2,230 models
I've added one version with a inbuilt nut and another with knurling. The internal valve should be printed with 100% infill. The included .gcode files are configured to print the valve at 100% infill, while the outer body is set to 4 walls…
it´s a very simple hook to use it for decoration.
Presenting the Twist Lock Mason Jar Lid, specially designed for the Alternative Jar Lids Contest . This innovative lid embodies a unique twist-to-lock mechanism and, when unlocked, uncovers an array of holes, transforming your mason jar…
I have lost cap for my shaker. Unfortunately, it has quite unique thread that is not continuous, but separated into four parts. It has inner diameter 36 mm. I enclose also editable file for Fusion 360, if anyone will need to modify the…
Einfacher Fensterhaken zum Einhängen am Fensterrahmen für das Befestigen von Deko-Artikeln. Je nach Stärke des Fensterrahmens habe ich die beiden Seiten in unterschiedlichem Abstand gewählt. Entweder 20mm oder 15mm; einfach entsprechende…
Install with an M3 or M4 countersunk screw. I printed it as follows: PETG .1 mm layers .4 mm nozzle no supports 5 perimeters Would love to see your makes! :)
Der Wandhaken kann an der Wand oder anderen Gegenständen befestigt werden, damit man Ordnung hat. Es können zum Beispiel Schlüssel, Taschen und sonstiges aufgehangen werden.
Wandhalterung für Schallplatten, auch für andere Gegenstände nutzbar. Supports needed!
A friend suggested a spice container to carry his favorite spice(s) with him to add flavor when eating at a restaurent. This prints well in PLA. I used 0.3 layer .04 nozzle, and 10% infill. No brim nor support needed. I glued the insert…
paint can shaker can be attached to any drill with a standard ¼" bit. use this to shake paint cans. print in two pieces and glue the two together. make sure not to glue the fins to the base. i used petg for the strength and flexibilty.…
This is a hook that slides onto 28/30mm pipes. Simply scale it to fit other sizes or use the step file for customization Prints the hook in STL orientation with 4 outer layers, 5 top/bottom layers and 25% infill. — I would be very happy…
Ein Haken für eine Duschwand bis 8mm Stärke
Add flavor to your dishes with the natural beauty of a quartz crystal shaped salt shaker. This model is designed to be printed in vase mode. One should print 4mm of bottom infill; that is 20 layers at 0.2mm layer height. Print with larger…
Der Stopfen verhindert, dass Tabak in das Phunnelloch fällt, und so die Möbel beschmutzt werden.
Passend für ca. 30 x 30mm Vierkant und Ausschnitt für Durchmesser ca 23mm Suitable for approx. 30 x 30mm square and cut-out for diameter approx. 23mm - Besonders zu empfehlen, wegen Stabilität und Temperatur: Filament: PETG Perimeter: 4…
I had this idea that I wanted something to keep my soldering iron base together with the brass sponge holder. For whatever reason I had decided that it was entirely too much hassle moving these two objects separately so set about…
Originally designed by Guido van Hout, slightly remodelled with coarser threads and chamfered inside/outside to reduce overhang and seam size. Also increased size and added slotted hole. Note, while printing I had some internal strings…
This is a replacement Control Card (Part No. B2839) for use with a Hakko FP-102 Soldering Station. This is the "key" that needs to be inserted into the slot on the front face of the soldering station in order to use the soldering station…
Designed for Hanno Fluted Wooden Salt Mill from Create & Barrel but will work for any 2.25" shakers
If you want to empty a barrel etc using a siphon but find it uneasy to start the siphon - this is an easy way to do so. This shaker siphon is a actually just a valve. By shaking it down into the water (or other liquid), that water can…
For people who own this printer, they are familiar with the weak vertical construction. Because of the shaking the printing quality is suffer. So I made this to prevent the problem. After mounting it, the better surface finish was…
VERSION 2 OF KOHAKU IS NOW AVAILABLE. THIS VERSION NO LONGER RECEIVES UPDATES. Grab the model from the following pages: https://www.crealitycloud.com/model-detail/66f6b2e5c3bc2dd50dc78f31?source=6…
Follow me on Instagram ❤ Facebook ❤ TikTok ❤ Telegram ❤ Patreon ❤ Pinterest ❤ Haku (Miyazaki) 🐲 Commercial License Do you want to sell prints of my models? You can purchase commercial licensing by joining the Commercial License in my…
Fun fidget toy you can spin around your fingers making tricks and impressing your imaginary friend! Print a Christmas Chain of appropriate length (I'm using length 14, it feels nice) and attach the Ring and End to the chain. Ready to…
Pair of salt and pepper shakers designed to mesh together and turn as gears upon their stand. The bottom is threaded to fill the shakers. Enjoy and happy printing! :-)
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
Info: another hand model for valve cap ALOHA! Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already scaled original to best fit, so just print this at 100% scale or adjust slightly. 3mf file…
NOTE: The images are of the BAMBU STUDIO model. As I do not own any Prusa printer, or know how to use Prusa Slicer properly, I cannot guarantee your prints will look the same as mine if you use the converted Prusa .3mf files. If you sell…
Shaker Sizes (Diameter x Height): 42 x 35 mm 42 x 50 mm 42 x 65 mm Grids: small, medium, large, open closed, small, medium, open closed, medium, large, open Lids: plain “S” for salt “P” for pepper “C” for chili, curry “O” for oregano…
Salt shaker in a kind of spiral design. I printed the salt shaker in PLA with a leyer hight of 1,5mm. The cap for the pepper shaker has only five holes (Model also attached). Important: If the screw cap is difficult to turn at first,…
A coin sorter for US coins - Quarter, Nickle, Dime, Penny. Just add coins, and shake to sort.
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
Attention! This is only the customized top part! please print the rest from https://www.printables.com/de/model/705295-creality-ender3-v3-ke-anti-shake-construction I have shortened the top part of the Anti shake construction for the…
Printed with a Bambu P1S in PETG without any supports.
Edit: We've update the original to now include a revised mini version including: * Better stacking so the lid fits when both stacked and collapsed * Less printing time * Rounded Edges Get the new version here >>…
When you have to shake paint cans, this is the best tool. Hold the shaker onto any battery-powered screwdriver, open the lid, insert the jar upside down, close the lid, and press the button on the screwdriver. The paint will be agitated…
Deutsch: Ich habe einen schnell und einfach zu druckenden Helmaufhänger designed. Einfach auf der Seite drucken. Wenn euch das Design gefällt postet doch ein make oder lasst mir ein like da. Gerne durft ihr auch remixen. English: I…
Hook collection for Ikea Skadis
Technical background: Input Shaping on Klipper can be tuned with G-Sensor. When using a rooted Nebula Pad FW, the tuning produces the measured vibrations profile .csv and suggests shaper settings + max acceleration under these settings.…
STOP - BEFORE YOU PRINT THIS MODEL - CHECK OUT OUR NEW AND IMPROVED DESIGN HERE: https://www.printables.com/model/327900-stackable-lego-brick-sorter-sorting-box We store a lot of our LEGO bricks in two types of Ikea Containers, the Sanla…
I combined two very useful models into one comprehensive model. Many thanks to Alex Y and Hiart Printshop for sharing their models. I share only combined parts. Other parts necessary to build all model please download from original…
Simple hook for a door to hang something - einfacher Türhaken um Sachen aufzuhängen Designed for a door with 20mm width - Designed für eine Tür mit 20mm Breite
PLA material chip 0.4mm printed without backs layer height 0.15 mm two sieve sizes 2mm and 5mm
Das sind kurze Haken die man in das Ikea Skadis Board einhängen kann. Die Längen sind wie folgt: Länge V1 = 10 mm Länge V2 = 20 mm Länge V3 = 5 mm Der Sitz der Haken in dem Board ist lose, nicht fest!
Get tired of refilling shakers every other week? Here's a larger capacity shaker that should go longer. A shaker for anything you want to put into it. The cap holes should be correct for most mid grain salt consistencies, but that will…
This set includes 7 different bench dog designs specifically created for 20 mm workbench systems (e.g. Wolfcraft-style tables). Originally designed for a specific bench, the collection evolved into a versatile set of shapes to cover a…
Haku (Miyazaki) 🐲 Commercial License Do you want to sell prints of my models? You can purchase commercial licensing by joining the Commercial License in my Patreon .
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
This is a mixer for model paint like Vallejo you still need a type 608 ball bearing Notes: for more stability in the drill chuck i have printed part2 with 100% infill
Door Hooks (expandable) Hooks for the door, which can be expanded as desired with the connectors. The dimensions of a hook can be seen in the pictures. There are three connectors, which allow a distance between the hooks of about 35, 55…
I made this spikes for accupressure mats. Printed with PETG 0,2mm 100% infill. Sew or (hot)glue the spikes onto a thick soft towel or pillow. Use on your on risk! You can injure yourself.
Full tutorial: https://learn.adafruit.com/crickit-lab-shaker/ Build a lab shaker to agitate parts with PVA supports! This DIY shaker uses an Adafruit Crickit, Circuit Playground Express and DC motor. The speed is adjustable with a…
Um an den Dachstangen ein wenig Deko und eine Lichterkette zu befestigen, habe ich diese Haken entwickelt. Die Modelle sind alle zweimal zum Download vorhanden, einmal mit Beschriftung und einmal ohne. Ich kann die Dinger kaum…
This is a simple shaker/mixer that attaches to your hand drill (corded/cordless) to drastically speed up the time it takes to mixing of a can of spray paint. No longer do you have to shake the can manually for a minute or more. I've…
Das Original von wildlifelove.de Unser Clip-Haken für die WIGO Rolli ist ein echter Dauerrenner seit 2023: Der erste Haken seiner Art für die WIGO Rolli Welle zum Einclipsen erfunden und entwickelt von wildlifelove.de Bequem nach dem…
one day i searched for a haku dragon form model to print and i was surprised by the lack of choice. So i decided to make my own model. ps: it's my first avanced model for printing! please if this is impossible to print tell me. Enjoy.…
This is a convenient paint shaker for spray cans. It consists of a hollow cylinder with an elongated hole at the bottom. There are two sizes availabe: 55mm (works for smaller cans like those from Edding) and 68mm (works for most other…
Feel free to support my work and leave a tip.
Hey there, 12mm /25mm Haken 0,2mm PETG Enjoy and like it if you really like it :D
The shaka sign is a gesture of friendly intent often associated with Hawaii and surf culture. (from wikipedia). Thanks to soozafone for their original design Lucky 13 Printable Jointed Figure
This is an adapter to use with the massage gun so popular right now. I'm not sure if the massage-bits are universal among the several gun-models, but the support diameter is about 18/19mm. In any case, the rubber gasket need to be applied…
Fill one side up with pepper and the other one with salt. By twisting the plugs, you can open and close the slit on the shakers side, to dispense some flavour on to your meal It is best be printed in its given orientation but due to its…
Replacement for lost cap for standard 300ml shaker. I recommend printing with PETG material using "ironing".
Allows you to strap in a can of spray paint and attach to a reciprocating saw blade and install in a reciprocating saw such as a "Sawzall". You will need a hook and loop strap as well as #10 or 4mm bolts and a spare blade. Print Settings…
This Shakespeare globe theatre was initially made as an English assignment. I made it in Blender and also made some renders with it. Ironically, this was made nearly a year ago, but I finally got around to uploading it. :) Here's a small…
Print it, mount it and hang something on it. Like a jacket or a towel… Hook sizes: Hook1 ~80x40mm Hook2 ~80x70mm Hook2v2 ~80x70mm Hook3 ~100x25mm Printorientation as shown. All given hooks are compatible with the provided fixation to…
One version is installable and removable without sliding it out to the side, the other is slide-out only. Best printed in PETG. No support needed. --- Eine Version ist ein- und ausschwenkbar, ohne den Haken zur Seite herausschieben zu…
I created a hook for the flexi dog leash. Glue the two parts with CA together. I have printed the parts with PETG, but PLA is also working. Use 3 outlines for a good stability. Infill 15%.
Hier gibt es eine ausführliche Beschreibung: https://druckwasdaszeughaelt.de/einhorn-regenbogen-garderobe/ https://ko-fi.com/dwdzhde Die Idee war, eine individuelle Einhorn-Regenbogen-Garderobe zu entwerfen, die trotzdem nicht zu kitschig…
Haku's articulated dragon in Spirited Away
Not sure where my key was lost, but I made this to allow me to change settings on my Hakko FX-951 soldering Station. It will probably work on other Hakko soldering stations that use this same key. When printing this use 100% infill, since…
Kitchen Aid Artisan Halterung für Knethaken, Schneebesen etc. Infill 42% Befestigung: 4x35 Panhead Schrauben Wenn dir mein Modell gefällt, würde ich mich über ein Like freuen If you like my model, I would be happy about a Like
Easy to print in place. Will fit on a 180mm X 180mm build plate.
This hook has been designed to be used in piping rails of caravans and motorhomes as well as in rails of awnings. Perfect for towels, clothes and other stuff. It also has a center hole for cloths on hangers. Have a look into my CAMPING &…
Es sind zwei Ausführungen von Garderobenhaken. Gedruckt habe ich es aus schwarzen PLA mit 30% Fühlung.
Two things happened to me recently: I moved out of apartment into a house where I have to shovel and salt my own driveway and walkway; and I bought a 3d printer and learned OpenSCAD. This was my first OpenSCAD model partly to teach myself…
Für den Wohnwagen wollten wir ein Fensterbrett haben, um Kleinigkeiten darauf abzustellen. Das Fensterbrett ist aus 40 x 10 mm Leisten zusammen geklebt mit Wasser-festem Holzleim. Die Ringschrauben sind mit Einschraubgewinde M4 befestigt.…
Garden Hose Shaker Siphon with Quick Release version 2 This practical Shaker siphon has an integrated valve that allows you to empty any container containing liquids. It is designed to be compatible with garden hoses of different sizes…
This project emerged as a Christmas gift. It turns out that my mother-in-law loves the Buddhist theme, everything related to meditation, yoga... and my sister-in-law had a super cool idea to gift her hanging chakras. Honestly, it was the…
English A simple but stable wall hook, printed on a Prusa MK3S+ with Prusament PETG Urban Grey with a 0,6mm nozzle and 3 outher perimeters, 15% Gyroid infill. I also use the hooks in the garden house, so I printed them in PETG. Deutsch…
travel salt shaker / salt and pepper for travel Solniczka i pieprzniczka :) zamykane pojemnik - szczelnie zakręcane, które na pewno nie otworzą się w plecaku czy torbie, bo są szczelnie zakręcane. / Salt and pepper shakers :) — secure…
Remix to fit FX888 soldering iron. Uses M3 x 5 brass inserts instead of captive M3 nuts. Requires 2 x M3 12 hex head bolts. Printed in PLA as this is not near the hot parts. It clamps around the part you hold with your hand. If you print…
Haken für die Streben im Luftvorzelt. Der Haken kann einfach an den Streben angebracht werden.
English: This door hook is a remix. Well, more or less. I rebuilt it from scratch in Onshape, and instead of the original file of 13.5 mm, I integrated a distance of 14.5 mm, because our doors are a bit wider. This stable door hook can be…
Egg percussion shaker rattle It prints in one piece with the beads sealed inside the egg. Once printed just drop the egg onto a hard surface a couple of times to free up the beads and start shaking :) See it in action here:…
Designed this mostly for fun and because I couldn't find anything else like it. A simple but versatile percussion instrument with a hexagonal pattern grip surface. Depending on what you fill it with, you change the nature of the sound it…
This hook has been designed to be used in piping rails of caravans and motorhomes as well as in rails of awnings. Perfect for towels, clothes and other stuff. It also has a center hole for cloths on hangers. Have a look into my CAMPING &…
This is a little nunchaku for all the ninjas out there ! :) ⚠ Need supports so make sure you have the tools / the time to remove them properly (personally I used my fingers - they still hurt haha) Make sure to print it as big as you can (…
Ein kleiner Haken, um Handtücher am Badheizkörper aufhängen zu können. Die Rundung hat einen Durchmesser von 25mm. Er kann ohne Support gedruckt werden. A small hook to hang towels on the bathroom radiator. The rounding has a diameter of…
Overview Inspired by the Weber Workshops blind shaker , I have created a 3D-printable version for those of us who want to experiment with a different distribution method! This tool is intended to help homogenize grounds via agitation.…
Acoustic panel hooks as wardrobe or something like this. --- Garderoben - Haken für Akustik Panele oder ähnliches
Die Haken klinken sich auf der Innenseite der Welle ein. Man kann sie auch nutzen, wenn die Fronten drin sind. Gedruckt habe ich sie mit 12 Wänden und aus PETG. Wenn es noch Ideen gibt, was man für Haken und Ösen an den Haken machen kann,…
Small salt shaker. nice dosing of salt. Original file has a high of about 60 if assembled. Print instructions Hmm no speciffic instructions.
A fun salt shaker to embellish your kitchen. Also usable for pepper. Happy printing!
This hook has been designed to be used in DOMETIC tents and awnings. Perfect for towels, clothes and other stuff. Enjoy! Material: PETG Layerheight: 0.2mm or better Infill: 30%
Tiny Shaker in 1/6 Scale for doll cocktail party. Printing from PLA, without supports, layer height 0.2 mm. + Ice Bucket with Lid, Tongs, Cutting Board, Cocktail Tray and Sticks I used mini glass beads for the drinks, and 3mm cube-shaped…
