Counting matching models…
The insert consists of six segments, no support needed. Print settings: 0.20mm STRUCTUAL Filament: PETG 15% Grid infill Prusa Core One HF0.4 nozzle Segment time [h] filament [g] Segment_1_v3 07:20 170 Segment_2_v3 07:22 160 Segment_3_v3…
Use supports with 2mm x/y distance from the model so it will be easy to remove them or refer to attached .3mf file. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other…
DE 🇩🇪 „Diese 3D‑Chassis‑Modelle zeigen das finale Innenleben eines modularen R2‑D2‑Projekts. Sie dienen als Referenz, um ein bestehendes Hasbro-2002‑R2‑D2‑Modell mechanisch und elektronisch zu tunen (Elektronik, Sound, Licht, Bewegung –…
This model is something I made based on a lack of an existing “perfect” solution. I wanted to convert the crappy peg-on Spirit Halloween 80% wand to a printed V hook that doesn't easily break and can be later converted to use for a Hasbro…
This will work perfectly and exact on your hasbro proto starter launchers. Enjoy!
Just a couple things I modeled up to replace parts on my boys toy lightsabers. No supports required for anything, just print them with the flat base on the bed. The blade takes a litte bit to get it worked loose, but after that it's…
Set of grips for Hasbro starter launchers Easy to use and ready to install. You can choose from couple of different sizes . Find yours and get ready to fight! The starter launcher is supposed to easily click in. If you're having trouble…
This Project was made for a friend, and there the sizes seams to fit well. So here the disclaimer: I did not check the size for myself, please use the FreeCAD file if you need so! Here I give you an STL to repair a may broken slider from…
Hasbro's Battle Droid Blaster is one of the most accurate toy props they have ever released. That is not to say it doesn't have a few imperfections but this upgrade kit will help fix them! THIS IS NOT A FULL MODEL OF THE BLASTER. Just…
The insert consists of six segments, no support needed. Print settings: 0.20mm STRUCTUAL Filament: PETG 15% Grid infill Prusa Core One HF0.4 nozzle Segment time [h] filament [g] Segment_1_v3 07:20 170 Segment_2_v3 07:22 160 Segment_3_v3…
Need an easier way to take down your Beyblade stadium? These quick release locks have you covered! Simply insert and twist to lock in place. Features a raised and textured design for easy removal. Tested to fit the Hasbro stadium but may…
Use supports with 2mm x/y distance from the model so it will be easy to remove them or refer to attached .3mf file. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other…
DE 🇩🇪 „Diese 3D‑Chassis‑Modelle zeigen das finale Innenleben eines modularen R2‑D2‑Projekts. Sie dienen als Referenz, um ein bestehendes Hasbro-2002‑R2‑D2‑Modell mechanisch und elektronisch zu tunen (Elektronik, Sound, Licht, Bewegung –…
These are a friction fit, press in mod that requires no permanent modifications to your 1984 hasbro proton pack. They can be a tight fit, so use caution. These files were created using reference from…
My first 3d model, so it could certainly be improved. The original steering wheel's spokes formed a “T” with the top third of the wheel not having an spokes in it. Changed this to be more of an “X” shape to allow my toddler to turn the…
This is a replacement interior panel for the Ghostbusters Haslab Proton Pack. This panel includes a cut out for a Talentcell 3000mah Battery Pack: https://amzn.to/3HDwbBf Uses a USB cable mod from GBFans.com:…
This is a modification to the End Cap to allow you to use the CNLINKO LP-16 M16 Connector https://www.amazon.com/dp/B0816BMDKQ?ref_=cm_sw_r_apin_dp_Z64RTF47HAMNZWPDRRAZ I had another person make this for me based on the original design
UPDATE - 22 November 2020 Added a set of new caps for Aux Jack mods. There is a flat cap with Aux Jack. Additionally, there are caps with the 3/4" stub with just the jack, the jack + 2 circuit holes, and the jack + 4 circuit holes. There…
This is a replacement ice cube for the Hasbro “Don't Break The Ice” game (non-vintage model). It is a relatively straightforward print. Printing Orientation You can print this either face down or face up. You can print it face-up with…
Meine Tochter hat leider das Futter von der Katze verloren und ich habe dies anhand eines Fotos nachmachen können. Für alle Eltern die keinen 3D Drucker haben, ihr könnt euch gerne melden, ich Drucke euch das dann ;-) ich kenne das…
This massive stairs was printed on my Anycubic Chiron with 0.6mm Nozzle, 2 Walls and 8% Infill, without any supports but 30mm brim! Filament Use was about 400g. On the highest point it is 416mm high. To print the right side of the stairs,…
This is a reversible wand tip modification for the Hasbro Neutrona Wand. Simply press the printed part over the existing tip. The fit is very snug, so it shouldn't fly off during normal use. I've tested it on both the Spengler wand and…
Stand for the Star Wars Black Series Kylo Ren Lightsaber Force FX by Hasbro A hole in the bottom has been added to prevent the lightsaber to swing back and forth Printed using pla with 15-20% infill, no supports needed Height: 265 mm…
//* Nerf dart carrier uploaded, sorry I forget it Recently I bought a Tie Striker in a flea market without a wing. My son was so excited with it that I did a spare wing for replace the missing one. There is two versions: Ala.stl is the…
The '84 version of the Hasbro Neutrona Wand does not have a painted hat light on the main body like the Spengler version does. This is a simple cover that fits very snug, so no glue is needed. Just print and press on. I printed mine with…
While I liked the look of the stand that shipped with this prop, I found it pretty flimsy. I took measurements and copied of the parts I liked into a new Fusion 360 model. This print is much more stiff than the original stand and works…
