Counting matching models…
This project is a slide projector for the Godox round head of the AD200 flash. I print with PETG for decent strength and temperature resistance. PLA would probably be problematic. I printed it with full supports, 0.2 mm quality setting on…
I want more colorgels for my AD200 with the H200R round head. So i designt this magnatic version to easily mount self cutted 67mm diameter colorfilters or the round Rogue lightning filters. Print bouth parts and glue 2-4 magnets, round…
Quick little mount to put your Tapo Hub on a wall. Bottom plate can be fixed with two screws and the top simply snaps on, sandwiching the hub in between. If your printer can bridge really well you might get away without supports but if…
The magnets used are 6mm X 1mm Printed face down and superglue together I have added the f3d,step and 3mf files Hope it helps
Wall Mount Bracket for Tapo H200 Hub Recomend PETG, 5 Perimiters. makes it nice and strong.
Dell PERC H200 HBA cards are often repurposed to home built NAS computers. Due to the nature of a home PC case, these cards receive quite a bit less air flow in comparison to their common use in enterprise rack servers and tend to run…
When I bought the Tapo D230S1 door bell with the Tapo H200 smart hub I was quite irritated, that the hub (which is also the bell) had no mounting options. Quite weird for a household door bell. So I made a mount. :-) Base options Base…
This is a 40x40 mm fan bracket for the Dell H200 HBA. It hooks around the top of the card and screws into a hole on the bottom. It isn't great, but it works better than zip ties. Hardware 5 M3x4mm heat-set inserts 4 M3x22mm or 12mm screws…
This is the same cooler design that I did for the IBM m1015, only modified to fit the Dell H200. Parts list is the same. 1 x print of the model 1 x AVC BASA0715B2U blower fan 70x70mm 1 x 3 or 4 pin fan connector spliced to the fan wiring.…
Keep your living space organized with this sleek and sturdy wall mount designed for two Sony remote controls. This model is optimized to be lightweigt to save filament, yet strong enough to hold your remotes securely. 2 Versions included:…
A 10-inch rack mount for the TP-Link Tapo Hub H200. There are two variants of this model. One with a keystone slot, and one without it. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here…
Generated via the https://gridfinity.perplexinglabs.com/pr/gridplates/0/0 generators. I like this toolbox and I've had it a very long time. It's gone on a lot of Lemons races with me. However it does tend to accumulate lots of unsorted…
Keep your living space organized with this sleek and sturdy wall mount designed for remote controls. This model is optimized to be lightweigt to save filament, yet strong enough to hold your remotes securely. 3 Versions included: -1:…
A 2 part modular rack mount for the TP-Link Tapo Hub H200. There are two variants of this model. One with a keystone slot, and one without it. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the…
EN (translator) I was looking for a decent napkin holder to mount under the kitchen counter. In the end, the easiest solution was to model one from scratch with parameters that suited me—and hopefully most of you who like to spend your…
I lost my low profile bracket and ebay wants 20 bucks for one of these... Fits my Supermicro CSE-826. According to ebay sellers this should also fit the LSI 9286CV-8e, 9285-8E, 9280-8e, 9200-8e, and HP422
This is a simple cuff or sleeve style adapter to use the Proxxon drill rig for melt-in threaded inserts. It fits one of the soldering irons recommended by cnckitchen.com, the sremtch MH2001. It's designed to compress the original silicon…
A simple replacement latch for the Hurom H200 and H300 juicers’ pulp outlet cover — designed to be functional and close in shape to the original, though not an exact replica. For best results: Print with 100% infill to ensure maximum…
Da es schwierig ist, die Artemia-Nauplien von den Eiern zu trennen, wenn der Ziss Aqua ZH 2000 im Originalständer steht, wurde eine Türhalterung konstruiert. Diese kann einfach an einem Türblatt befestigt werden und der Blender kann dann…
Adapter Güde GADH200 Abricht- & Dickenhobel ID=63mm auf AD=100mm für einen großen Absaugschlauch
This shroud blocks the lower gap found in the Thermaltake H200TG aswell as the gap between the fans to reduce air just recirculating and reducing cooling effieciency, also forces the fans to draw air from the bottom filter reducing…
I put the Silvercrest (checks notes) SKWH2000 B2 in my bathroom becuase it gets colder than the artic in there, but i didnt want to just have the remote somewhere willy nilly, so i created this little holder to VHB onto the wall to use…
EN (translator) I was looking for a decent napkin holder to mount under the kitchen counter. In the end, the easiest solution was to model one from scratch with parameters that suited me—and hopefully most of you who like to spend your…
Keep your living space organized with this sleek and sturdy wall mount designed for two Sony remote controls. This model is optimized to be lightweigt to save filament, yet strong enough to hold your remotes securely. 2 Versions included:…
Keep your living space organized with this sleek and sturdy wall mount designed for remote controls. This model is optimized to be lightweigt to save filament, yet strong enough to hold your remotes securely. 3 Versions included: -1:…
Printed with ASA, 3 wall and 15% infill. Both have a tight fit so just need to make the flush with front. The Tapo H200 was used with rubber feets and Rb951 without rubber feets After printing, I drilled 2 small holes and then used wire…
I neglected to pay attention when buying a new (to me) HBA off ebay. This particular card didn't come with the low-profile bracket, and my server only has 2U worth of motherboard compartment. 3D printing to the rescue! Print as provided…
