812 models
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. It means a lot, and us designers really appreciate it. Overlay tile replacement for the board…
[1/27/2026] – Update (v4) Increased top SMA pass-through diameter to allow full seating of the SMA nut (hex socket compatible) Added internal thread to the previously unthreaded corner through-hole [11/29/2025] – Update (v3) Widened SMA…
This Insert stores Frosthavens content in the original box without box lift and it is extremely optimized for fast setup. It is designed for the box with these dimensions: 16.14 x 11.81 x 9.84 inches or 41.0 x 30.0 x 25.0 cm The standard…
Premium versions of the models found here: landable and multi-color landable and Printables Store . This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 3 Tile Type: Difficult Print Settings Supports: No…
Multi-material/Multi-color version pictured above available on my Gumroad Store Yet Another Wooden Crate. This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 2 One version has a flat bottom for easier printing.…
A new organizer with little waste of material that actual fits everything. I really like the ideas behind some organizers that I saw at Thingy, but they use very thick walls and big filling blocks that add time and material in excess. So…
Multi-color/Multi-material and Flat-Top/Landable Treasure Chests available on my Gumroads Store and Printables Store . Overlay tile replacements for the board game Gloomhaven or any 28mm table top gaming. Tile Count: 6 Gold, 6 Silver Pick…
Table with chairs version is available on my Gumroads Store and on my Printables Club . This is a overlay tile replacement for the board game Gloomhaven. Table only model available here. Tile Count: 3 Print instructions Supports: No…
This is the PERFECT Gloomhaven / Frosthaven / Jaws of the Lion standee! You can print this and rush to show it off to your wife, which will undoubtedly raise an eyebrow at your excitement, in complete disbelief at how great your next…
Landable 2 and 3 hex versions for sale on my Gumroad Store and Printables Store . Overlay tile replacement for the board game Gloomhaven. Finally, players and monsters can now land on every hex of these boulders. No more worrying about…
You can fly/land on me! Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Note: I made these a while ago and never published them. I didn't love the way the models looked when rendered in thingiverse. I finally printed…
This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Print instructions Supports: No Resolution: 0.10mm Infill: 15% Encouragement If you like what I'm doing or use this in your game consider buying me a coffee…
Multi-material/Multi-color version pictured above available on my Gumroad Store Yet another Wooden Barrel, this one has rope! This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 3 One version has a flat bottom…
I remixed some playerdash boards for Gloomhaven found on thingiverse. For the supports I recommend to place custom a few lines and enable the bridge function in your slicers. (consult the pictures) Remixed from:…
Rock terrain for Gloomhaven board game. Tile Count: 6x (1 hex) Boulder 4x (2 hex) Large Boulders 4x (3 hex) Huge Boulders If you like what I'm doing consider buying me a coffee: Buy me a coffee Print instructions Supports: No
Rock Column terrain tile replacement for Gloomhaven board game. You can flip this on both sides for variation. Tile Count: 6x (1 hex) Rock Column Print instructions Encouragement: If you like what I'm doing consider buying me a coffee:…
!! You will find more for free / pay what you want in my ko-fi shop !! Ruined dungeon walls for the MagHex system for use in Gloomhaven and Frosthaven. Contains a 3x3 mm MagHex base. Prints well on .2 and even on .3 layer height.…
All I did was add holes in the bottom of Robagon 's and liquidlogic 's pillars for 6x3 magnets to use them in Xevin 's MagHex Gloomhaven Tile System (links below) but other magnetic systems will work too. It was an easy and fast edit on…
This is yet another bookcase overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Original non-commercial version here: https://www.thingiverse.com/thing:2758101 Print instructions Supports: No Resolution: 0.08mm Infill:…
Stalagmites tile overlay replacement for Gloomhaven board game. I was not having good luck printing other stalagmites when scaled to 28mm, so I made some that hopefully will work better. Tile Count: 6x (1 hex) Stalagmites Print…
Finally some prints of my own (12-08-23) I finally received my Prusa Mk4! I have the ability to rapid prototype a lot faster and have uploaded a new design with many small changes. The overall look hasn't changed but I'm getting good…
I made a quick remix of Robagon's excellent bush model because I wanted to have more points in the top layer so that models could stand on it more easily. So, I used the same tricks that I used when making the JotL Destruction tokens to…
This is my take on inserts for Gloomhaven: Jaws of the Lion Everything is stored in the box securely with the lid fully closing, but each tray can be taken out easily to decrease setup and take down time. The character decks are sleeved…
Tile overlay replacement for the board game Gloomhaven. Tile Count: 6 (you can always use some extra) Yet another Bear trap! This was just for fun. Note: Never stick your hand in a live bear trap! Print instructions Supports: No…
Update May5 2022 Added the XP and HP pin (heart) stl files from DocKuro 's post just in case people cant find them. Also fixed errors in the Character Board stl and the gcode files. I use Duramic PLA+ Filaments and they print very well…
This is the Living Bones model that I've been working on for the board game, Gloomhaven. I'm still fine tuning the model, but I think that it's gotten to the point where it's printable and so I want to show off my hard work! Speaking of…
Flying monsters or summons can land on crystal version 2.0 and 2.5, available on my Gumroads Store and my Printables Club . Overlay tile replacement for the board game Gloomhaven. Tile Count: 2 Print Settings Supports: No Resolution:…
Complete Barrel Pack can be found on my Gumroad store or in my Printables Club . It includes a higher detailed version of my original barrel, now with corded rope, and some multi-barrel models. Less than 10 percent of people who download…
Warning: The following may contain game spoilers. Read at your own peril. If you want to print off the initiative tokens, Recommend printing off the monster labels twice so you don't have to keep removing them from the box. Update…
This is a Rubble overlay tile replacement for the boardgames Gloomhaven & Frosthaven. It has small flat section on top for easy monster landing and like my other models no supports needed. In-Game Info Tile Name: Rubble Gloomhaven Tile…
Increased the length of the anti tipping brackets for better stability. This holds the attack deck for a gloomhaven monster, including the monster stat card. This is meant to be used together with thing 2810528 so that dice are no longer…
Doors! I've been working on this for a while, trying to come up with something that would keep a door in place nicely but would also leave room for all the models to stand in the door once removed. Same door fits both bottoms. Print door…
These boxes can be used to store everything that comes in the character envelope for a class (and, if you use the biggest one, even the character mini). This is a remix of jgrg1's character boxes on thingiverse . I've made a few changes,…
Overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Print instructions Supports: No Resolution: 0.10mm Infill: 15% Encouragement If you like what I'm doing or use this in your game consider buying me a coffee or sending…
Overlay tile replacement for the board game Gloomhaven. Two files are mirrors of each other for the two different colored tiles. Tile Count: 4 (4 yellow, 4 gray if you want to get technical) Print instructions Print Settings Supports:No…
I have been constantly getting lost when playing Gloomhaven so i decided to create a dashboard for players that would save some space on the table and help to organize your stuff. It lets you manage basicly everything you need during…
Overlay tile replacement for Gloomhaven board game. Tile Count: 2 Different version of shelf non-remix so I could drop the non-commercial license. Got rid of the "cabbage" ;) Original non-commercial version here:…
I'm using this remix for the Hound (or Wolf) monster in Gloomhaven. I scaled it, made some slight sculpt modifications and posed it. Thanks to Agademer for making one of the cooler wolves on Thingiverse! Category: Toy & Game Accessories
Overlay tile for the board game Gloomhaven. The large version is more like a full size wardrobe. The small version is probably closer to the correct size. Since obstacles do not block line of sight in the game I assumed they where below…
Trays to hold your Frosthaven enemies Together, these two trays hold all the standees for the normal and elite monsters that come with Frosthaven (https://cephalofair.com/pages/frosthaven). Each group of monsters has its own niche which…
My wife and I are getting ready to start Jaws of the Lion, but I realized that the first scenario (and a few thereafter) has a cool set of palisades that I had no overlay for... so I made one! I quickly flipped through the scenario book…
The edges are beveled so it isn't harsh on your cards. It is designed to fit cards with or without card sleeves.
Overview The model is meant for storage and organization of Frosthaven's overlay tiles. The organizer replaces one of the stock inserts that come in the box. The value of the organizer is that each set of overlay tiles is displayed in its…
This is a Nest with bones overlay tile replacement for the boardgames Gloomhaven & Frosthaven. It has a flat top for easy monster landing and like my other models no supports needed. In-Game Info Tile Name: Nest Gloomhaven Tile Count: 4…
Basic insert for Gloomhaven: Buttons & Bugs. Supports SleeveKings standard thickness sleeves I have thought for better token storage but nothing else that I could make work in the available space. There is about 2mm of lid lift (proof…
Thorns overlay tile replacement for Gloomhaven board game. This printed better than I thought it would but beware of stringing. Print instructions Supports: No Resolution: High
Gloomhaven: Jaws of the Lion Dashboard
Here's a nice fast one! I remixed MZ4250's Assassin NPC into a Bandit Guard for use in Gloomhaven! I changed around the hood and cloak a bit, giving him more of a bandanna instead of a scarf, and put appropriate weapons in his hands. This…
Stairs overlay tile for Gloomhaven board game. Rev1 has fewer stairs, Rev2 has more stairs and cracks, Rev3 has better brick definition and slightly larger scale. Tile Count: 4x (1 hex) Stairs Print instructions Supports: No Resolution:…
Multi-material/Multi-color version pictured above available on my Gumroad Store Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Square and Spiral versions with corresponding broken versions as well if you like you…
This is a miniature for the Gloomhaven Giant Viper monster. This is a bit on the large side, but I wanted to make sure that the scale pattern came through successfully. It doesn't entirely fit on my bases, so I'm printing a batch right…
Frosthaven included AoE abilities with complicated shapes that can be difficult to line up by eye. So I made these simple overlays that cover all non-trivially-shaped AoE abilities amongst three of the starter classes up to level 9. The…
!! You will find more for free / pay what you want in my ko-fi shop !! Modular boat scenery for Frosthaven. Split into front and rear. Will eventually be expanded with more assets to combine with the MagHex system. SIDE and WALL pieces…
UPDATE: Added V2 with material removed for less filament use, raised wall height to keep from seeing the color of the last card, and put a slope in bottom of the vertical car holder to keep them tipped back. Inspired by Gloomhaven Battle…
Dieser Leuchtturm ist eines der Wahrzeichen von Bremerhaven. Er steht auf der Nordmole der Geesteeinfahrt. Gebaut wurde der Leuchtturm in den Jahren 1912-14 und steht seit 2001 unter Denkmalschutz. Am Abend des 17. August 2022 brach das…
Updated and improved Single Color and Multimaterial/Multicolor version available on my Gumroad Store and my Printables Club . Flying monsters or summons can land on top of the water. Overlay tile replacement for the board game Gloomhaven.…
English. Are you tired of Gloomhaven's damage tokens creating chaos on your table? Solution to save and manage damage tokens easily. Español. ¿Harto de que las fichas de daño de Gloomhaven queden esparcidas y desordenadas por toda la…
Following along the path I started with the wood panel tiles , these are "flat" walls based off components from Devon Jones , in particular the bits from his ruined walls . Thanks so much Devon for providing all these bits! I'm modeling…
I remixed another of MZ's NPCs, this time to be the Gloomhaven City Guard. I did significantly less to this model than I did to the archer and so am a little hesitant to even bother posting it, but I decided to do so in case anyone wants…
I didnt like the bush models available so i decided to fix something myself. Really loved the tree model and used the tree canopy as my model for the bush. Printed with 0.4mm nozzle at 0.1mm layer height. Category: Games
These boxes can be used to store the components for Frosthaven classes. This page contains the character-specific files meant to be used with the base box here . For each box you will need to print 3 models: one of the…
After my first play through of this game I realized it was going to be a nightmare to pack everything away neatly in the same box. The insert I designed takes up about ⅔ of the box space. The original organizer has two small card storage…
This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Print instructions Supports: No Resolution: 0.15mm w/ 0.25mm Nozzle Infill: 10%-80% Notes: I put more infill in the spikes so hopefully they survive minis…
Here's my take on the Frosthaven summon (from the starting class, the Boneshaper), the Shambling Skeleton! I did my best to make this guy as printer-friendly as possible, but as you can see, it still needs some supports. That said, it's…
Flying monsters can land on me! More gas traps, ha!!!! Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Print instructions Supports: No Resolution: 0.01mm Infill: 15% Encouragement If you like what I'm doing consider…
Monster Standee replacement for Gloomhaven Board Game. Standee Count:6 Based off the artwork work of Alexandr Elichev . Works with number bases found here: https://www.thingiverse.com/thing:2872339 Print instructions Overhang threshold at…
This is rubble for the board game, Gloomhaven. I made the rubble with larger "chunks" so that it'd be easier to print and also made a very slight flat level on the top of the rubble, so that standees could more easily be placed on top of…
Here's my interpretation of the Frosthaven monster, the Algox Guard! The best image that I was able to find of the official artwork is incredibly low resolution, so I took some artistic liberties with this one. I decided that it would be…
!! You will find more add-ons for free / pay what you want in my ko-fi shop !! Wooden Walls for the MagHex system. Intended to use in Gloomhaven nd Frosthaven. Regular MagHex bases (3x3 mm magnets) are included. Prints well on .2 and even…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. It means a lot, and us designers really appreciate it. Premium version can be found on my…
This is an overlay tile replacement for the board game Gloomhaven. Three versions available: normal and distressed versions with and without rubble on top. Tile Count: 6 Print instructions Supports: No Resolution: 0.100mm Infill: 20%…
This is a small remix of mbunds's Doric-Style Pedestal scaled down, made more slender, and with a shorter base. The scale was chosen to match up roughly with other columns that have been uploaded on Thingiverse. Print Settings Printer…
I am fairly new to JOTL, but I liked UnclePats player dashboard so much (lightweight, easily fits into the games box (even two of them like in my case), easily to understand but still versatile layout, ...) so much that I tried to improve…
This is a boulder or rock. Designed for Gloomhaven
This is a new 3 Hex Gloomhaven Tree to replace the existing overlay tiles (3). Since my bushes worked well, I decided to try the same treatment on a tree, which was even harder to print. I've got it worked out pretty well (although it…
Description This is a storage solution for the Frosthaven monster ability decks, monster standees and monster initiative order tokens. It is made to fit sleeved cards. It does not include the generic ability decks for Priests, Scouts,…
Here's my proxy model for the Gloomhaven: Jaws of the Lion Chaos Demon! This model was a lot of fun to make and a lot of work! In the end, it's a crazy chaotic mess of spikes and tentacles... so I'm pretty happy with the result =) I…
Here's my take on the Zealot enemy from Gloomhaven: Jaws of the Lion! I'm actually pleasantly surprised by how this model turned out, as I was concerned that the pose was a bit boring, but now that I can see it in person, it's actually…
This is a model I made in TinkerCAD of the Haven-class medical station from Star Wars: The Clone Wars and Rebels. As-is, it is scaled to an approximate Star Wars: Armada sliding scale of 1:5000, and should be 155mm tall and 130mm across.…
Simple alignment clips for helping to hold the board tiles together, in case you have warped tiles. Works for both Frosthaven dungeon tiles and the Frosthaven campaign map as they have the same thickness (2mm) Hex aligner version is…
It's just a modification of rpgweb's excellent model. The changes are as follows: - snap joint replaced by friction joint - added fillets - change the position of the slots on the modifiers - slot walls have been reinforced and prolonged…
This is a remix of the cool Gloomhaven walls posted by rbross / paralepsis that span corner to corner hex lines. The original walls bridge between full hexes to make room for floor tiles nestling underneath. I am not using floor tiles,…
This Gloomhaven marker organizer holds all status condition markers (including Forgotten Circles “regenerate”) and all scenario relevant tokens, such as number and letter tokens. There's also enough room to store your element tokens. The…
This is a simple monster storage box that can fit the monsters standees, ability cards and stat sheets. The idea is to have the smallest box possible using the monster stat sheet as the lid. The box is optimised for 0.3 layer height or…
I loved the original version of this model by Endorriar . But I had a problem, I'm currently playing a Firbolg Warlock in a Strixhaven campaign. So not only was I only ever going to have 4 pact slots maximum that didn't care what level…
A remix of EmanG's Heathen Raiders I use as Bandit Guards in Gloomhaven and Frosthaven. Pre-supported for resin printing. Prints without base. I recommend using ABS-like resin for these models as their weapons tend to break easily if…
Here's my own spin on a character dashboard for Gloomhaven. My group uses app support to track health, conditions, etc. so they do not feature on the dashboard. This model was inspired by Hellfish's minimal dashboard but i started from…
Recently started playing Gloomhaven: Jaws of the Lion and wanted a better way to organize my player cards / tokens. Found SmashD's altered Player dashboard and decided to combined it into 1 piece using TinkerCAD. This way you don't need…
I was looking for some entry and exit tiles to print for our Gloomhaven sessions but couldn't find any. Therefore, I created them according to the designs in Jaws of the Lion, Gloomhaven, and Frosthaven rule books. These tiles fit the…
Monster standee replacement for the board game Gloomhaven. Standee Count: 6 This one took me a while but here you go, yet another spitting drake. Cover picture by liquidlogic Works with number bases found here:…
Hi everyone - here's my first Frosthaven model! I've always loved the Inox, so it's no surprise that I also love the Algox. So, here's my printable proxy model for the Algox Archer; maybe we can get these things all built out before the…
This is a revised version of a vertical stand for keeping track of element infusion levels for the board game Gloomhaven. Redditor Sledhead_91 had the great suggestion of obscuring the element when Inert, and partially obscuring it when…
This is the model that I've made for the Forest Imp ( http://www.cephalofair.com/wp-content/uploads/2015/09/Forest-Sprite.jpg ) monster from Gloomhaven. I had to get a bit creative with the model in order to make it "flying" so I expanded…
Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Print instructions Supports: No Resolution: 0.10mm Infill: 20% Encouragement If you like what I'm doing consider buying me a coffee or sending me a tip: Buy me a coffee
I was annoyed that Frosthaven uses the same overlay tile as different types of terrain so I made these little overlays to drop down to match the rulebook. It makes seeing terrain types easier at a glance. I designed them for a .4mm nozzle…
I remixed the original Ice Pillars made by jutsus to fit into MagHex tiles. Added a flat surface to allow figures to stand on them. I recommed printing upside down in vase mode, using transparent pla+.
A very simple non-destructive way of attaching status effect tokens to monster standees. Quick print, likely need ~20 or so. They can be used in multiple ways if space gets tight on the board.
Ice Pillar for Frosthaven, with flat top for jumping/flying monsters. I print this in clear PETG for that icy look, with 0.12mm resolution. If you print upside down (icicles pointing up), you shouldn't need supports, I've made all the…
In the original, venting didn't pass through into the interior, and one of the threaded holes wasn't threaded. I fixed these and made some other small improvements. If you'd like a STEP version, it's available on Etsy.
Here's my proxy model for the Gloomhaven: Jaws of the Lion enemy, the First of the Order! Since this is an older human with a big sword, I figure that it'd work quite well as a D&D figurine, especially if you're looking for some sort of…
![[REMIX] Stone Pillars for Gloomhaven with 6x3 magnet Holes for Maghex](https://media.printables.com/media/prints/191252/images/1793058_b3977f03-5ded-4370-ab38-6b3fc28d5ee3/img_2250.jpg)
