Counting matching models…
A replacement case for Tuxedo's Computer's USB to LAN & Hub . The original I had had a minor issue with the RJ45 connector not locking the cable properly. If you have the same device and the Ethernet cable doesn't lock properly, you can…
Spacing in the back is allowing other cables or cables coming from a hole in a Wall. No supports needed.
Tenda SG105 Gigabit Ethernet Network Switch DIN rail mount You can use standard mounting holes. Lock the nut into the part and tighten the screw so that the network switch is firmly in place. Try a few times. You can also use a drill, for…
TP LINK GS108 Wall Mount Needed a wall mount for my TP link, trying to tidy everything up. Just thought it may be of use to someone else. Simple one piece print. I printed in PETG.
Simple case for the Seeed dual gigabit ethernet nic board with room for a heat sink. Parts needed: 4 threaded m4 inserts 4 m4*12 screws Print instructions: 0.4mm nozzle 0.2 layer height Support on build plate only for the top part.
This 3D printable holder is custom-designed for the TP-Link TL-SG108PE 8-Port Gigabit Desktop Switch , ensuring a perfect and secure fit. It's ideal for mounting your switch on workbenches or mobile parts , helping to optimize space and…
Dust belongs in the vacuum, not in your Ethernet ports. Ethernet ports work hard, so don’t let them choke on dust bunnies. This 3D-printed RJ45 port dust cover is the quick, no-fuss way to keep debris, crumbs, and mystery particles out of…
10 inch Rackmount Ears for Cudy 16-Port Gigabit Light Managed Switch GS1016E
Needed a way to get a small 5-port network switch off of a shelf to make room. Decided to hang it underneath the shelf above. Designed this holder specifically for the TP-Link TL-SG105 switch and to hang from standard hardware-store wire…
PCIc slot cover for H!Fiber Gigabit 2 Port NIC https://www.amazon.com/dp/B07KG3R2RF
Just a very quick holder for a HP USB to RJ45 dongle. We lost it at my work place so I printed a little holder for it. Prints quick without supports and attaches to stuff with some double sided tape. Cutout in the bottom for the cable.
I cut some things and extended the mounting hole to fit my 331T network card. Tested with PLA-CF on a Dell Optiplex. On one of the cases I tested I had to clip the end of the tab for a flush fit.
Case for POE injector that is rack mountable. Adjust the clearance depending on materials you are using.
I created this 3D-Model to mount my TP-Link TL-SG108S Gigabit Switch vertically to the Ikea Bekant Desk to save some space on the desk itself. I hope you like my model. You need to print the STL two times to safely mount the switch. For…
Easily attach and secure Tenda SG105 to Multiboard (Multibuild) grid. horizontal / vertical version securing snaps for vertical version to avoid slide-off Vertical mounting: attach Tenda SG105 onto two pegs, slide it "to the end" snap-in…
PCIc slot cover for H!Fiber Gigabit 2 Port NIC https://www.amazon.com/dp/B07KG3R2RF
Fits that specific model, but may be tweaked for other models as needed via the main files.
Easily attach and secure Tenda SG105 to Multiboard (Multibuild) grid. horizontal / vertical version securing snaps for vertical version to avoid slide-off Vertical mounting: attach Tenda SG105 onto two pegs, slide it "to the end" snap-in…
Made specifically for the YuanLey YS25-0402P 4 port 2.5g ethernet switch with 2x SFP+ ports and POE. Attaches with m3 screws to existing holes. Works with any 40mm fan. I am using a Noctua NF-A4x10 12v fan with a 5v usb to 12v fan header…
A mount for the Knup Gigabit 5 port switch, for use with double sided tape, can be improved but for me it is holding it enough to not justify modifying it, it is not a snug fit, feel free to remix Printed with ABS in 2 parameters and 15%…
I present a stand for a router for wall mounting. For additional cooling, I offer to print separate legs that are inserted into the cutouts on four sides, so that there is a gap for ventilation. Very simple printing, I used ABS plastic,…
I present a stand for a router for wall mounting. Very simple printing, I used ABS plastic, but you can use any other. You can find my modified model in my profile
Made a remix of the stand with open sides for the switch to breathe.
The Linksys SE4008 WRT 8-port Gigabit Switch is designed to stack with Linksys WRT Routers, like WRT1900ACS. Since I replaced my Linksys router with another brand long time a go, I still wanted to be able to stack my new router on top of…
Fits that specific model, but may be tweaked for other models as needed via the main files.
Holder for D-Link DGS-1008D 8-Port Gigabit Switch Printing instructions 0.28 draft profile No supports No brim Happy printing =)
Single NIC backplate to suit Intel Gigabit CT Desktop Adapter.
Mejoras de diseño aplicadas al soporte: Optimización del agarre inferior: Se alargó la pestaña inferior unos milímetros para evitar que el router se deslice o caiga. Ajuste de sujeción lateral: Se modificaron las pestañas laterales para…
This design will hold the 8-Port GIGABIT version from D-Link. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Infill: 30 Filament: Anycubic PLA White Category: Organization
Vertical Stand. No supports needed.
I didn't like the other designs, they were using too much material and the mount was too much visible behind the router. This is a very simple design. Print 2 of these and you're done! Print Settings Printer Brand: Creality Printer: Ender…
i made a under desk mount for the dlink desktop switch
I bought from aliexpress but with no pci barcket so i made it myself. Enjoy !
A quick-release wall mount for the LogiLink Gigabit switches NS0110 & NS0111. Needs two parts per switch
