Counting matching models…
The boxes for the monsters from Qualith 's great organizer insert were printed a little too tight and damaged the initiative tokens. So I quickly designed an insert as a lid and then labeled it. There is enough space for the initiative…
A modified version of the model uploaded by rpgweb_101633. I made the cutout wider, so that there is no overhang, when the model is printed on its side (see the second picture). Printing the model on its side is preferable in my opinion,…
SVG file to laser-cut a character storage box for Gloomhaven character. Remix of etiennepb's model on Thingiverse.
Loved the file made by rpgweb but not being able to use the card in the holder made it to busy during play so made it wider to fit the monster card in its original holder.
Round Stone Pillar for Gloomhaven: Jaws of the Lion. Used in scenario 12: Beguiling Sewers & scenario 14: Toxic Harvest. You will need to print 4.
This is a organization case for the Gloomhaven 2nd Edition monster standees. This does NOT include the Forgotten Circles expansion. I had three goals with this design: Easy to find specific standees Lidded Easy to insert and remove…
Two desgins for a stand to indicate flying monsters and player characters in the famous board game Gloomhaven. Edit: It can also be used for Frosthaven. Version 3 is a single piece variant while in V4 the upper plate has to be connected…
Trays to hold your Gloomhaven enemies (2nd edition) Together, these two trays hold all the standees for the normal and elite monsters that come with Gloomhaven 2nd edition ( https://cephalofair.com/pages/gloomhaven ). Each group of…
I was tired of moving papertokens around to count how much i have. Therefore I created a simple case. BOM: - Pi Pico - Prototype board (needs some adjustments) - 6 3mm leds -3 Buttons
Different Gargoyle to the Version of Gloomhaven Corners by rbross on thingiverse. Two Versions of the base for different hex angles. Printed with: Tree supports 0.2mm layer height
The design by Qualith did not fit my cards, as measured them to 95.5mm but the slot is only 95.2mm. I increased the width to 95.7mm.
A very rough remix of the Maghex bases into a single Gloomhaven Tile J or Frosthaven Tile 11. I just merged them in Slicer to a single model so the label isn't correct and there's a small chamfer on the bottom where they were linked, but…
A very rough remix of the Maghex bases into a single Gloomhaven Tile C. I just merged them in Slicer to a single model so the label isn't correct and there's a small chamfer on the bottom where they were linked, but I've used it and it…
I refer to om_hb original page for the general and original description. Print on its side for extra strength.
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary MagHex Doors for Gloomhaven I designed these doors to work with MagHex Walls and…
This is a player dashboard for the Gloomhaven or Frosthaven board game. It saves a lot of room on the table and holds pretty much all of the player items. It also works with Jaws of the Lion. I found out that someone is selling these on…
To get the health display directly to the monster stand, we first tried the usual dial indicator stands. But as you need to lift the monster to change it and the playing field can get quite crowded, I designed these alternative stands.…
This is the premium version of my table for Gloomhaven and Frosthaven model. It includes the chairs in position. It also includes the chairs separate from the table if you would like to just print the chairs or put them in a different…
This is the premium landable version of my fountain overlay tile replacement for the board game Gloomhaven. Flying monster standees can land on top of the model and end there turn there. This is a new version of my fountain that has been…
A simple remix with spikier spikes Category: Games
This is a hexagon tile of a pressure plate. Designed for Gloomhaven
This guy is my first attempt to give the tinkerer in Gloomhaven a little company. I found it best to print it in .05 mm and supports for the knife.
Gloomhaven monster tracker. This is a remix of a design from another creator, however I have lost the original source. It uses D20 spindown counters to track monster health.
!! You will find more add-ons for free / pay what you want in my ko-fi shop !! Wooden Walls for the MagHex system. Intended to use in Gloomhaven nd Frosthaven. Regular MagHex bases (3x3 mm magnets) are included. Prints well on .2 and even…
The storage shells should work for the original terrain markers, as well as the new ones added here: objective , trap , and water borders.
Overlay tile for the board game Gloomhaven. The large version is more like a full size wardrobe. The small version is probably closer to the correct size. Since obstacles do not block line of sight in the game I assumed they where below…
Light and Dark Fog door tile for Gloomhaven board game. One note, this takes a little longer to slice. Updated model with custom version with more stable base. Tile Count: 4x (1 hex) Light Fog 8x (1 hex) Dark Fog If you like what I'm…
Rock terrain for Gloomhaven board game. Tile Count: 6x (1 hex) Boulder 4x (2 hex) Large Boulders 4x (3 hex) Huge Boulders If you like what I'm doing consider buying me a coffee: Buy me a coffee Print instructions Supports: No
This is a Nest with bones overlay tile replacement for the boardgames Gloomhaven & Frosthaven. It has a flat top for easy monster landing and like my other models no supports needed. In-Game Info Tile Name: Nest Gloomhaven Tile Count: 4…
I have found many great ideas and tried to mix them for a perfect fit The insert is divided, so it can be printed on MK3S+ and glued together Each part only need to be printed once For map tiles I use another storage, have never tried to…
Various accessories that can be used individually or in combination. The most significant change available, compared to using the stock components, is to switch to the HP-tracking monster standee bases, and monster card trays – this both…
A standee for Gloomhaven/Frosthaven monsters with life counter that satisfyingly clicks into place to prevent accidental movement, and space for 4 status tokens. Life points are tracked with a counter from 0 to 9 and magnetically attached…
3D replace for new RIFT token in Gloomhaven - Forgotten Circles. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.12 Infill: 20 Filament: […
My Standee for beater look and planing in-game. Print Settings Printer Brand: Anet Printer: A8 Supports: No Resolution: 0.12 Filament: Creality PLA Category: Games
Organizer trays for the bits and smaller cards of Gloomhaven: Buttons & Bugs: For the components, there's a large base tray in 2 versions, with or without a slot to accommodate the semi-circular handle for the handled version of the…
The boxes for the monsters from Qualith 's great organizer insert were printed a little too tight and damaged the initiative tokens. So I quickly designed an insert as a lid and then labeled it. There is enough space for the initiative…
Board game insert for Gloomhaven Buttons & Bugs! This 3-piece insert focuses on usability, so that it's easy to setup and teardown your game. Place the "status holder" on your table, take the dials, cards, and modifier trays, and get…
Simple cover for status tokens to keep them in place even if the box is shaking inside the backpack.
A modified version of the model uploaded by rpgweb_101633. I made the cutout wider, so that there is no overhang, when the model is printed on its side (see the second picture). Printing the model on its side is preferable in my opinion,…
added pointyness for fat fingers. click mechanism is reversed to make it easier to substract hp.
This is an adaptable set of storage trays for organizing the myriad of Condition Tokens in the board games Gloomhaven, Jaws of the Lion, Frosthaven, and Crimson Scales. The tray bases hold either 80 or 100 tokens in 5-token compartments…
Netiskněte a nepoužívejte STL file, je tam jen pro ukázku. Použijte SVG. Pro 3 mm For 3 mm Řezat nutno v tomto pořadí: Cut in this order: black - line engrave blue - fill engrave green - line cut red - line cut Upravujte dle libosti,…
Krabička pro karty, žetony a postavu. Do krabičky se vejdou i dvě figurky, snadné vyjmutí a manipulace. Box for cards, tokens and a figure. The box can hold two figures, easy to remove and manipulate.
Inspired by similar models but with less waste material to print and less restrictive by design. Consists of: two big slots on the sides with main intention discard/lost pile. You can choose sides as you wish. small slots for items…
NOTE: This is only a remixed bottom piece of the 59 HP Monster Standee Base. It is specifically a modification of the V12 variant, though it might or might not work with older variants. The remaining pieces that need to be print may be…
SVG file to laser-cut a character storage box for Gloomhaven character. Remix of etiennepb's model on Thingiverse.
This is a card stand for the monster cards and the monster tokens for the board game “Gloomhaven”. I printed it in PLA on my Bambu X1C. The model is a remix of this card stand from printables:…
Loved the file made by rpgweb but not being able to use the card in the holder made it to busy during play so made it wider to fit the monster card in its original holder.
There is a scenario in Gloomhaven JOTL that has a double wide door. This is the double door.
SPOILER ALERT: In Gloomhaven; Jaws of the Lion, in scenario 23; Best of the Best some characters are on one side of the board, and some are on the other. This wall divides the two sections.
Lever for Gloomhaven: Jaws of the Lion. Used in scenario 11: Defiled Sewers. There are 2 styles of lever. One is blockier, like a board, the other is more accurate to the map art. The game only requires one lever. The lever goes on the…
Round Stone Pillar for Gloomhaven: Jaws of the Lion. Used in scenario 12: Beguiling Sewers & scenario 14: Toxic Harvest. You will need to print 4.
Growth for Gloomhaven JOTL. Used in the scenario on pages 12-13 of the scenario book and page 5 of the supplemental book. Print 7.
Element and Round tracker for Gloomhaven, Frosthaven and Jaws of the Lion. Skull round marker was remixed from sceptic-skull Board and tokens have 1x10 mm magnets embedded in them
Really liked the original. But as the monster get a lot of HP in the later szenarios i added a base part you can add to the original standee each representing 10 HP. Therefore you are able to theoretically count to infinity. I also added…
Magnetic Initiative tracker for use with the sliders from my monster card boxes , all the creature trackers can be found there. You need to add a pause in the print to add the magnets in the holes of the Stand. 3x3 mm magnets in the stand…
My version of Gloomhaven Jaws of the Lion came with much smaller initiative tokens and so I needed another way to make the lids. I added lids with the names of each monster written on top as a remix of this one (where the labels were…
I was sick of the chaos in the box, so I made a little tray for the stands for the enemy plates. Tried to minimize use of space. Easy to print. If your tolerances are right, you can even flip the tray without the standees falling out. I…
A tray for coins and traps. A little lid is included, so nothing should fall out. I own the German version, I hope this fits for all versions.
Another tray to organize your game box. Check out my other models. I own the german game version.
Premium versions of the models found here: landable and multi-color landable and Printables Store . This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 3 Tile Type: Difficult Print Settings Supports: No…
Landable 2 and 3 hex versions for sale on my Gumroad Store and Printables Store . Overlay tile replacement for the board game Gloomhaven. Finally, players and monsters can now land on every hex of these boulders. No more worrying about…
Overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Print instructions Supports: No Resolution: 0.10mm Infill: 15% Encouragement If you like what I'm doing or use this in your game consider buying me a coffee or sending…
Rock Column terrain tile replacement for Gloomhaven board game. You can flip this on both sides for variation. Tile Count: 6x (1 hex) Rock Column Print instructions Encouragement: If you like what I'm doing consider buying me a coffee:…
Hot Coals overlay tiles for Gloomhaven board game, 1, 2, and 3 Hex. These are ~4.75mm thick, feel free to scale in Z if you want it a little thinner. Used http://3dp.rocks/lithophane/ to generate replica of original game artwork from the…
Stairs overlay tile for Gloomhaven board game. Rev1 has fewer stairs, Rev2 has more stairs and cracks, Rev3 has better brick definition and slightly larger scale. Tile Count: 4x (1 hex) Stairs Print instructions Supports: No Resolution:…
Stalagmites tile overlay replacement for Gloomhaven board game. I was not having good luck printing other stalagmites when scaled to 28mm, so I made some that hopefully will work better. Tile Count: 6x (1 hex) Stalagmites Print…
Thorns overlay tile replacement for Gloomhaven board game. This printed better than I thought it would but beware of stringing. Print instructions Supports: No Resolution: High
UPDATE: Added V2 with material removed for less filament use, raised wall height to keep from seeing the color of the last card, and put a slope in bottom of the vertical car holder to keep them tipped back. Inspired by Gloomhaven Battle…
This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Print instructions Supports: No Resolution: 0.15mm w/ 0.25mm Nozzle Infill: 10%-80% Notes: I put more infill in the spikes so hopefully they survive minis…
Monster Standee replacement for Gloomhaven Board Game. Standee Count:6 Based off the artwork work of Alexandr Elichev . Works with number bases found here: https://www.thingiverse.com/thing:2872339 Print instructions Overhang threshold at…
Overlay tile replacement for Gloomhaven board game. Tile Count: 2 Different version of shelf non-remix so I could drop the non-commercial license. Got rid of the "cabbage" ;) Original non-commercial version here:…
The Hexes Have It Collection of Hexes for use with board game Gloomhaven, Frosthaven, or a similar hex based game. The hexes measure 1.5 inches from corner to corner of a single hex and 2-2.5mm thick. Three flavors included: Ridge w/…
This is yet another bookcase overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Original non-commercial version here: https://www.thingiverse.com/thing:2758101 Print instructions Supports: No Resolution: 0.08mm Infill:…
Monster standee replacement for Gloomhaven board game. Standee QTY: 10 Based off the artwork work of Alexandr Elichev . Works with number bases found here: https://www.thingiverse.com/thing:2872339 Updates: 2019-01-20 Update: Added multi…
Overlay tile replacement for Gloomhaven Board Game. Tile Count: 12 1Hex, 6 2Hex, 2 3Hex File without water can be used with the pour in water effect resin. Thick tiles are 4mm thick and thin in 2mm. Print instructions Supports: No…
Monster replacement for Gloomhaven board game. Standee Count: 6 Based off the artwork work of Alexandr Elichev . Works with number bases found here: https://www.thingiverse.com/thing:2872339 Print instructions Rafts: No Supports: No…
This is a Rubble overlay tile replacement for the boardgames Gloomhaven & Frosthaven. It has small flat section on top for easy monster landing and like my other models no supports needed. In-Game Info Tile Name: Rubble Gloomhaven Tile…
Multi-material/Multi-color version pictured above available on my Gumroad Store Yet Another Wooden Crate. This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 2 One version has a flat bottom for easier printing.…
Multi-material/Multi-color version pictured above available on my Gumroad Store Yet another Wooden Barrel, this one has rope! This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 3 One version has a flat bottom…
This is an overlay tile replacement for the board game Gloomhaven. Three versions available: normal and distressed versions with and without rubble on top. Tile Count: 6 Print instructions Supports: No Resolution: 0.100mm Infill: 20%…
Updated and improved Single Color and Multimaterial/Multicolor version available on my Gumroad Store and my Printables Club . Flying monsters or summons can land on top of the water. Overlay tile replacement for the board game Gloomhaven.…
You can fly/land on me! Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Note: I made these a while ago and never published them. I didn't love the way the models looked when rendered in thingiverse. I finally printed…
Table with chairs version is available on my Gumroads Store and on my Printables Club . This is a overlay tile replacement for the board game Gloomhaven. Table only model available here. Tile Count: 3 Print instructions Supports: No…
Flying monsters or summons can land on crystal version 2.0 and 2.5, available on my Gumroads Store and my Printables Club . Overlay tile replacement for the board game Gloomhaven. Tile Count: 2 Print Settings Supports: No Resolution:…
Flying monsters can land on me! More gas traps, ha!!!! Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Print instructions Supports: No Resolution: 0.01mm Infill: 15% Encouragement If you like what I'm doing consider…
Tile overlay replacement for the board game Gloomhaven. Tile Count: 6 (you can always use some extra) Yet another Bear trap! This was just for fun. Note: Never stick your hand in a live bear trap! Print instructions Supports: No…
Multi-color/Multi-material and Flat-Top/Landable Treasure Chests available on my Gumroads Store and Printables Store . Overlay tile replacements for the board game Gloomhaven or any 28mm table top gaming. Tile Count: 6 Gold, 6 Silver Pick…
Multi-material/Multi-color version pictured above available on my Gumroad Store Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Square and Spiral versions with corresponding broken versions as well if you like you…
Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Print instructions Supports: No Resolution: 0.10mm Infill: 20% Encouragement If you like what I'm doing consider buying me a coffee or sending me a tip: Buy me a coffee
This is a texture test for terrain tiles for Gloomhaven. Feel free to remix. Inspired by rbross and nestyr's tile sets. I still need to print these to make sure the texture dimensions are correct. Some of the cracks and land separations…
This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Print instructions Supports: No Resolution: 0.10mm Infill: 15% Encouragement If you like what I'm doing or use this in your game consider buying me a coffee…
Deck Organizer for Gloomhaven Since I started using the Gloomhaven Helper app there are fewer items required on the table. However, there are still a few items I find myself having to get out during setup for each game. I put together a…
Monster standee replacement for the board game Gloomhaven. Standee Count: 6 Based off the artwork work of Alexandr Elichev . Works with number bases found here: https://www.thingiverse.com/thing:2872339 Check out the awesome remixes of…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. It means a lot, and us designers really appreciate it. Overlay tile replacement for the board…
![MagHex Doors for Gloomhaven [RE-UPLOAD]](https://media.printables.com/media/prints/fc529e7d-01bc-42a7-afcf-957795ed3548/images/12680901_c3ac7258-e71d-4dae-8c69-06ef71c4159f_33d8a4a7-fd0a-4380-b967-2aab9532f26b/doors-render.jpg)
