Counting matching models…
Intro Three storeys to give your Gecko a choice of environments. First Floor: Nearly completely hidden Second Floor: Protection from above and 3 sides, but a wide outward view Third Floor (Roof): High but unprotected position to observe…
Just another vacuum adapter for the combination of GEX 12V/18V-125 with Boschˋs ClickˋnˋClean system or C35. Itˋs modified to fits stronger to ensure that the adapter can not release. Printed in PETG recommended. Itˋs a remix from…
This is a vacuum adapter for Bosch GEX 125-150 AVE random orbit sanders. It uses the same design for attaching to the sander as the official Bosch adapters. The gcode is for printing with Flexible filament. I used Fillamentum Flexfill 98A…
This is a osVAC M32 adapter for the Bosch GEX 12V-125 orbital sander. With the F32 counterpart for the original dust collector. There are 3 models: Bosch 12V M32.stl: the standard model. Bosch 12V M32 Tight.stl: a tighter version. For…
It has a little tighter fit, than the original.
Hello here is a protective box for antenna vector analyzer RigExpert Stick Pro in 2 parts: lower part for the rigexpert ,upper part for the connectors with a separation maintained by 6 magnets 6mmx 2mm. box with hinges and locks , and…
This osVAC adapter fits the Bosch 28mm dust extractor connection. Tested on my 12V circular saw and on the multi cutter (Stichsäge) and GEX random orbital sander. There are two versions of the adapter, a larger one where the osVAC…
Dust collection adapter to use a Kärcher WD6 (or other Kärcher WD vacuums) with a Bosch GEX 40-150 sander (or other Bosch GEX sanders). Print in PLA or PETG with the large round end toward the print bed. Minimal cleanup even if printing…
I needed a vacuum adapter for my Kärcher with a 35 mm hose. couldnt find something for the Bosch GEX 125-1 AE so i designed my own. Fits like a charm.
I can't mark it as a remix of a model from Thingiverse but this is a remix. Designed to fit #8 wood screws. Based on https://www.thingiverse.com/thing:5372438 by hobbid, the model fits the sander perfectly but I was a little unhappy with…
The title says everything - tool holder for the Bosch GEX 18V-125 eccentric sander/ grinder.
This is an adapter for the GEX 40-150 Bosch sander so you can plug your vacuum to it. I recommend you print it with TPU. It fits hoses from 35 to 37 mm in diameter. It fits tightly into the sander. I also included a .step file of the…
The adapter is designed with an additional surface dust collector. Helps removing the dust usually remaining on the working surface. Print relatively well without support even so I'm planning to optimize the design. Displayed model was…
osVAC Adapter for Bosch GEX 125-1 AE
I mad an adapter for my Bosch GEX 125-1 AE executer grinder. There is a rubber seal at the end and I designed a notch in the adapter. It's hard to push it over but afterwards it stays secure in place.
Holder for the famous BOSCH GEX 12V-125 Category: Tool Holders & Boxes
Prints very well standing on the GEX side. Pictures are in Sunlu PLA+ red. Printed on Elegoo Neptune 4 Pro Weight: 23 grams Nozzle: 0.4mm Layer Hight: 0.3mm Line Width: 0.4mm Wall Thickness: 0.8mm Infill: 10% Gyroid Time: 31m
Since I'm switching my tools completely to osVAC, this was missing. Thanks to the osVAC neo library I created an adapter for the Bosch GEX 18V-125. It fits very well, but I might make it slightly more tight. osVAC System:…
There is lock for perfect fit and hold - just insert and turn. I uploaded also STEP files - it is better in case you need edit diameter for hose connection. In case you dont have any CAD software I can make new version with new end of…
hier mein absaugstutzen von Kärcher WD3 zu Bosch GEX
Adapter for the Bosch GEX 18V 125 and maybe some other Bosch orbital grinder. Works with the Kärcher WD3.
The insert is for one half of an L-BOXX 136, and has space for extra paper, dust collector, hose adapter, and some sanding pads. Printed on a MK3S in PETG so it isn't so brittle, standard settings, 5%infill. To print, easiest is to…
This is a hard shell case for the RigExpert AA Series of Antenna Analyzers. Keeps it protected in your Field Kit.
This is a exhaust angle for the Bosch GEX 12V-125 and 18V-125 Orbital Sanders. Max also fit for the other 230V GEX-Models with Alloy base. The Sanders do come with a light dust bag. The internal dust extraction works great, as long the…
Printed in PETG. Support material required.
I designed a TPU/TPE insert for the RigExpert Match that fits in the Rugged Box (Parametric) by Whity . The insert will fit the Match unit and 8x adapters for the type-N connector on the unit. Settings for Parametric Box: (see attached…
Printed vertically in PLA, 6 wall loops, 25% infill, 0,20mm layers, no support
This is a case for the Rig Expert AA-30 Zero hat that goes on top of an Ardiuno Uno, it has a keypad and display. Here is the link to the keypad and display…
I created an extended cap for the RigExpert Stick analyzers that works with the SO239 adapter attached and has a loop that allows you to keep it tethered to the bottom loop on the analyzer. There is a little bit of a lip that doesn't…
Adaptateur d'aspiration pour Bosch Pro GEX40, tuyau 35mm, impression à faire en TPU pour de la souplesse du matériau. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 40 Filament:…
This is a protective box for the RigExpert Zero II antenna analyzer. If you print the box flat on it's bottom and the lid with the letters on the build plate then no supports are necessary. Feed the Zero II antenna connector in first and…
Dieser Adapter verbindet die BOSCH GEX 18-125 oder GEX 12-125 Exzenterschleifer sicher mit einem HT-Rohr DN50. Einfach aufstecken, um 90° drehen, fertig. Ideal zur effizienten Staubabsaugung in der Werkstatt. This adapter securely…
Adapter to connect a Bosch eccentric sander (GEX18V) to a suitable dust collector.
RangeX TPU parts for the DJI HD system - Caddx Vista.
🇩🇪 Deutsch Bosch GEX 18V-125 → GAS 18V-10 L Adapter Dieser Adapter ermöglicht die direkte Verbindung des Bosch GEX 18V-125 Exzenterschleifers mit dem Bosch GAS 18V-10 L Akkusauger. Das Design sorgt für einen sicheren und passgenauen Sitz,…
My father-in-law gave me 2 boxes of COGEX double-sided rangment. The problem was that as soon as I flipped the box all my screws would mix. So I modeled suitable removable boxes, I can finally flip my boxes without everything mixing. PHG…
Dieses Modell ist eine annähernde Version der Originalen Aufnahme für Schleifteller des Bosch Professional GEX 125-150 AVE. Teil ist NICHT zu 100% identisch mit dem Original und etwas Schwergängiger.
V1 Added VTX mount (Immersion RC Tramp) Shortened (3mm) immortal T antenna mount V2 Modified VTX antenna mount
My version of the GoPro mount for the RangeX frame by FPVframe.ch . Print instructions Print Settings Printer: Afinibot A9 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 33 Filament: TPU & PLA Black & White
This fits incredibly snuggly over the rubber o-ring, it required quite a bit of force. The throat over the tool is long enough that it rests on the small bumps near there is no significant wobble once installed. This was generated with…
Case for RigExpert + Arduino board which features a micro usb port instead of USB-A port on a regular Arduino Uno. Features some slack for the Arduino board inside, as the D1 ESP8266 board I have is a knockoff and is half a millimeter…
Top chopped version of the FPVFrame.ch RangeX FPV frame. Only the back camera support is needed and 6x 15mm standoffs. Print instructions Print Settings Printer: Afinibot A9 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 75%…
Gridfinity base for the RigExpert Stick analyzer
this is a adapter for my Bosch GEX 125/150 AVE orbit sander to a starmix vaccuum cleaner (every cleaner with hose outerdiameter of 34.5mm should fit also...) I printed this Object with colorfabb ngen flex and it fits like charm... Print…
Bosch Professional GEX-40-150 Random Orbital Sander adapter for a Wuerth vaccum hose (ISS / TSS / HWS FLEXIBLE CLIPS 4M ISS 30-L/40-M/50-L Art. N° 0702400312 EAN 4056807807720) Strongly recommend printing in TPU for best fit and…
Wether you build antennas or just tune them for use, an antenna analyzer is a useful tool. Over the years, I've owned several, including units by MFJ and Comet. I've also tried Nano-VNA, which are fine but have a steep learning curve.…
Handel bosch sander; ABS print Designg for GEX 34-150 BOSCH or simlar - you mast check it
🇩🇪 Ich war zu faul eine komplette Box zu designen, also habe ich einfach den Originaldeckel einem 3D gedruckten Deckel ersetzt. Ist robust und sollte doch einige Zeit halten. 🇬🇧 I was too lazy to design an entire box, so I just replaced…
This is a hard shell case for the RigExpert AA Series of Antenna Analyzers. Keeps it protected in your Field Kit.
The end cap with a clip to attach it to the cable when the cable is in use. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% Filament: Filamentech PETG Blue Category:…
Wallmount for my Bosch GEX 18V 150-3 - without battery Printed in PTEG with 15% Infill, 3 Walls and Build-Plate-Support
This is only the rail clamp. You will need at least one of these, in addition to the mount. Category: 3D Printing
Noone makes a mount for this excellent laser rangefinder. Until now! It fits the Nikon RangeX snugly, and lets you mount it to the rails on your spotting scope, to an Arca style tripod head, and has a 3/4" hole in the bottom so you can…
Fidgexagon - the hexagonal magnet toy that's a magnetic force to reckon with! With 6mm x 2mm magnets and a satisfying tactile experience, this toy will keep your fingers entertained for hours. Say goodbye to boredom and hello to…
Reemix of the sander vacuum hose adapter for the GEX 40-150 Bosch by Vicente Adauy to fit the universeral Shopvac Camlock coupling by @ Peter H :…
A very simple, but also very useful wall holder for the Bosch GEX150 Turbo random orbit sander. Prints easily without supports. I opted for 0.3mm layer height using the standard 0.4mm nozzle. Use countersunk screws for mounting to the…
This adapter is meant to fit onto the existing plastic port with the rubber gasket. The same port is used for the standard dust collection box. This part is meant to fit snugly onto the rubber O ring on the Bosch port. The opposite end…
Used the male camlock design from Peter H to develop a dust connection for a Bosh GEX 18V-125 sander. It doesn't need supports to print, can be printed in PLA or PETG, layer 0.3 mm
This adapter is to connect Bosch GEX orbital sander to Bosch GAS vacuum hose. Its tight fit, so printer should be well tuned. I printed mine in ABS with organic tree support for those overhangs. It turned out great. 0.2mm 6 walls brim 7mm
![Bosch Professional GEX 18V-125 / 12V-125 Dust Exhaust Angle [TPU!]](https://media.printables.com/media/prints/165963/images/1541573_1f392292-646e-4c7e-b0f0-0a030d4a7bbb/large_display_xxx1_165963.jpg)
