Counting matching models…
I designed this spoon, since the detergent I bought did not come with a scoop. It is pretty accurate to have a volume of 30ml when filled to the brim. The design is stable and strong and can be printed lying on the top side without…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Samsung washing machine insert/flap/cover for liquid detergents. Fits better to the tray than the original item that was included with the machine. Compatible with my Series 9 model (WW90J5426FW) and likely Series 5+ / 7 / 8. See…
Hi, I have created my own Player Agents for the Boardgame Dune Imperium. This is an awesome Boardgame! The Deluxe Upgrade for this Boardgame has awesome models, but is very expensive. So I have printed a lot of new objects for the game,…
Ring from two parts, you can put one tic-tac inside ;-) Great for teambuilding or any other group activity so everybody can feel to be member of the tribe. This is first version. More stylish design as well as different text/graphics you…
Each of the four side pieces has a slot for a magnet. The file was originally designed for a 20 mm x 6 mm x 2 mm magnets. I was having a hard time finding magnets of that size, so I edited the file to make the spot for the magnet 1 mm…
Unlimited knowledge, and it will only cost you your soul! Actual size! Designed in Blender and Inkscape, with the aid of just about every reference photo I could find. Available in two versions: a static prop ( darkhold-prop.stl ) and a…
Hi, this is coaster with Agents of S.H.I.E.L.D logo. The black and white parts are printed separately and then glued together. The black inlay is smaller by 0.15mm, it should be enough for well tunned printer. In case of problems use file…
lampshade for GU10 LED spotlights based on my first design https://www.thingiverse.com/thing:3498515 I have made a GU10 lampshade that can be attached to an LED spotlight. Lampshade printed in vase mode extrusion width 0.8mm (I have used…
A selection of Pellet labels for my Traeger. Use them to identify what pellets are in the hopper. You can add 6x2 magnets to hold them inside the hopper lid, or on the outside of the smoker.
Gents Hat Skull Add a touch of classy creepiness to your shelf with this Gents Hat Skull . This design blends a sharp, detailed skull with a stylish gentleman’s bowler hat, giving it a unique mix of elegance and attitude. Few supports are…
inc 3mf for bambu lab more at https://cults3d.com/en/users/cruse2382/3d-models
Petits outils permettant le réglage fin des tangentes pour une vielle “Nerdy Gurdy V2”. Peut-être cela fonctionne avec d'autre tangentes de la même taille. Un perçage central permet de faire passer un tourne vis afin de déviser la vis en…
This is a storage solution for the free Print & Play (PNP) game Agents of Adventure which the files are provided at PNPArcade . I found the game to be super fun as it pits your 3 heroes against tons of different bosses (Masterminds) and…
The Biogents traps work very well only for mosquitoes. However, it can occasionally happen that other insects or animals gets lost in the trap and may not be able to get out. To avoid so-called "bycatch," I have created a kind of "grid"…
Diameter: 5,5mm Holes depth: 3.05mm I used 9 of this magnets: https://www.amazon.de/dp/B0BMZX8FV3? with this glue https://www.amazon.de/dp/B0036EGDVW?
This is a customized version of the Darknet-NG 13 badge face. I added theme elements from the Defcon32 official theme, including “DEFCON>>>” and “<<<ENGAGE” in the “Neuropol X” font. I also added a small “Agent” silhouette. This face…
Elegant design to store 1-2 bottles of detergent or other bottles like syrup. Inside dimension: 72x80mm Position: Printed on the side to avoid incorrect hook print. Supports: Yes (organic). Can easily be removed. If Snug or other supports…
Since I couldn't find the right measuring cup, I made my own. It holds exactly 15 ml up to the mark.
Custom holder for Bio-Rad ddPCR reagents, which don't typically fit in standard tube holders. Holds a 5mL supermix vial and a 5mL reference assay mix vial; which are typically used together for ddPCR sample preparation. I had previously…
TIRED OF THROWING A PARTY AND SOME JABRONI TURNS OFF THE LIGHT SWITCH THAT POWERS YOUR SMART SWITCH BECAUSE YOUR RENTAL WAS BUILT IN 1875 AND HASN'T BEEN UPGRADED SO YOU DON'T HAVE OVERHEAD LIGHTS? AND YOUR LANDLORD HAS THE AUDACITY TO…
From Original Model: “EXPO Fine-tip dry-erase whiteboard marker holder originally designed by jsmith14 from Thingiverse. Fits 8 markers and can hold them securely in a horizontal position (since markers have the indication to store them…
As there is always a possibility to loose such a small part I've designed the "fan nut" of the Biogents Mosquitaire Mosquito Trap. This nut is suppose to hold the connector-plug of the fan outside of the Trap Body. It's a predestined part…
Wandhalter für den Biogents Mückenfalle CO2 Timer Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Filament: Janbex PLA green Category: Household
Enhanced 3D-Printed Upgrade for BioGents BG-Pro (Top Fan Version) This is a 3D-printed upgrade designed specifically for the BioGents BG-Pro mosquito trap (with the OEM fan mounted on top). The goal of this modification is to enhance the…
While my previous version was OK I though one could use more magnetic strength, I opted out to using rod magnets. Uses ¼ x ½ and ¼ x ¼ rare earth rod magnets (that is if you want the greater holder power) See other version for use details.
All 2 Stratagems in the chemical agents section! Stratagems are: Guard Dog "Dog Breath" Steralizer
Made a little box holder for the cardboard tokens for Dune: Adventures in the Imperium - Agents of the Imperium box. This holder holds all the tokens perfectly and is labeled so you will know which token is which
I use this duct: https://www.printables.com/model/1200992-prusa-core-one-magnetic-3in-and-4in-duct-exhaust-a I like this duct and the fact that it's angled. I wanted to add some flaps to my chamber fan but didn't want to reprint anything.…
Core One heatbed cable cover remix based on the 3Dprintfun model. I modified the original 3Dprintfun Fusion 360 design to use 20 × 6 × 2 mm magnets, that I had available at the time. Two versions are provided: one for 2 magnets and one…
J’ai juste ajouté une pâte pour fixer le modèle de Roloando au détendeur du kit co2.
Child‑friendly classroom phrasing This apple can be used as a hands‑on teaching aid in kindergarten or as a classroom de
I cut this model so it can fit on bed
The Biogents traps work very well only for mosquitoes. However, it can occasionally happen that other insects or animals gets lost in the trap and may not be able to get out. To avoid so-called "bycatch," I have created a kind of "grid"…
TIRED OF THROWING A PARTY AND SOME JABRONI TURNS OFF THE LIGHT SWITCH THAT POWERS YOUR SMART SWITCH BECAUSE YOUR RENTAL WAS BUILT IN 1875 AND HASN'T BEEN UPGRADED SO YOU DON'T HAVE OVERHEAD LIGHTS? AND YOUR LANDLORD HAS THE AUDACITY TO…
From Original Model: “EXPO Fine-tip dry-erase whiteboard marker holder originally designed by jsmith14 from Thingiverse. Fits 8 markers and can hold them securely in a horizontal position (since markers have the indication to store them…
This is a storage solution for the free Print & Play (PNP) game Agents of Adventure which the files are provided at PNPArcade . I found the game to be super fun as it pits your 3 heroes against tons of different bosses (Masterminds) and…
Modified the original design to use two 15mm magnets in stead of 4 smaller ones. I also rotated the handle for better bed adhesion. Recommend using supports for the basket.
If you loose the Nut for the Biogents CO2-Timer which fits the CO2-Tube to the timer, you can re-print it. It works good with PLA, for outdoor-use other filaments would be better. Or you print a full buildplate full :-) The "Insert Tube"…
![Darkhold prop and box [Agents of S.H.I.E.L.D. version]](https://media.printables.com/media/prints/164586/images/1528441_17c009e5-c44f-4b4a-8d0c-ee21366ce306/darkhold-box-photo-downscaled.jpg)
![Kitchen wall DETERGENTS HOLDER [special hook / regular screw holes]](https://media.printables.com/media/prints/562597/images/4508419_6ecd1120-024a-4e60-8a4d-80c00fa813f8/fusion.jpg)
