49 models
If you’d like to say thank you, you can always buy me a coffee: buymeacoffee.com/the4n8 German: Gedruckt habe ich die Halterung mit meinem Vyper mit weißem PLA. Es werden keine Stützstrukturen/Supports benötigt. Du brauchst meine Mounts,…
Simple torque wrench holder for a hazet 5122-2 CT and others. The inner diameter is 23mm. The holder has a deepening on the back to make the wrench fit better and lies flat. I printed my holder with 4 perimeters and a little support on…
Universeller Werkzeughalter für Hazet Lochwand.
A universal holder for the Hazet perforated wall. The holder has five holes for M4 screws. The holes are 20 mm apart. The middle hole is centrally located. Holder for mounting https://www.printables.com/de/@Boogie/collections/1423434…
Rugged box for your precious Hazet tools. Should work with every toolset that comes in the 165-S box, like most ¼" toolsets like 853 and 854.
Wallmount for HAZET Torquetool / Wandhalterung für Drehmomentschlüssel Parametric design
This is a remix by Altay Özsoy on Thingiverse . Added another slot for a nut and air tool and another 2 holes for wall mounting. My Print Settings: Rafts: NO Supports: NO Nozzle: 0.6 Resolution: 0.28 Infill: 25% Walls: 3 Material: Esun…
Simple wire brush holder for a Hazet 2131 wire brush and others. The inner diameter is 12mm. What you need: M2 T-Nut , M2 nuts and M2 12mm screws are needed for mounting. The holder uses the T-Nuts for Ikea Skadis Pegboards system from…
1/2 inch (12.5 mm) square ∙ hollow Impact socket set ∙ Outside hexagon traction profile Wrench sizes 17 ∙ 19 ∙ 21 mm Item number: 903SPC/3 If you have any questions or need anything else, please let me know. IF YOU PRINT IT, I WOULD…
This is a holder for the second nozzle that comes with the HAZET 2162M grease gun. If you, like me, don't know where to put it this comes in handy. The nozzle is secured by a tight fit that wraps around the thread by more than 180°.…
Prusa PLA 4 perimeters all around Adaptive Cubic filling Hazet tools link EAN 4000896232888
Holder for cables and pneumatic hoses for attachment to a Hazet tool trolley. Holder is symmetrical and can therefore be used on both sides of the trolley. For printing, only the support structure touching the build plate and for higher…
Just a simple holder for the Hazet grease gun 2162M. The Wera TX20x89 bit fits tight, if necessary use a >4.5mm drill to enlarge the hole. I hope you like it. My first construction with Fusion360. Printed in 4h on ELEGOO Neptune3 PRO with…
Spare part for the plastic bushing of the second floor of the Hazet Assistent 166 N tool trolley. Printed on a Formlabs Form 2. When installing, make sure that the sheet metal in which the bushing sits is not bent. Please comment your…
Skadis mount that fits the Hazet Bit Holder
Most of the universal pliers holders were too small for my Hazet pliers. So I designed this one. Uses #skadistnut for fixing.
Created this for my Hazet impact nut set, because the "box" it came with is trash.
Skadis Halter für die Hazet Fettpresse mit den T-Clip. Ihr könnt anhand der Maße schauen, ob diese Halterung für Fettpressen anderer Hersteller auch passen könnte. Skadis holder for the Hazet grease gun with the T-clip. You can use the…
Simple holder for the Hazet cordless screwdriver :)
Wandhalterung für die beiden Schraubendrehersets: HAZET 808/7 Torx Wera 2035/6 A
A wallmount for the HAZET Turbo (9040T-1) compressed air gun. The screw hole is tapered for a 3.5mm TX20 Spax countersunk screw. Sucessfully printed in 0.16mm in PLA and PC Blend.
A simple wall holder for the Hazet 5108-3CT torque wrench. No support is needed.
Kleiner Standfuß für Hazet Fettpresse und vergleichbare Fettpressen. Material : Jayo PLA schwarz matt Schichthöhe: 0,25mm Druck Termeratur: 195 Grad --------------------------------------- Small stand for Hazet grease gun and comparable…
Wandhalterung für einen kleinen Akkuschrauber - könnte auch für Bosch IXO und ähnliche passen
I made this box to replace the original Hazet boxes as they keep breaking at the latch and hinges. This is a toolset that is used by every technician in my field and most have broken with normal use. I made this box able to withstand…
i printed it in Prusa PETG with the following settings: 0,2mm layerhight 3 walls 50% infill (min. 30% needed) brim (optional, if needed) do not overtighten in the grease gun
use this stand if you want your Hazet Maintenance Unit mobile and not fixed to a wall. You will need 6 M6 bolts, washers and nuts as shown in the pictures and you have to mirror the strebelinks model if you don't use the presliced files.
A holder for the second nozzle you get with a Hazet 2162M Grease Gun. Without this you might end up loosing it
The original injection mold broke due to the age. Printable in one go on the XL in upright position.
EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…
15% infill is sufficient, it is still super stable
Hello, while browsing Printables and searching for a holder for the slightly oversizet Hazet 810R-1 Bit-Driver i got inspired by Erntekoenigs Wera Screwdriver holder. So i designed it from scratch to fit the Hazet Handle. I adopted the…
Wandhalterung für die HAZET Smartholder Bithalter
Fits the Aircraft NE Mini Pro / Hazet 9035M-5 needle scalers. The Hazet is the same unit, just rebranded. Not to be confused with the 9035M-6! If you installed a different fitting, it might need modification to accomodate that.
I took inspiration from https://www.printables.com/model/247627-wall-holder-for-7-piece-hazet-hex-key-t-grip which works fine for the hex-keys but does not fit the matching Torx set, with it's different handles and key sizes / diameters I…
Spare lever for a hazet 9040-4 air gun. Center hole with D2.5mm. Drill it up to 3mm if you want to use the original bolt or use a tap to cut a M3 for a screw.
Non stackable 4x2 Gridfinity toolholder for Hazet ratchet and bitholder with additional space for small stuff.
I printed this mount in PETG to give it more flex. Mounts with only one screw easy to print, no supports.
I wanted a shadow board for my Hazet screwdriver set that’s compatible with Gridfinity. I designed it using ToolTrace, since I found the process really interesting and wanted to give it a try. This version is 4×4 in Gridfinity size and…
Holder for small greasegun. For mounting with 5mm rivets. You need a long head of your rivet plier.
Inlay for an old Hazet 854 set of ratchets. Fits more, and longer bits, than the original. Einsatz für einen alten Hazet 854-Ratschensatz. Bietet Platz für mehr und längere Bits als das Original.
Inlay for an old Hazet set of ratchets. Einsatz für einen alten Hazet Rätschensatz.
Since I designed one for the Torx keys, I did another matching one for the hex key set as well. I'm still quite happy with the precise fit. \_(ツ)_/ Printed it in PLA .4 nozzle - .2mm layers - 3 perimeters - 15% infill
Ersatz für das orginale Inlay für die Metallkiste von Hazet 2191/12 K Bördelgerät . Zweiteilig um es auch auf kleinen Druckern fertigen zu können. Alle Modelle von Klinger-Engineering.eu werden als STEP Modell zur einfachen Anpassung und…
Inlay for a Hazet combination wrench set in a 165-L SmartCase. Mounts on a custom-fitted wooden panel inside the SmartCase. Fits the following sizes: 6–13 mm (small) and 14–27 mm (large). Einsatz für einen Hazet-Ringmaulschlüsselsatz in…
Spare lever for a hazet 9040-4 air gun. Center hole with D2.5mm. Drill it up to 3mm if you want to use the original bolt or use a tap to cut a M3 for a screw.
I wanted a shadow board for my Hazet screwdriver set that’s compatible with Gridfinity. I designed it using ToolTrace, since I found the process really interesting and wanted to give it a try. This version is 4×4 in Gridfinity size and…
Ersatz für das orginale Inlay für die Metallkiste von Hazet 2191/12 K Bördelgerät . Zweiteilig um es auch auf kleinen Druckern fertigen zu können. Alle Modelle von Klinger-Engineering.eu werden als STEP Modell zur einfachen Anpassung und…
