Counting matching models…
I was looking for small boxes to put accessories when using my Festool machines to don't have to always open the Systainer to take them Starting from a previous idea to hang my Mirka sander to its Systainer →…
The design includes two parts: the planter that would contain the plant and the soil with drainage holes at the bottom, and the cup that will hold the drained water which can be removed and emptied from water. The planter has holes on the…
This model is made to be printed with flexible material. I used TPU and it fit well the device. No support needed, just print it as it is oriented in the STL. Enjoy your ride and be safe!
Info: These holders contain of left, middle (optional) and right part . The system is adjusted for my solution, where I needed to hang it over my other construction (see photo) Middle part is universal (but i did not used it) Dimensions:…
I made a quick release and replacement for the rods for the model from Manzn. The quick lock can be attached with the holes that are present in the model without having to make any changes. For the assembly you only need 4x M3x8 hexagon…
A Hanged. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
「X」を回転させると、実は青い鳥が隠れています。@90度回転させると青い鳥と「X」が現れるモデルです。
My printer cabinet is missing a little depth for the new MK4. I have changed the angle of the LCD holder and reach 25mm more space. The MK4 stands on a stone plate, so it doesn't matter that the LCD now looks out down the printer.…
make sure to print it with some infill and enough wall layers for your need. For not too heavy work, 3 Walls and 15% infill worked good for me!
The thought is that screws are screwed in a wall, or a wall hanged plywood board, where the shell can then be hanged unto the screws in series so that the water can be pumped up to the top planter. I've tried and designed it so that it…
I made this greek vase like planter for on your wall, it should print fine without supports, but you can add them to the rings if you want them to look a bit nicer. The planter is printed in two parts, the planter and the holder, so it…
A fan fidget spinner that sits on the desk.
I'm unable to add individual parts of a model to a collection. So this is the next-best thing. Hope this saves you time from searching around. Words of wisdom before you tweak your printer: If you want to exchange the 'dwarf cover base'…
I was using TAPO C200 for a long time with my previous MK4S printer, so I wanted to continue using it, but it was too big to fit into the CORE One, so I did some changes to it. I got rid of all motors, speaker and leave just the important…
Simply changes to fit 30.5 FC+ESC, not tested yet
Removed the flange and attached to the top with 3M double sided tape. Works great and takes less space than on the sides.
A small organization pocket,hand it on the car door or on a drawer to have an easy access to small items
Print using same details as per original model
Gallipoli War is one of the most bloody war in the World History. There were millions of people killed. The Turks clashed against other several countries. One man , not the real commander of Turkish army, had made critical desicions and…
I changed the cutting plane of the single chain element, so the seams are covered by the next chain element.
The M5 and M6 holes were very tight when first printed, so I scaled the holder by 1% in all dimensions. This led to a great fit for the tips, plus a better tighter fit into the vertical rail. I found the small tips hard to grab as they…
Small change from this pretty design. Changed the hanging version into a pole-mount version. (13mm diam)
I ordered the wrong POGO connectors and didn't get them holes, modified the model to fit these connectors: https://nl.aliexpress.com/item/1005004407370088.html?spm=a2g0o.order_list.order_list_main.94.660d79d2kWXC9y&gatewayAdapt=glo2nld…
Various ornaments that can be hanged and given away
"Tires changed? Check the lights!" hint sign Within the last weeks I saw some cars in the complete dark in the morning driving on German Autobahn (highways) without any lights turned on the cars. It seems that this happens often in…
Display arm extended and angle adjusted by 7 degrees
**The Print Setting That Changed Everything for Me** Okay, confession time - I spent WAY too long printing with 0.2mm layer heights because that's what all the "getting started" guides recommended. I thought going thicker meant crappy…
**Finally cracked the first layer code - here's what worked for me!** Okay friends, I've been battling first layer demons for months and I think I've finally got this figured out. Thought I'd share the 5 things that completely turned my…
This is a modified model to truly fit a 2.5" wide vise jaw and increased in size to handle jaws 22mm high and other geometry to fit my clamp on Harbor Freight 2.5" spinning table vise. The original model was built to fit 58mm wide and…
When you have a bathroom closet there's always an unused volume, which is always the center top under every shelves. This modular hanged storage organizer will give you more space while mantaining order and ease of placing and picking up…
**Finally cracked the first layer code - here's what worked for me!** Okay friends, I've been battling first layer demons for months and I think I've finally got this figured out. Thought I'd share the 5 things that completely turned my…
**The Print Setting That Changed Everything for Me** Okay, confession time - I spent WAY too long printing with 0.2mm layer heights because that's what all the "getting started" guides recommended. I thought going thicker meant crappy…
Display arm extended and angle adjusted by 7 degrees
u will need a Bold with diameter 6mm to assemble this and use it to connect the 3 pieces.
For the Kirby Fume Extractor https://www.thingiverse.com/thing:4865478 a quick-print fan guard. Top and bottom layer to 0 layers, then adjust the infill as desired. have fun Für den Kirby Fume Extraktor…
Project: hanged again.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 216.72x317.54mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed…
Put a plant that is suitable for a paludarium. The roots need to be airated so always keep them halfway submersed.
An m&m dispenser designed for m&m only. I can create other ones if demanded.
changed puro Lego minifigure the head was made with AI then edited heavily the tail is from BlueDevXO's Puro slightly edited enjoy! Category: Construction Toys
Just a bigger box for my TT Print instructions Category: 3D Printer Accessories
Chaged Holes: 3030 side - M6 2020 side - M3
OBS! OBS! THIS IS A FIX OF THE FIX. I'm very sorry for the inconvenience. Found Stronghero's horse and wanted to print it. One thing that really bothered me was the position of the ears. I have often seen horses with their ears pointing…
The station is fit for the 2ear stock portafilter of the delonghi stilosa.
used to keep your vape or other stuff on your neck or hanged by your clothes
I printed the original model, but I had to ascertain that the batteries didn't “lock into" the charger, but barely touch the contacts. See photos. So I modified the model slightly so that the batteries have now 6mm more space to slide…
Got the idea from the Mostlighting's Spray can holder ( http://www.thingiverse.com/thing:1436529 ). I did not want to make holes on my wall or shelf for each holder, so I design a new one that can be hang. You just need to use hooks at…
This the first time I create an object in 3D. This was done with Shapr3D on iPad. You can put 2 Apple Watch on one stand that is hanging with double-sided tape (3M here, this is far enough). I did this object because I tried to find one…
Changed to 3mm stand off holes and extended length Category: 3D Printing
This wall hanged holder for bedplates, tools for printing etc is made to have it all nearby the printer. Easy to place nearby on leg on lack system or alike Print instructions placed 45 degress on bed it can be printed on mini and mini+
back left corner of https://www.printables.com/model/419586-glass-riser-for-bambu-lab-x1c modified
I love this model and thought of it when I created the battery holders. All models visible on the photo you can find in my collection. https://www.printables.com/@feri2303_813399/collections/1061160
Clambsize is now 20.1mmx20.1mm Shorter thongs to get over and dont block the LED-Stripe Move the longhole to match with the rail (but fits for me without srews) Printed on my Artillery SW X3 Pro Layerheight: 0.2 10% infill
Here is a link from the original account where I got the knife if anyone cares : https://www.printables.com/@YourSeriousD_1438847
![[changed] Wall mount for Parkside 20v charger (PLG 20 A1)](https://media.printables.com/media/prints/426475/images/3528046_93b59043-7ac3-4068-af87-d0fa79c41e5c/pxl_20230318_070548219.jpg)
