6 models
This is a pair of EGR Blockoff Plates that I made for the 50CC engine in my 2018 TaoTao Pony Moped. These reuse the stock hardware. Mine were printed in ABS with 40% infill and five walls, top layers, and bottom layers. STEP files…
I have a TaoTao Pony with the GY6 engine. I'm doing a knock-off Aprilia theme, so there is an option here for that. I have included STEP files, so you can customize to your application. Mine was a press-fit into the container, but you can…
Gasket for the carburetor bowl on a cheap 4T (4 stroke) GY6 engine. Made it wider than the original on some spots where the gasket had empty space in the carb bowl groove.
Luftfilter Schalldämpfer für Chinaroller. Macht das Ansauggeräusch bei Vollgas etwas leiser. Würde je nachdem zu ABS raten, bisher hält das PETG aber sehr gut. Bitte den Innendurchmesser des Schnorchels messen und dann entsprechend im…
If you lost or broke the Plug for the hole in the cover for the fan of your scooter with a GY6 motor here you can print a replacement part that even has GY6 "engraved" on it. The radius of the inner part is 10,25mm the outer one 14mm so…
Made to block carb cooling duct. In my case I had an aftermarket intake boot facing forward with an OKO carb making the old cooling duct useless, so I blocked it.
