Counting matching models…
This is a minimalist single doser container with a plain dust cap. I don't want to hold n*hundred grams of coffee beans in the grinder so the original Baratza container was a bit overkill for me. That's why I have designed this minimalist…
This slow bean feeder provides consistent, controlled feeding of coffee beans into DF64 or DF64V grinders. Features: Variable Speed via potentiometer USB Powered (5V) with optional LiPo battery support Direction Reverse with push button…
The default hopper that comes with the Eureka Mignon grinder is quite big and badly designed for single dose grinding. This hopper fits snuggly in the enclosure. It's also one of my first prints, so any improvements are welcomed. I'll…
Coffee lovers, unite!
I designed this tool hanger for my multi tool and angle grinder but it works with drills, heat guns, glue guns, etc. Intended to works “butt first” as seen in the photos. If at first a tool doesn't fit reverse it as the taper can vary.…
I am a coffee lover. My designed accessories for Kinu M47 coffee grinders. This is the Lid cover for M47 Classic model.
I made this for my Tupperware meat grinder. I guess it might work on other brands too. The meat grinder end is 57mm in diameter. PETG. No PLA, unless you dont plan to reuse it. I've printed it in clear petg, so that I can see whats going…
This is a printable single dose hopper for the Baratza Encore, Virtuoso+, Vario and Forte espresso grinders. It can be used with the provided lid or the bellows. The bellows, printed in a flexible filament like TPU, will help to blow the…
Just a dosing funnel fitting on Quick Mill Espresso Portafilters with three notches with a cutout to suit Eureka Mignon and similar Grinders
This design is heavily inspired by the design of Eric Chu on Thingiverse (his wasn't long enough for me; half the grounds flew over the tray). Should also fit the Mignon Silenzio and Perfetto. Please check measurements before printing.…
EDIT V2 Update: Had another crack at making it a bit less rough. V2 is a bit more refined with a more aggressive angle for the portafilter and rear clip to hold in place without the need for pads, front tab holder has a relief cut for a…
Keep your workshop organized with this practical wall-mounted disc holder, designed to store angle grinder cutting and grinding discs neatly and safely. If you've ever dug through a messy drawer or box looking for the right disc, this…
I raised the base to place my dosing cup right in front of the chute
This is a blade grinder / platten attachment with different platforms for the Work Sharp Ken Onion type and similar grinders. It allows you to use your grinder as a multi purpose grinder with a platten and platform for grinding and…
I have to grind old dispersion paint off of a few walls this weekend and after ordering the 195239-9 dust cover I was unable to fit it on our trusty Einhell AS-1400's vacuum hose. So I took some time to design this adapter. The design…
Beware, supports are a bit tricky to remove and might require bending special knife. Quite durable even in regular PETG, but fibre-filled materials are preferable. FreeCAD source incuded. Applicable models: Moulinex ME665B3E/350,…
A small replacement 68mm hopper for any compatible coffee grinder. Includes a simple lid. Fits Astro La Speziale and any other grinder with the same hopper diameter. Print in PLA with two perimeters and 0.5mm extrusion width. 0.3mm layer…
Short hopper for better under-cabinet clearance for all Baratza grinders except Sette. Has been tested on Encore and Vario. For grinders that are adjusted by twisting the hopper (all except Vario and Forte) the notches in the base may…
Chucks for mini grinders and engravers
Print in the orientation as downloaded, no supports. There is a small indentation on the wall-facing side if you want to put tacky there, but the 2 screws at the top should be sufficient if not. The grinders are from Walmart ( link here…
Made this salt and peber tray to avoid getting the grinds everywhere inside my cabinets. It fits grinders of 58mm diameter or less. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No Resolution:…
Remove the top cover. Use a long Philips screwdriver to remove the small screw deep in the cover. Print the new button on its side with support enabled. This orientation is important for strength. Pushing the new button into the hole in…
Purpose: To protect and stack your different wet stone grinders. How to parameterize: measure length and width of first wet stone (optional with or without rubber protection attached) ==> note as "lower measurements" measure length and…
A stand/base for the Russell Hobbs salt and pepper electric grinders that helps to keep them nice and tidy and together. It can be used with or without the original clear plastic ones that come with the set.
Lost the plastic leg that came with my Bosch mixer's meat grinder / pasta maker (Meat Grinder Classic/UM3/MUZ6FW4?), needed something quick from what I had on hand. Print without rotation with at least 20% infill and external supports at…
The funnel is designed specifically to be a neat fit on the top of the widely sold peppercorn container and can be scaled to fit a range of containers in a slicer. Store it on top of your own container, and it will always be handy and…
These excellent grinders from WmBounds have lasted us very many years. They never clog up because there is no rough surface for powdered salt/pepper or oils to stick to, so they just never stop working. But they can be a little fiddly to…
Adapter für MIRKA Deros Schleifer auf 48 mm Schlauchanschluss, z. B. von NILFISK Attix Saugern. Adaptor for MIRKA Deros grinders to 48 mm hoses as used e. g. with Nilfisk Attix vacuum cleaners. This model is licensed under CC BY-NC-ND…
Exactly like the original by richgain , but removed the bulge to add space for the original metal tabs.
My Baratza Virtuoso often made messes and left a lot of chaff, husks, etc after grinding. To mitigate this, I designed a small tray that can sit under it and catch any loose elements for easier clean up. It should work for many Baratza…
Hello! My electric grinders are great, but original stand is really cheap… So I decided to do my version of it. I added place for screws, or you can mount bottom part by tape or something else you want. I also added CAD file, so you can…
Thanks to download & ❤. This caddy is designed to fit these salt & pepper grinders: https://www.printables.com/model/1611093-salt-and-pepper-grinders-with-tpu-knobs If you're liking these colors, the filaments are Prusament PETG pistachio…
This adapter allows you to connect the FANZWORK extraction hood for angle grinders with the Bosch Click & Clean system. The adapter is eccentrically positioned to provide as much space as possible for your fingers when gripping. Printed…
These salt & pepper shakers use a base of PETG or PLA, with the black or white handle in TPU. Use sea salt and peppercorns. The internal grinding mechanism is https://www.crushgrind.com/products/crushgrind-shaft 123 mm version. The…
This is a adaption for ECM or Profitec Grinders to support the great Smart Grind-by-Weight project. For details visit https://github.com/jaapp/smart-grind-by-weight It is specifically designed for the NA6 1kg Load Cell available under…
Since stands included with the grinders were super flimsy and flying all over the table and I wanted something simple to try out FreeCAD, I created this. It has place to catch salt/epper leftovers from grinding and place underneath for…
(What is the ModGrind Project?) The KohiWerks ModGrind motorizer project is an open-source motorizer project I aimed to spark a new open source revolution within the coffee community in the space of motorizing hand coffee grinders for all…
These salt & pepper shakers use a base of PETG or PLA, with the black or white handle in TPU. Use sea salt and peppercorns. The internal grinding mechanism is https://www.crushgrind.com/products/crushgrind-shaft 123 mm version. The…
This adapter allows you to connect the FANZWORK extraction hood for angle grinders with the Bosch Click & Clean system. The adapter is eccentrically positioned to provide as much space as possible for your fingers when gripping. Printed…
Printed In Elangoo Hyper Pla plus on my Ender 3v2 took abot an hour :)
Thanks to download & ❤. This caddy is designed to fit these salt & pepper grinders: https://www.printables.com/model/1611093-salt-and-pepper-grinders-with-tpu-knobs If you're liking these colors, the filaments are Prusament PETG pistachio…
Are you tired of always cleaning up the coffee that falls out of the grinder minutes or hours after you are done making your espresso? So was I! That is why I designed this simple tray that is positioned below the grinder chute, so that…
I created this simple adapter to go from an Atom short hopper I had laying around to my Specialita. If you have the height, you can also adapt the tall hopper. Compatible to adapt from: LUCCA Atom, Eureka Atom 65, 75, W 65, W 75, Zenith…
Printed In Elangoo Hyper Pla plus on my Ender 3v2 took abot an hour :)
I have the Problem, that my beautiful Salt and Pepper Grinder lose a little bit of Salt and Pepper while standing on my Table, my solution so far was using regulas Coasters, but this is a very unstylish solution, so I made Custom Coaster…
Küchenprofi makes a great grinder, but they don't come with a stand, and are prone to tipping over, not to mention getting salt and pepper all over your table. This solves that problem while also providing a nice built in napkin holder!…
