46 models
Update 09/23. the original STL and gcode fit the phone too loosly. the current files are a much better fit this is a 3 piece assembly. Body, “CameraRim” and “MagInsert”. The body is TPU, the other parts are PET-G. The Camera Rim provides…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
MakeyMcMakeFace published a simple and easy-to-print measuring spoon, this is the same but with a longer handle: one version is 10cm longer, the other is 20cm longer. The +10cm version needs a print bed which is at least 18x18 cm. The…
A close fitting case for the 14+. Tested with PLA @ 0.3 layer height and TPU with 0.2 layer height. Requires build plate support (for the handle version). The handle is offset from the back as the handle when placed flat to the back can…
If you have a Bambu Labs printer or use Makerworld \ Bambu Handy, see : https://makerworld.com/en/models/183699#profileId-202558 Wanted a holder for my hex drivers, hex nut drivers and files that didn't take up much tile space on my…
https://www.oxo.com/soft-handled-can-opener-433.html
I wanted a gear with a little handle that made it easier to spin. Goes together with a single 3Mx14 screw. The handle should free spin around the screw as long as you don't over-tighten it :)
I am pleased to share my ergonomic solution for the Shining3D EinStar scanner to you all. As always, I started with the project by making 2D sketches first. I then 3D printed the scanner model where I custom made a clay model. After…
Simple travel cap for a Merkur brand razor. Print upright, no support needed. Worked with a .08 nozzle. If retention horns are too tight around handle, swipe them with a file once until happy with the fit.
I’m sharing with you a model that I think is very pleasing. You can display this vase either in a corner of your home or in a prominent spot in your office. It’s both a decorative and functional piece. Note: I recommend printing it using…
Easy to print tray with handles. Tray can nest together when not in use.
Created an under-shelf mounted hook to hang a bag with handles. I'm using it with empty tool bags for storage. A screwdriver should fit through the holes in the hook part to screw in a screw to the mount part. The images I've uploaded are…
It's a holder for the Xiaomi Handled Vacuum to be able to fix the "connected" brush to a wall. I have attached it with two molly M4 (a little bit too much :D) The cleaner: https://www.mi.com/fr/mi-handheld-vacuum-cleaner/ Print Settings…
Version two, a more secure attachment to the Prusament PETG clamp from my previous design. Using a slightly modified clamp frame to clamp onto a boss and held in place by clamping force. The clamp screw gets assembled through the upper…
This is a hanger designed specifically for my hakko desoldering gun in its case, but could easily hold any other similar plastic case or really anything that you need a wide flat hanger for. I didn't see anything similar for the HSW…
This is my take on a design to hold tools like pliers and snips on an Ikea pegboard. I did use similar existing models before but I found the following issues in the model I used: It wasn't very hefty. There was just a single bar, so…
I was using a shallow plastic food spoon to fill desiccant holders with tiny beads of activated alumina when I began wishing for a small scoop to make the job quicker and less likely to spill. A coffee measure would help, but I wanted a…
After browsing dozens and printing several shaving stands, I still couldn't find one that met my needs. In the end, I designed this short, thin-walled, and fairly elegant stand to hold my (short-handled) Merkur 34C razor and a (standard…
A handle for a 6.3 mm Hex Shaft. Intended to assist with nozzle changes. Design considerations: Accept a standard 6.3 mm Hex Shaft. Use M3 bolts and nuts to secure shaft (likely in spares from printer build and mainenence). Large enough…
I made this for my wife who carries her phone in her purse. The handle allows her to get the phone out easily. It works well for getting the phone from a pocket and attaching it to a carabiner. Prints at 0.2 layer height in TPU with no…
A Canadian staple! You'll definitely need one of these if you are planning on driving in the Winter in Canada, or most Northern climates. I designed this scraper to be more robust than the store bought ones. I also tried to minimize…
Scale it to your desired size. At full size it is big enough to rest neatly in your hand but you may wish to scale it down. You may recognise the handle from the popular vintage tool planes and the edge to scrape the ice is set to 25…
This device is added to a long handled pruner to help hold the pruner steadily and more accurately whilst the user can close the jaws of the pruner more easily. The device slides up the pole. The string of the pruner is attached to the…
Eine Langstiel Heckenschere ist praktisch, aber sehr unpraktisch zu verstauen. Daher habe ich ein paar Variationen von Haken erstellt welche die Heckenschere stabil im Schuppen an der Deck befestigen. A long-handled hedge trimmer is…
Longue cuillère doseur à café de 19cm parfait pour les long pot.
The SHTI (Simple Handled Thermal Imager) found on Amazon HERE (not affiliated, I don't make money from this link) comes as a bare circuit board. I made a basic housing to protect it. It includes an optional lens guard that can be glued…
This is a simple cover for the long handled floor scraper sold at Harbor Freight. It just slips over the blade, it stays on pretty well, but I added small tabs on the side so you can loop a couple of rubber bands around the handle to make…
These are the drawers for the 3D Printer Spare Parts Cabinet with longer handles. This is also where the longer handles . The Main Spare Parts Cabinet: Bambu Theme can be found HERE. Rat Rig Theme can be found HERE. Army Theme can be…
Minimal position change of nozzle (only 1.8 mm loss in Y-direction). Requires printbed to be higher by approx. 3mm. Additional components for the hemera printhead: 12V E3D Hemera BLtouch1 or 3D touch (needs to be cut) Glas fiber mat High…
I bought a very basic thermal imager, and it's sold as just circuit boards assembled together. I made a housing for it so I wouldn't have to worry about damaging the device itself. The case halfs snaps into place. Optionally, you can…
Model for an Overclockers.com.au member. Fusion 360 model and STL just for lols Category: Parts
I made this simple pitcher with a large thick handle to help a family member with disabilities. This improved their grip. After a stroke, they are forced to use their non-dominant hand and this provides a thick handle to grip and pour…
Mounted to foldable table
handled allen key holder for bott square peg board link to tools pictured above (affiliate) https://amzn.to/4nVeTlj
This is a fixed version of the Moen 90274 valve stem extension for two handed tub and shower control. It does not have the stop for easy no support printing - I made this as a temporary fix until my part came in. You will also need to…
Scraper Tool A handled scraping tool with a hand-width contact edge. Rigid, so it does not compress and soften the input the way a soft tool does. TARGET AREA: IT band, calf, forearm SPECS - Size: 156 x 56 x 34 mm - Material: 123.1 cm3 -…
All images are renders and drawings. This design is digitally validated; it has not been physically printed or tested. A support-free printed foot for the tall 30/40 oz handled straw tumblers that are made to fit a car cup holder (a…
The SHTI (Simple Handled Thermal Imager) found on Amazon HERE (not affiliated, I don't make money from this link) comes as a bare circuit board. I made a basic housing to protect it. It includes an optional lens guard that can be glued…
Related Boxes https://www.printables.com/@brass_ring/collections/3088349 Heavy Duty Features: thicker box walls larger latch larger hinge protective fence around latch Print counts: 1 X Bottom 1 X Top 1 X Hinge Split Pin or 3 X Hinge…
I bought a very basic thermal imager, and it's sold as just circuit boards assembled together. I made a housing for it so I wouldn't have to worry about damaging the device itself. The case halfs snaps into place. Optionally, you can…
This is a fixed version of the Moen 90274 valve stem extension for two handed tub and shower control. It does not have the stop for easy no support printing - I made this as a temporary fix until my part came in. You will also need to…
This coffee scoop holds one dose of beans (16 grams in my case, YMMV depending on your beans). It has space for a small hidden magnet, so it can be attached to the side of your coffee machine when not in use. Inserting the magnet is…
Related Boxes https://www.printables.com/@brass_ring/collections/3088349 Heavy Duty Features: thicker box walls larger latch larger hinge protective fence around latch Print counts: 1 X Bottom 1 X Top 1 X Hinge Split Pin or 3 X Hinge…
A small stand to hold dish soap sponge with handles allowing drips to run into the sink.
Yet another coin based bottle opener. I'm using a U.S. penny (19mm diameter x 1.5mm thick). It is designed to print flat without supports I recommend 100% infill if you want it to last or maybe printing it in something stronger than PLA.…
