from USB micro module and runs through a switch On the lid there are holes for OLED and encoder.…
===== CZ ===== Jedná se o kompletní krabičku pro převodník GBS-8220. Deska 8220 má více výstupních konektorů oproti běžnému 8200! Viz foto. Pokud stahujete mé modely, přispějte mi na vývoj pár korun. Vás to nezruinuje a mi to pokryje…
My version of GBS Control case for GBS 8200 and two sizes of ESP8266 modules, plus RGBS BNC connectors. The two sizes of the ESP8266 module supported are: 48 x 25mm 58 x 31mm Please choose the corresponding one when you print. Project is…
Beim Weber Gasgrill SPIRIT E-325 GBS (Modell 2025) fehlten mir die kleinen Lenkrollen. Im Original sind einseitig nur Standfüsse verbaut, ich bevorzuge jedoch Lenkrollen weshalb ich einen entsprechenden Adapter konstruiert habe.…
Staubabsaugungsadapter für den Bosch Bandschleifer GBS 75 AE auf osVAC M32 Vacuum cleaner adapter for the Bosch belt sander GBS 75 AE to osVAC M32
Sister project of my GBS Control Case for 8220: https://www.thingiverse.com/thing:4666227 Compatible with two sizes of the ESP8266 WiFi modules: 48 x 25mm 58 x 31mm Please choose the corresponding socket when you print. Project is put…
A new HDMI cradle design for the following VGA to HDMI adapter: https://amzn.to/3Ql7DP2 Updates include a recessed floor to accommodate protruding bottom components, all new geometry, chamfered screw holes for easier installation. Several…
GBS 8200 RGB to VGA Converter/Upscaller Box. Two holes at the back: one to allow for an alternate power cord (I use a USB power source) and adding the possibility of mounting a micro USB connector PCB; second hole for an input cable (I…
GBS 8200 RGB to VGA Converter Box extended to the right so it can fit a NodeMCU ESP8266 chip to use with the gbs-control custom firmware. Also room for a 6pin DIN sock and a switch which I use to turn off the CFW if required This was…
This is a remix from the work created by RetroGameRevival and available here: https://www.printables.com/model/79131-turbografx16-tg16-pc-engine-av-booster-housing-min I reduced the whole size, ditched the non-functioning video mode…
Design After seeing Voultar's install video of this, I had an idea to make a housing for it myself, which was inspired by original cocktail arcade cabs. Video can be found here: https://www.youtube.com/watch?v=1AVXhiTlmgo Hardware Most…
GBS-8200 RGB to VGA Video Converter Board Case with 6pin DIN & Wemos D1 Mini Wifi Designed to house the Wemos D1 Mini to use with the customer firmware https://github.com/ramapcsx2/gbs-control Cut-outs for all the connectors including…
I modified Modellaner's design. I aligned the openings in the front of the case for the Component RCA Jacks (and vga port). I moved the SCART Port as far back on the case as I could to help it clear the RGBS Header internally, so it…
An enclosure for my modded GBS8200 board, to use with gbs-control. It has space for a 128x64 0.96" OLED screen, rotary, and scart connector for convenient RGB signal input. For the scart connector to fit, just buy an aerial SCART…
This is a housing for the Fibaro FGBS-321 Universal sensor. I didn´t find any housing for it so I decided to design this. I use the sensor for temperature sensing so the opening at the bottom is the exact fit for one servo type plug and a…
Tweaked model originally from @Guybrush to have a SCART hole and LR audio holes.
This stand holds the GBS-C from AliExpress (blue plexi version) vertically. In this orientation, the component and VGA ports on the front are blocked, but the scart port on the side is accessible and is high enough off the table to allow…
Fibaro FGBS-001 Mock-Up Design with SketchUp 2014 exported to OBJ Category: Electronics
///// I highly recommend printing&building Thing: 6387573 (updated version by "markeno") ///// I've designed another case for the GBS control unit. You will need 2x M4 x 10 mm screw with nut (for SCART connector) 2x M3 x 10 mm screw (for…
I purchased a Turbo Grafx 16 RGB adapter from eBay and none of the cases looked how I wanted them too, so I remixed this together. Needs supports for the overhangs. You should modify the slicer to user just 1 perimeter for the first layer…
OVERVIEW This project is a 1.5-inch IDPA-focused competition gun belt designed to be manufactured on a consumer FDM 3D printer and assembled using inexpensive off-the-shelf hardware. The goal was to create a lightweight, modular,…
Adds another VGA hole to the HDMI version so that you don't have pick between the HDMI or the VGA version
Handle for belt sander Bosch GBS 75 AE (0601274703) article 1605133036.
OVERVIEW This project is a 1.5-inch IDPA-focused competition gun belt designed to be manufactured on a consumer FDM 3D printer and assembled using inexpensive off-the-shelf hardware. The goal was to create a lightweight, modular,…
Remix of the below, originating from TheJeffChen https://www.thingiverse.com/thing:4666227 https://www.thingiverse.com/thing:4771721 -Increased some of the tolerances and removed sharp edges for easy of fitment -Added a Scart bracket that…
I recently picked the fantastic GBS-C AIO upscaler and found that while it's a wonderful device for the money, it's kinda chunky and takes up a good bit of desk/table space. So let's go vertical!
Update: I have a newer version of this model here https://www.printables.com/model/558172-gbs-c-all-in-one-ali-vertical-stand-v2 This stand holds the GBS-C from AliExpress (blue plexi version) vertically to sit next to a SCART device. In…
