Counting matching models…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to make a simple and high quality CNC drawing machine to draw on almost anything. I'll step you through how to build your own…
The DrawBot is similar to the commercially available AxiDraw. It is powered by an Arduino Uno controller, uses a CNC Shield, and GRBL firmware. The approximate cost to build the DrawBot is $100. Recently some makers of the Drawing Robot…
Always make sure you are using high quality eye protection and ventilation while working with lasers. Eye protection is very important! https://github.com/Adamslab/SimpleEngraver This is a 3D printable frame for a simple 2-axis laser…
Case for Arduino UNO, CNC Shield and 60x60 or 40x40 fan (grbl).
Needed parts: 4 M3x12 screws Depending on the height of the installation site, the housing can be positioned sideways, horizontally or upside down. In my case, the legs of the machine are short and it is more convenient to connect the…
Print in PLA 0.2/0.3mm layer height No support needed 2x CHC M4x10 screw 2x T-Nuts M4
FR Modifications apportées aux fichier d'installation du RapidChange sur une Genmitsu en optimisant son volume de travail. Le fichier zip contient toutes les macros pour installer 4 fraises différentes. ATTENTION, certaines valeurs…
A simple CNC Case for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. Update : Version 2 uses M3 bolts to hold the lid on and has space for…
A more advanced CNC Case with XLR Sockets for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. GRBL_SPD for Makita Routers available HERE .…
A more advanced CNC Case with aircraft style GX16 and GX12 Sockets for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. GRBL_SPD for Makita…
It is more and more difficult to find these "vintage" wheels so I've decided to design my owns and share. They are similar to the original one, but not the same. They are beefed up in order to be strong enough to be printed with not many…
This is my try to get a 3D printed tires for my 959 restoration project. They work pretty well for a shelf queen, not sure for a runner, but your are free to try and let me know! AM design has been optimized for 83A TPE material.
I hope you'll enjoy this project, it was a lot of fun to work on. I'm sure there ale stil a lot of possibilities to improve & change so fill free to change it. Components to buy: ARDUINO + CNC shield + A4988 + 4 nema17 motors - 1 8mm…
Schematic and other files: https://github.com/vazhure/gSender-Joystick
This holds the GRBL Offline Controller that comes with the Sainsmart 3018 PROver CNC machine by hanging over the protective side glass. You can still access the controls to quickly jog the machine without removing it from the holder.…
This is a mounting bracket for the Doesbot CNC board with a fan mount to cool off some upgraded stepper motors for my Genmitsu 3018 PRO. I upgraded several components and the stock stepper motors (and crappy A4988 drivers) did not cut it…
This remix adds a few optional files for the extruxy project, which are useful when running the machine on grbl (although this is not required). Drag Chains Chains were made using this f3d file: However I have included stls in the files.…
This remix changes the mounting holes to a different pattern that it can be screwed straight to e.g. aluminium extrusions. For more information about the original model please take a look at…
🇬🇧 GRBL Laser Control Case – Enclosure for Doesbot CNC Board (GRBL 1.1, A4988) This custom-designed case is made to fit the Doesbot GRBL 1.1 control board with A4988 stepper drivers, typically used in DIY CNC laser engravers and cutters.…
Attached is an enclosure for the Arduino + Grbl shield. I have a Shapeoko 2 CNC machine and wanted an enclosure I can attach to the gantry plate. I loosely mirrored the design from the diagrams available from Inventables (link below). The…
Adds a raspberry pi over the "new" Woodpecker CNC controller for CNC3018 machines and others alike. It was designed to be held by the existing screw holes of the clear case. Fit is tight. it will be held just by pressure. Two versions…
Breakout board holder to mount in electronic box, i use mine for PrintNC CNC machine. More info below grblHAL is an open source gcode interpreter that runs on microcontrollers. It is a 32bit fork of the original open source grbl project,…
Simple mounting plate for a grblhal t41u5xbb board. Board mounting holes are sized for m3x4x5 heatset inserts. Holes for attaching the plate to your controller case are 5mm in diameter. WARNING: If you use this model, you're going to be…
Quick and sloppy remix to fit the 40mm fan that came with my DLC kit. Check out the model from Fintech for the rest of the box ( https://www.thingiverse.com/thing:4680702 ). Freecad included, in Case someone wants to tinker with it. This…
English: This amazon qpx controller card case holder is simple. It is divided into two parts, the top and the bottom. The top has two hinges, the bottom of those, need to be glued to the bottom on the lid holder. The lower part has 4 m3…
DIN bracket for https://www.makerfr.com/en/cnc/grbl-32bits-board-v2/ I printed it with PETG.
This is a custom design of the battery holder, for those like me that want to have a "softer" version in TPU.
The Nunchuck gets a nice "click" when you push it in. My display display placement was a bit crooked: both the LCD panel on the PCB and the alignment of the display PCB with the main PCB. Because of that, there is a bit of a gab and the…
You can control a CNC machine using the LCD touch module and the main board. For more information, visit makerfr.com . This powerful controller offers versatile connectivity options, such as connecting the LCD module to the main board via…
This is a very quick remix of @Saur0n's nice woodpecker case: https://www.thingiverse.com/thing:2781593 The original has served me well but I was rebuilding/upgrading and needed some better access for all the additional wiring I threw at…
A Simple Arduino Nano GRBL Sheild Extrusion Mount, Thats Screwless, Do Not Sell / Use Commercialy
Needed parts: 4 M3x12 screws Depending on the height of the installation site, the housing can be positioned sideways, horizontally or upside down. In my case, the legs of the machine are short and it is more convenient to connect the…
English: This amazon qpx controller card case holder is simple. It is divided into two parts, the top and the bottom. The top has two hinges, the bottom of those, need to be glued to the bottom on the lid holder. The lower part has 4 m3…
