Counting matching models…
this is a working for profile for JgMaker Artist D Pro printer. it may work with the non pro version I don't know. supports .16mm and .20mm layer height for right now only supports .4mm nozzle
Upgrade your JGMaker Magic with the BIGTREETECH SKR 3 EZ for improved performance, expansion and best of all, quiet motors! I also switched to Klipper which was a nice improvement as well. There is a video along with other important links…
Copied my Description from my cults3d.com model This is a E3D conversion for the Artist D from JGMaker. It is a full change out of the hotends to use off the shelf E3D v6 hotends and clones with the bondtech/bondtech clone BMG Drives. The…
This is a quick print you can make with left over filament. I allows you reproducibly measure and cut small lengths of PTFE tubing for the JGMaker Artist D nozzles. This will allow you to upgrade tubing to higher spec material or even…
The JGAurora (now rebranded JGMaker) A5S is a great printer, and I'm very happy with almost every aspect of it. However, one place where it definitely leaves something to be desired is in the stock part cooling system. While it worked OK…
This is a total redesign of https://www.thingiverse.com/thing:4840264 . Features added: Clearance for wider fan ducts Double dovetail Wastebin retaining latch Partition preventing the brush from rotating and moving the Waste Bin…
This is a part-cooling fan duct for my BMG Aero mount for JGMaker Artist-D AND the BMG Aero Ender-3 / CR-10 mount by Adolf_Muffin that my extruder mount was remixed from. Both were generous enough to post their step files or my things…
I loved the Kobra version of this. It's very simple, snaps right on and fits snugly, so I remixed it for my SV04 (or any other 20x20mm frame). Find that here . That is working great so I remixed again for my Artist-D with a 20x40 frame.…
I bought a Jigmaker Plate from BenksKreativshop on Etsy (https://www.etsy.com/listing/1781794752/multitool-for-xtool-f1-ultra-jigmaker) and designed a case for all the accessories to have them all together. The two parts that have the…
You Tube link: http://youtu.be/b31a1nX8rO0 The video plays back the first test prints and fine-tuning of Macchiona. He is building the hopper for the next car that I am planning to make me the filament. Il video riproduce le prime prove…
I remixed Adolph_Muffin's BMG Aero extruder mount to fit the JGMaker Artist-D IDEX printer, well known for under-extruding. This mount will work with a cheap Bondtech BMG extruder as well. So no need to pay $65 per extruder for the Winds.…
I designed and built this printer to which I gave the name "ThingMaker ". Public drawings and files that I have done for its realization hoping that someone can give you some inspiration for its realization. You Tube:…
Simple adapters that allow for Z-Axis adjustment using screws (you will need to tap holes with M4 tap for best results). I may add additional components for fans as I get father along with this Artist-D reengineering project... Category:…
Nachdem ich meinen Artist-D pro mit einem 3D Touch ausgestattet hatte gefiel mir keine Kabelführung, daher habe ich meine eigene designt.
Minor tweak of one of the 3 parts of the excellent Purge Bucket designed by shanghaisimon https://www.thingiverse.com/thing:4840264 . You will need to print the waste bin and bucket from his design - this is just a slightly truncated top…
A side panel adapted to fit the 3d printer gmaker-fps1 mini heater. You can simply slot the heater into place and run the cable through the panel hole to the heater. Optionally add double sided Velcro to the back of the heater and into…
This is a mosfet holder for the JGMaker Artist-D or Artist-D Pro printer. You'll need 3 mosfet boards (4.5 cm x 7 cm) and screws to secure them. The boards I've linked to below come in 2 packs. Possibly other brands may work as well. The…
Meine Gantry kann ich verschrauben wie ich möchte, sie wackelt nach kurzer Zeit. Dieser Stabilisator hat für mich das Problem gelöst I can screw my gantry together however I want, but it wobbles after a short time. This stabilizer solved…
I bought a small fog machine to make a bubbling pot for Halloween. Unfortunately, the thing splashes water everywhere. Therefore, I designed an absolutely simple stand with roof which prevents the splashing out. Printed from transparent…
Box insert for Kingdom of Aer: Kingmaker to keep cards from sliding around in the box. Fits sleeved cards. I used Paladin's “Gawain” sleeves. Longer sleeves should be fine, but there isn't room for sleeves that are much wider. I have this…
I had a TFT35 v3 on my other printer and missed it on my Artist-D Pro. I started working on a different mount when I noticed Sebazzz generously included his source file. There are two mounts, The original was designed to mount to the…
1 - M5X8 Button Head Bolt. 1 - M5x10X7 Nut Insert, for spool. 2 - M1.7*8 Screws, for filament sensor stud. Tough PLA No Support
Two parts, one screws into the chassis (in my case, of a JGMaker Artist-D Pro) in the Robin Pro V1.0 holes, then the upper part screws into the lower part and provides mounting holes for the BTT SKR-Pro-V1.2. Upper part also includes…
Remixed Artist-D hot end from Codyacehardware's original design( JGMaker Artist-D Extruder Revamp by Codyacehardware - Thingiverse ). This is for the left side hot end, BL touch mount is included, but I have not mounted one yet or worked…
