Counting matching models…
I am in the process of designing/building a spare room model railroad and one of the key features I needed was a drop-down bridge to span across the entry to facilitate a loop layout. My design criteria were: 27" opening, prototypically…
This is a set of detailed girder bridge parametric models created with OpenSCAD that can be customized by changing the length and other details, and new styles can reuse the code. It started out with a design that is common on the…
OO gauge ho gaugeGirder Bridge - Model Railway
A fully self-supporting 80 scale foot wooden thru-girder bridge modeled from the wintertime photo. I haven't printed out and attached the “steel” plates/nuts for the top and bottom above and below the girders where the rods tie in. Going…
This model is compatible with the lego system.
Quick model of an N Scale Girder Bridge, based loosely on the similar Micro Engineering bridge. For FDM Printing, you'll need to print: 2 x sides 2 x braces, 6-7 x cross members. If you have a resin printer, I've had good success printing…
This is a girder bridge created for an o-scale 1:48 model train layout. Although it is intended to fit Lionel Fastrack, it should also work for any o-scale track. I have included the standard 10in version as well as an 8in version that…
M3 Joist Girder with Vertical Bar for Joist System. For best results, print horizontally with variable layer height to increase the number of layers for the connectors.
Broke up the bridge girders so that they can be carried in a gondola. Fits nicely in the Micro-Trains' 50 foot gondola. Printed on Prusa Mini with a brim and no supports. Details will print better on resin printer.
Uses the same clips as the original design. Each shelf can accommodate up to 5 Vallejo 60ml bottles or multiple Citadel bottles.
railroad girder bridge scale to 250 on prusaslicer for ho scale trains.
Utah Bulb Tee 74 inch tall girder. I modeled this in Fusion 360 at full size scale. It is literally 74 inches tall. When I bring it into a slicer, it autoscales it down to fit onto the print board. I modeled it to be scaled down to 2.7%…
M3 Joist Girders for Joist System. For best results, print horizontally with variable layer height to increase the number of layers for the connectors.
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
This is a girder bridge modeled after bridges common in Washington, USA. Long and short versions.
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
Motivation [ I need a long straight bridge element... ] When building railway bridges and the bridge crosses a track on the ground diagonally or crosses a parallel double track, sometimes the available straight bridge elements (172mm,…
Motivation [ I need a curved bridge element for radius R3... ] For a more realistic look of the bridge I designed a rail element for the curved Rail-C radius R3 30° rails. Especially for trains with long passenger carriages the R3 curves…
PLAYMOBIL DREHSCHEMEL Ein Drehschemel für die gute alte Playmobil Eisenbahn. Für den Holztransport etc. verteilt über 2 Waggons. Enge sowie langgezogene Kurven sind mit langer Beladung nun kein Problem mehr. Für die Optik können Ketten…
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
This model is an N-Scaled model train girder bridge designed to fit Bachmann EZ Track. This model comes in 3 sizes (200mm, 150mm and 100mm). Assembly Print Part. Attach to track. Slide EZ Track into bridge, the fit should be snug while…
I picked up an old Kenner Girder toy from a rummage sale that was missing the elevator pieces, so I recreated them from scratch. Includes: Elevator car Top rope guide Spool and crank knob The elevator, spool, and knob do not require…
This is a collection of Christmas-themed girder bridges created for an o-scale 1:48 model train layout. Although it is intended to fit Lionel Fastrack, it should also work for any o-scale track. I have included an 8in version that should…
Motivation [ New design concept for pluggable assembly without glueing ] Glueing for assembly can be somewhat difficult and you easily mess up your model. Therefore this design approach allows a stable assembly by simply plugging smaller…
Protector for Praxis Girder carbon cranks. Same dimensions as the original one. Print in TPU
More work on models of Rokenbok parts that don't have print optimized models. These decorative beams are fun to integrate into builds, but their green plastics seem to be overly brittle most of the time. This model upload features both…
made on nomad sculpt on the iPad damaged beam concrete steel girder Z is 40mm tall but can be scaled up or down and is support-free on FDM
Motivation [ I need a curved steel girder bridge element for Märklin curved rail No. 24912 ... ] After providing several elements for the modular bridge system, I was asked by a model railway enthusiast to consider a suitable part for the…
Prefabricated (Pre-Fab) Girder Tower (part of Imperial Outpost). As seen in Citadel Journal #35 magazine. Can be used with other Pre-Fab structures. Level 2 fits into Pre-Fab Bunker #1, #2, #3, #5. Other Pre-Fab structures from the…
Simple vase design playing around with the max print angle of a Mk4. The idea is that you print the outer frame and inner vertically - the 6 inserts (shown in yellow in the exploded pic) horizontally I might improve the detail in time to…
Protector for Praxis Girder carbon cranks. Same dimensions as the original one. Print in TPU
This model is an N-Scaled model train girder bridge designed to fit Bachmann EZ Track. This model comes in 3 sizes (200mm, 150mm and 100mm). Assembly Print Part. Attach to track. Slide EZ Track into bridge, the fit should be snug while…
Adaptable to suit all requirements through the variable arrangement of formwork girders and walers.
VARIO GT 24 Girder Wall Formwork The variable Girder Wall Formwork System with the proven Lattice Girder GT 24 With girder wall formwork, the arrangement of the individual system components can be freely selected. As a result, the VARIO…
I borrowed a basic design from Thingiverse and re-engineered it for a couple of crossings I will have on a future model railroad. Not super excited about the rust effect paint I used so ignore that as it was a first attempt on this…
Adaptable to suit all requirements through the variable arrangement of formwork girders and walers.
VARIO GT 24 Girder Wall Formwork The variable Girder Wall Formwork System with the proven Lattice Girder GT 24 With girder wall formwork, the arrangement of the individual system components can be freely selected. As a result, the VARIO…
Quickly designed for an event to manage some cables, these hangers are specifically designed to match the girder sizes of my patio, which is some former owner's home improvement nightmare. But I've provided the loose parts as well, so you…
https://www.patreon.com/posts/57677733 https://www.patreon.com/posts/58148742
Wooden box girder bridge with “X” cross beams. Made to be printed in place and supported from underneath. For best results print in resin. The details are too fine for FDM.
A shorter version of this wooden box girder bridge - based on this prototype Chris found .
Various vents, rails and girders to use for scale models and wargame models and scratch built models.
![Märklin H0 modular Steel Girder Bridge element for curved Rail-C No. 24912 [R=1114.6mm-12.1°] (multi part) / Märklin H0 modulare Stahlträger-Brücke Element für gebogenes Gleis-C Nr. 24912 [R=1114.6mm-12.1°] (mehrteilig)](https://media.printables.com/media/prints/620e3817-933c-4f89-b0f3-12501adb3298/images/13150858_9076cefc-5cda-4c33-b51b-6ffdada61a27_cff0d68a-3608-4e99-9ab0-aeb8a86617fb/g_title.jpg)
