Counting matching models…
One day I was taking apart a stepper motor for no reason whatsoever and I found a magnet, so I set it on my desk to sit for a while and it kept getting things stuck to it like screws and soldering iron tips and things of the such. but it…
4x4 gridfinity bin that holds the 5 throat plates that come with the RYOBI Universal Router Table (https://ryobitools.ca/products/details/intermediate-router-table_779/).
2x2 Gridfinty to store Dremel Containers. No Supports needed
A Gridfinity rugged box for all your crochet needs. All bins have the Gridfinity sizes. My wife had to put rolls of felt in the hook bin to raise the hooks up. Be carful when installing the lid you can break the hinges if the top is…
Gridfinty 2x2 Tray for 10 pair of standard 3" x 1/8" parallels. Printed in PLA with standard settings and 0.2mm layer height. Generous clearance for the parallels in width and length. Maintains 1/16" step up height for each size to…
A simple bin for Wera ¼ Nuts, placed so you can pick it up with the ratchet. If you want the numbers in different color, filamentchange at layer 116. Bin for long bits from the set:…
Simple tray to display and organizing the Fisch 3mm-10mm Bradpoint drill bits. Lift drill bit by pushing the shank in the lower pocket and push the edge of the point. Bits are labeled, tray is stackable. Print Orientation If you don't…
Parkside lase measure gridfinity.
I mostly work with 4U height Gridfinity parts. I know the “standard” is 3U, but in my experience 4U makes almost everything easier to stack and organize . This model is designed with very smooth internal traces to allow easy part release…
Eine Gridfinityhalterung für den HP Power Glue mit den Maßen 1x1.
This is a tray for 8 of the Repeat Drive Mini – Mk2 by Repeat Robotics This may work for other 16mm gear box motors. Has a space for a 6mmx2mm magnet for extra holding power for each motor.
This is a tray for 4 of the Repeat Drive Max (or Repeat Drive Mega Spork) by Repeat Robotics. This may also work for other 24mm gear box motor setup. Has a space for a 6mmx2mm magnet for extra holding power for each motor.
2x2 Gridfinity container for socket adapters and universal joints. Holds ¼ to 3/8, 3/8 to ¼, 3/8 to ½, ½, to 3/8, and ½ to ¾ socket adapters. Also holds ¼ drive, 3/8 drive, and ½ drive universal joints. Printed using 0.6mm nozzle, Cura…
A 1x3 Gridifinity base for the Eklind NO. 20911. The Eklind 20911 is a standard Hex key set that ranges from 5/64 - ¼. Because of the size of the Eklind, it kind of dips into the magnet holes of the base. I do not use magnets so I'm not…
Meant to ease one of the biggest challenges in organization: Packing and unpacking to go somewhere. Now you can just grab exactly the gridfinity modules you need, toss them in a bag, and have a place to put them when you're done! Height…
Prints without supports in PLA or any other filiment you care to use i printed in petg as i have loads of it
Prints ealsly i advise a brim but isnt required I printed in PETG because i have loads but PLA would be best
A simply little Gridfinity insert to hold this scraper: https://www.printables.com/model/382906-voron-zero-scraper Measures 1 x 2 blocks and is 12mm high.
this is a slight reworking of pltaylor's desghign theres worked for holding sockets but did not work properly with the gridininty system as once you placed any sockets in it you couldnt stack it under another module i have reworked the…
a gridfinty holder for the casio fx-991es calculator
Short stacks of poker chips make a great fidget toy and since most poker chips are either 40mm or 41mm I made a quick Gridfinity bin for 10 chips. I didn't bother with the magnets since poker chips are weighted and the center of gravity…
Enlarged holes to hold 7mm nozzles. Printed in pla, 200c hotend 50c bed temp, 0.25mm layer height, 0.4mm nozzle.
.3 mm layer height works fine. 10% infill. Let me know if it works with other brands so I can update this page.
simple socket holder designed for 3/8 sockets. Should work around most smaller sockets. .3mm at 10% infill works fine.
Fits in standard Gridfinity systems (baseplates in picture are modified versions of the baseplate https://www.printables.com/model/300603-gridfinity-screw-together-baseplate which was extended to mount on 2020 extruded aluminum), hold…
GRIDFINITY_GRID_2X1_IKEA_MICKE_CUSTOM GRIDFINITY_GRID_ 6X1_IKEA_MICKE_CUSTOM GRIDFINITY_GRID_ 2x5_IKEA_MICKE_CUSTOM GRIDFINTY_GRID_6x5_IKEA_MICKE
3x5x2 Gridfinity Bin for an assortment of taps and according drill bits. Customizable in Fusion 360 or by request.
This is a 3x4x2 custom gridfinty bin to store the Honoson 20 pcs sanding stick set from Amazon. It will fit either of the 3 grit types of the 20 pcs double angle shape. The double angle design allows for easy picking up of one end to see…
Made specifically for this 10 collet set with 4.15mm in outer diameter https://www.aliexpress.com/item/1005007172133278.html Update: Previously I mentioned I bought them for the ArgoFile Artima AT . Unfortunately that didn't work so well,…
