P
PrintablesXx_xX
Handgrip
A hand grip used as part of another thing Category: 3D Printing
- Downloads
- 288
- Likes
- 9
- Rating
- 5
Search results: handgrip
35 models
P
PrintablesWgLabs
FUJIFILM XM5 HANDGRIP
my own designed fujifilm xm5 handgrip, you can use ¼" for the 3 thread inserts
- Downloads
- 211
- Likes
- 7
- Rating
- 0
P
PrintablesDaPain
R36S Handgrip / Controller Grip
A Handgrip for the R36S, Fits perfect for mine. Controller Grip Handheld
- Downloads
- 157
- Likes
- 14
- Rating
- 4
P
PrintablesAnderfrank
GoPro Handgrip w/ Lanyard hole
This is a remix of the GoPro handgrip by Kart5a. I just added a hole in the bottom back of the grip to be able to put a wrist strap or lanyard. Print Settings Printer Brand: Monoprice Printer: Maker Select Plus Rafts: Doesn't Matter…
- Downloads
- 156
- Likes
- 19
- Rating
- 4.33
P
Printablesgeokscott
Handgrip Hand Grip
This is a hand grip I made for holding a yagi antenna. The mount is 13.5 mm and fits in a typical 15mm square tubing boom. The antenna in the picture is this one: https://www.amazon.com/gp/product/B083GG3ZQ6 You can glue or screw the…
- Downloads
- 128
- Likes
- 8
- Rating
- 0
P
Printablesmakerl1969
Hex-bit storage 8x3 + handgrip
English (Deutsche Beschreibung siehe unten) I offer the hex-bit-storage in several variations : This version offers room for 8 x 3 bits and for the Wera Rapidaptor (If you have no use for the Rapidaptor, see the other variations below)…
- Downloads
- 120
- Likes
- 12
- Rating
- 0
P
PrintablesLenY
Clamp for PARKSIDE Hammer Drill handgrip
Replacement 3D printed clamp which is used as part of handgrip for electric hammer drill PARKSIDE PBH 1050 B2. Mine snapped so I had to recreate new one. Print instructions Printed on Original Prusa MINI using Prusament PLA and 0.2 mm…
- Downloads
- 109
- Likes
- 21
- Rating
- 5
P
Printablesgeokscott
Handgrip Hand Grip Version 2
Version 1 of this hand grip is here: https://www.printables.com/model/984190-handgrip-hand-grip Both mounts fit either grip This version is a smaller version with a slightly tapered tale. I find it more comfortable. I made this grip to…
- Downloads
- 98
- Likes
- 7
- Rating
- 0
P
PrintablesGreg LFT
Fujifilm X-E5 handgrip
Fujifilm X-E5 Grip Better grip feeling and better stability. Supports needed for the bottom screw hole.
- Downloads
- 82
- Likes
- 3
- Rating
- 5
P
PrintablesBill
Panasonic Lumix GF3 Handgrip Version 2
This Panasonic Lumix GF3 Handgrip Version 2 is a remix of my previous design, a Panasonic Lumix GF3 Handgrip: https://www.thingiverse.com/thing:3457599 This design remixes and uses the larger grip found on this great design, a Pentax LX…
- Downloads
- 64
- Likes
- 8
- Rating
- 0
P
Printablesxythobuz
ASG M11 Silencer / Handgrip
This is for the 6mm BB Airsoft version of the ASG / KWC Cobray Ingram M11 CO2 NBB . Design inspired by the original Mac10 suppressor. Comes in two parts that screw together, with an additional optional 2-part handle that attaches to the…
- Downloads
- 61
- Likes
- 2
- Rating
- 0
P
PrintablesDrenth Engineering
Kärcher pressure washer replacement handgrip / handle
The pins go in the slots where the old handle was mounted and you need 2x M5x20 socket head screws to lock it in place. I tapped the holes of the print with an M5 tap and screwd the handle in. I printed it in PC-CF and it fits really…
- Downloads
- 43
- Likes
- 2
- Rating
- 0
P
Printablesbonzai000
GL1500 handgrip grommets
Should work well to replace the often missing passenger handgrip bolt covers. I have the longer pair but not the shorter to base the model off. Once I've printed a couple I'll post pictures/makes. Probably best printed in PETG or TPU…
- Downloads
- 42
- Likes
- 1
- Rating
- 0
P
PrintablesJakub Šperl
Handgrip
Handgrip for insects doors or others doors, windows etc.
- Downloads
- 41
- Likes
- 3
- Rating
- 0
P
PrintablesVP3D Printing and Design, LLC
Anti Vibration Handgrips for Suzuki Hayabusa
After many years of jackhammering concrete in the pool business, riding my sport bike quickly became painful due to the vibrations from the bike causing my hands to go numb. This custom made grip, printed in TPU, both reduces vibration by…
- Downloads
- 40
- Likes
- 12
- Rating
- 5
P
PrintablesXx_xX
Handgrip with hanger
Hand grip with a hole to hang it Category: 3D Printing
- Downloads
- 39
- Likes
- 1
- Rating
- 0
P
PrintablesDom's 3d Print Shop
Worker Swordfish and Stryfe handgrip
A repost of my first design . It's an handgrip designed in two versions: one for the Worker Swordfish and one for the Stryfe. To attach it to the blaster i used a bit of sticky tack jammed in the rail.
- Downloads
- 38
- Likes
- 6
- Rating
- 0
P
Printablesblechbude
Nikon S2 SP Griff Griffleiste, grip, handgrip
Einfacher Griff für die Nikon Messsucherkameras S2 und/oder SP. Könnte auch an der S3 bzw S4 passen, aber diese zwei Kameras stehen mir für Testzwecke nicht zur Verfügung. Für die Montage wird eine 1/4" UNC Schraube benötigt, es passen…
- Downloads
- 37
- Likes
- 5
- Rating
- 0
P
PrintablesGuillaume Ste-Marie
Motorcycle TPU Handgrips (Left & Right)
These motorcycle handgrips are designed to be printed in TPU to provide a comfortable, flexible and durable grip. The model includes two versions : Left grip – standard hole diameter Right grip – larger hole designed for the throttle side…
- Downloads
- 36
- Likes
- 10
- Rating
- 0
P
PrintablesChristopher Nupp
Leica Q2 Handgrip
Here is a handgrip for the leica q2 that leaves everything underneath accessible, like the battery and sd card door. You don't have to remove it to access. Also included a ¼ 20 screw that fits in the tripod screw hole. I printed in 100%…
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
PrintablesBill
Panasonic Lumix GF3 Handgrip
This Panasonic Lumix GF3 Handgrip is a remix of the Panasonic Lumix LX100 handgrip by sixpm: https://www.thingiverse.com/thing:672444 The 1/4"-20 Camera Mount Screw design by tgizzel is used: https://www.thingiverse.com/thing:3343561 The…
- Downloads
- 29
- Likes
- 4
- Rating
- 0
P
Printablesangus beckett
human handgrip
the hole is 26mm in diameter, and the hand should fit most perfectly fits only the right hand for now. made from 3d scanned clay.
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
PrintablesArjan Knulst
Monofilament handgrip set and holder
Monofilaments (MFs) are used for sensory function testing of hands and feet in for instance diabetic or leprosy patients. MF test sets are well available and affordable in high resource contexts. However, in low resource contexts these…
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
PrintablesReed Bowman
Taig 5C draw bar handgrip
This is a handgrip to fit over the end of the drawbar of the Taig 5C microlathe, to make it easier to turn the lathe spindle by hand. When threading a deep hole using a tap, especially in a relatively large hole, it is both tedious and a…
- Downloads
- 20
- Likes
- 2
- Rating
- 0
P
PrintablesYuval Rashman
KETTLER HANDGRIP
I will recommend printing with PETG, I printed mine with 70% infill.
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesLadar
Peugeot 5008 2009-2017 handgrip for sliding loops in trunk
Peugeot 5008 2009-2017 handgrip for sliding loop in trunk. Print two parts and clik the parts to the sliding loop.
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesH3dSprint
Handgrip for french window
The handgrip is printed with PETG and do not need supports. To fix the handgrip, I recommend countersunk head screws for woodworking with a diameter of 4mm (core drill hole diameter: 3,5mm).
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
PrintablesLolman_16
French window handgrip
I couldn't find a French window handgrip which uses screws to mount it. I use the original screws. Uses two screws with a diameter of 3 mm. Supports: Yes Printer: Creality Ender 3 Infill: 20% Filament: Aurapol PLA White
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesBlackTelxon
Ariens Snow blower Heated Handgrip Switch Label
The Ariens snow blower heated handgrip kit has you install a new switch to turn the heated grips on and off, but includes no label for what the new switch does, so I created one. I left some extra space for the washer and / or rubber boot…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesMarc-Anthony
Chunky Pentax 67 Handgrip
God knows how many of us really like to firmly hold on to this beastly body. So, for those of you who share such pain, here is a chunky grip. While this should fit tightly, I'd still suggest securing it with a bolt. Oh, and be careful…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesSpaghettiFactory
Handgrip for mosquito screen.
Design can be adjusted to your needs. Fusion 360 files included!
- Downloads
- 8
- Likes
- 4
- Rating
- 3
P
PrintablesPrintedCoffee
Simple GoPro handgrip
A very simple GoPro Handgrip. You just need a M5 nut and possibly a lanyard.
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesMartin Nevim
M-LOK gun handgrip
Second handgrip for M-LOK gun pattern for better maneuverability. After printing "Main part" you need to uncover lower side, which allow you to get here bolt to tighten this part to gun. I recommend to drill hole into the “Main part”…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesCRop
thumbgrip + handgrip konica c35
📸 Konica C35 Handgrip + Thumb Grip ✨ Function: Provides a secure one-handed hold, reduces camera shake, and prevents hand fatigue while shooting. ⚙ Design: Perfectly fits the Konica C35 body. Mounts easily via the top hot shoe and bottom…
- Downloads
- 6
- Likes
- 0
- Rating
- 0