Counting matching models…
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Upgrade your brush-cleaning routine with the Hairbrush Cleaner ! Featuring fewer, wider combs for a more robust and efficient cleaning experience, this…
I embarked on this project to explore the potential of 3D printing in creating everyday objects. To my delight, I discovered that it's entirely feasible to 3D print a functional, aesthetically pleasing hair brush. This brush is designed…
A simple hairbrush hanger based on the remix by ericvenneker. Can also be used as a squeegee hanger or for other tools and appliances with a hole larger than 4.5mm in diameter. I had troubles with the original model breaking off the pole…
The Hairbrush Cleaner Mini is a compact tool designed to remove tangled hair from your brushes effortlessly . This smaller version of the original Hairbrush Cleaner uses less material , making it lightweight and travel-friendly – perfect…
Use this model for a doll scale or human scale Barbie hairbrush!
Hier ein kleiner topologieoptimierter Haarbürsten-Halter. Einfach mit doppelseitigem Klebeband an der Wand befestigen :) Here is a small topology-optimized hairbrush holder. Simply attach to the wall with double sided tape :)
Print flat with 2mm layer height, 3 walls, no supports, and 30% infill. Assembly: A specific amount of rubber bands are required in order for this to function properly and can vary depending on the kind you use. The brush should be able…
With the Hairbrush Cleaner V.2, you can get rid of all those gross hairs in your brush for a seamless brushing experience!
Hairbrush holder for 3 or 4 brushes, intended to universally fit large brushes up to 2cm handle width. 13mm adapter for slimmer handles is available. Print two of the french cleat wall mount brackets. The intention is to be able to use…
I couldn't find any design for a printable hairbrush that works well so I designed one myself. The bristles are printed sideways to give them strength. This model will take roughly 10 to 12 hours to print and only about 70 to 80 grams.…
You are going to use it like a Knife or like a Hairbrush
Update (8/19/2022): Rev C hairbrush has thicker bristles and fewer bristles to reduce breaking. Also thickened the thin portion of the handle too. Original Info: Print at a 45 deg angle with PETG so the bristles are strong but flexible.…
I designed this because the hairbrushes in our house are always full of hair and even though I have a shaved head, I'm the only one who cleans the hair out of them. I printed this in PLA at a 0.12mm layer height to achieve a smoother…
Hairbrush parts should import in the correct print orientation. Parts slot together but you may want some glue to secure it. Print 0.2mm or finer, 20% infill
This hairbrush was modeled by me in the style of a gravity knife from TikTok. I believe it turned out to be a great combination of fun and practicality.
Quick tool to print so you can easily clean hairbrushes of long hair stuck between the fingers.
Hairbrush holder with 12cm diameter and 15cm tall.
А simple comb with very small teeth. Thin and flexible. I used PLA+ t. 210 / bed 65 / nozzle 0.4 / layer height 0.16 / the height of the first layer 0.2 max speed 30%, I'm not sure about the quality at high speeds. size 160/35/2 mm
Simple model to insert hairbrushes for my kids, so it is extra durable ^^ One version to screw in, the other version is for using double sided tape. The holes are about 27mm wide. File is ready to print
This toothbrush holder attaches to your mirror, or other surface, with a 3M Command Strip. Uses the small 3M Command Strip (1.5cm x 4.6cm) It is in two parts to minimize stringing. The base has two variations, plain and smiley I have…
With this versatile hairbrush holder, you'll add a touch of natural elegance to your space. These containers are perfect for keeping the hairbrushes in the bathroom. These boxes bring order and style to any corner. Useful and stylish…
A small charm with added loop for mounting. An easy build that requires minor gluing. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece.…
Ensure items are flat to build plate. No support required. Print 0.2mm, 20% infill, 3 perimeters.
I created this model to get more space on the sink when my wife brought home a new hair dryer for herself. Print it in PETG with 6 perimeters for the strength needed. It is quite solid. I painted it with the same color as the bathroom…
A simple hairbrush hanger based on the model by Xammie. I have printed this model with Hot3d mat white PLA in a 0.3 layerheight, which is fine for me. The gcode does not include a skirt, this is not really necessary on my printer for this…
Hairbrush holder/rack/organizer/shelf for three hairbrushes with handles up to 2.5 cm wide. Also protects the wall. Please leave a like if it was useful for you! Thanks!
This is a remix of the Glock Hairbrush model from @tonCZEk_350417 with two sides and three pegs which connect the two.
Got tired of hairbrushes being all over the place, so created a way to hang them up. If your brush is thicker, send me a message and we can make it taller to accommodate the brush. Nozzle: Any (we used 0.8) Layer Height: Any (we used…
Printing and Assembly Instructions Print the bristle (5 copies) with TPU. Use the "thin" version for harder TPU and the "medium" for softer. I haven't made a thick version, as I don't think it will work with extremely flexible filament…
COMB WITH A LENGTH OF 22 CM. TOOTH LENGTH OF 4 CM. WITHOUT SUPPORTS.
I wanted to have some more space on the shelf and wanted to have it neat and tidy. So i designed a combined holder for my girlfriends and my hairbrush as well as my razor. Printed in white PLA on my Bambu X1C with no supports.
Print the Bristles first with flexible filament and then insert them with pause at layer height codes in the Body. The bristles will easily press into place. Glue stick or letting the flexible parts warm up on the build plate before…
200 x 130mm with two holes 35mm storage area: 150 x 120mm and 22mm high Print Settings Printer: DIY Sidewinder X1 Rafts: No Supports: No Resolution: 0.20 Infill: 15% Filament: GIANTARM Purple PLA
I was little annoyed of hair lying around so I designed a simple box which can be mounted on a sink cabin side, so you still have easy quick acces to your hairbrush without hair lying all around your bathroom :) It has a bulge to use tesa…
this is a 2 part dual hairbrush holder. the first part is a “hook” with a recessed slot to hold a 3M Command strip and interlocks with the second part the second part has the opposite hook and sport 2 slots for putting a hairbrush on the…
Wife requested a hanger for her Shark Hairbrush Dryer, couldn't find anything so whipped one up. I printed it in PLA. No special settings. To hang it I used #4-6 Drywall anchors:…
Simple holder for Denman medium size hairbrush. May also fit other models, but haven't tried. Double sided tape holds it in place.
Designed this so the brushes could be stored out of the way but easily reachable
Haarbürstenhalter für die Wandmontage Innendurchmesser ist ca 25mm Schraubenloch ca 3,5mm english: Hairbrushholder for wall mount inner diameter ca 25mm diameter for screws ca 3,5mm
Just simple holder
Practical and Durable Comb - Easy to Print Without Supports This model is designed for everyday use with an emphasis on functionality, durability, and ease of printing. It is an ideal project for those looking for a useful accessory or…
This handle is about 21mm in diameter at the head of the brush. I used an M3 screw to fixate the handle on the head. You'll need a rather long screwdriver (11cm minimum).
A very simple wall mount for flat handled hairbrush. Print the wall mount if you plan on using screws to mount it. Otherwise just print the base and attach with double sided tape. If you use the wall mount you might need to clean off any…
Bald Comb – The Ultimate Gag Gift Looking for the perfect gift for a friend who has an “aerodynamic” hairstyle, or want to make a splash yourself? This model is a funny answer to the question: “What do you comb when you have nothing…
This is a skadis mount I designed for a heated hairbrush approx 30 mm diameter. It has 2 pegs and is fairly sturdy. Might work for other similarly sized/shaped items.
This model simply holds a hairbrush and works with Gridfinity.
Nanofog Scalp Massage Comb Hairbrush Stand There are other names for this device. It has Red or Blue lighting and a vibration Massage as well as a fine spray for essence oils if you wish to use it like this Here is a stand. The side with…
Printed this on an Anycubic Cobra 2 Neo and did not use supports. Press fit does work, I did not glue mine. Hole in mount is 7mm, peg is 6.8mm, works great for my brush with a 10mm hole. Note: V2 with magnets has not been tested yet but…
Update 11/25/22: Added a longer screw. As the holder ages and warps the original screws become too short. Compatible with shelving units like this one . Screws may be a bit loose and need to be printed larger. Made in Tinkercad . Follow…
Quick and easy print for your hairbrush
simple model to clean up my bathroom
I keep multiboard on my bed's headboard to keep my charging stuff and tools other stuff organized. In bed. Great news though, you don't need to use it in bed. You can just use it for anything.
Simple box to get my wife and daughters brushes somewhere with all the hair bands LOL
hairbrush holder for wet hairbrush. wall-hanging, fits 1
Wet Brush Paddle Hairbrush Replacement The plastic frame on our Wet Brush broke, but the rubber bristle pad was still perfectly fine. Rather than throwing away the whole brush, I measured the original and designed a 3D-printable…
Hairbrush holder/rack/organizer/shelf for three hairbrushes with handles up to 2.5 cm wide. Also protects the wall. Please leave a like if it was useful for you! Thanks!
Printing and Assembly Instructions Print the bristle (5 copies) with TPU. Use the "thin" version for harder TPU and the "medium" for softer. I haven't made a thick version, as I don't think it will work with extremely flexible filament…
I modeled and printed this very simple hairbrush in the shape of the popular Glock series. It's, easy to print without any supports . You can print it with 0.4mm nozzle, but for better details I will recommend 0.25mm as I used. There are…
