Counting matching models…
Simple wall mount to hang a FTX Tracer RC Car on the wall. Printed in PLA at a 0.28 layer height with 20% gyroid infill Should be compatible with the HBX 16889 RC Car as it is very similar. Potential for compatibility with other 1/16th RC…
You can find the BAHA BUG body here . You do not need to scale it up the 1/18 scale fits as in the pictures. I used 10lb velcro and you need to use it sparingly as it is quite strong. Body: Here Buy me a coffee:…
Update 20-02-2022 - now a variant with a stronger foot, as the first design was a little fragile Designed this battery tray, which replaces the existing servo mount. This allows for bigger Lipos to be installed, above the servo. (This…
The original part has broken twice for me now over two different cars. The only part to fail other than the wing, but the PETG replacement holds up well. Replace the original by unscrewing it, this is easier if you remove the two screws…
This is a Battery adapter for HBX 16889 RC Car for batteries up to 2A (35x72mm). Printed in PLA (other material might be better suited), 0.3 layer, 15% infill. Remove the Velcro strap from the car, attach the adapter with cable binders…
I designed a cover so that I don't have to remove small stones and dust from my RC car every time. This should help the electronics and mechanics last longer. This cover fits to Blackzon Slyder and should also fit all cars built on the…
This bracket allows for mounting standard LED signals to the MNNTHBX rear fender eliminator [ MNNTHBX ] for the Honda Navi. In this example, I used these universal motorcycle LED signals from VRWEARE [ Amazon ], and these mounted up…
HBX 2997A ESC relocation plate. This sits on top of the three-arm servo retainer. This will provide you a more positive
Simple replacement for the front bumper part. You can use the Fusion 360 file to increase the wall thickness Haiboxing and similar Manufactors should work.
I present my HBX 2997a TPU battery tray. You will need to relocate your ESC (usually what we all do first anyways). If you have moved it and want a more stable platform on top of your steering servo or have not moved it yet and want the…
Print on its side for strength, supports will be needed. Go for a shock-resistant filament like PETG and up the wall count. Made for Eachine EC30 but to the best of my knowledge, it will also fit HBX 16889 shocks. Matching shock foot can…
Front support arm for hbx stealth x09
Carrying arm
Recommended print settings PETG Nozzle: 0.4 Layers: 0.15 Infill: between 100% Perimeters: 3 Bottom/Top Layers: 5 SUPPORTS NEEDED Like the design? Please leave a “like” …. ❤ ….. Feel free to follow me …. ✅ ….. I am glad about every make…
My Son is a lefty, and wished that there was a left handed transmitter for his RC basher (that wasn't hundreds of dollars), so here it is! Original steering will mount just as it does on the original side. Printed in PETG with supports.…
Remixed Rear Wing by StreelyDan for the Haiboxing 16890a to have appropriate geometry for attaching this wing to the Haiboxing 16890a chassis.
I fixed the listing error from the original creator. The original creator said it was 18t but it's actually 16t.
If you prefer the minimalist look of removing the bodyshell but still want protection for the electrics, then this is the make for you. Print the main roof upside down so no supports are needed. Use the original screws, they are long…
Pls like and support both of us!
The HBX Devastator 2098b is a 1/24th scale micro sized rc crawler. The stock steering link arm bows downwards which means it is usually the first thing to contact an obstacle, sometimes causing the crawler to get hung up on it. I designed…
Part 3378-T004 Steering Bushing Kit -B and Steering Bush set A
I made this It looks like the original rim
6538-P001 HBX BATTERY HOLDER, COVER RETAINER POSTS
Nothing fancy here! Just a blank to fill the hole of the original ESC power button for HBX / Eachine RCs. Modelled from the original power button.
This is a simple stand designed to prevent the wheels from becoming flat over time. It should fit all RC cars that use the same platform as the HBX 16889. The model can be printed without any supports in 0,2 or 0,25 layer height.
i made it here it looks like the original front bumper hbx stealth x09
bumper for hbx stealth x09
Similar to my other model, I created a dust cover for the HBX 16890 to protect it from coarse dirt. Since I don’t know how the motor’s heat dissipation will perform over time, this may not be the final version. You will need an M4x16 or…
HOLDER for SERVO HBX
Bumper fits the original mounts The rollcage only fits together with my rear shock tower ( https://www.printables.com/model/1689560-flyhal-fc610-hbx-2996-rear-shocktower) I recommend printing everything in TPU 95A, except for the…
Replacement rear shocktower for Flyhal FC610 / HBX 2996a, Much beefier than the original one. I recommend to use TPU 95A for this print. Hold's up very nicely in my car.
Replacement rear shocktower for Flyhal FC610 / HBX 2996a, Much beefier than the original one. I recommend to use TPU 95A for this print. Hold's up very nicely in my car.
Bumper fits the original mounts The rollcage only fits together with my rear shock tower ( https://www.printables.com/model/1689560-flyhal-fc610-hbx-2996-rear-shocktower) I recommend printing everything in TPU 95A, except for the…
Remixed Rear Wing by StreelyDan for the Haiboxing 16890a to have appropriate geometry for attaching this wing to the Haiboxing 16890a chassis.
Prints in two pieces. The lower piece can be held in with a zip tie, and has room to use the original velcro strap to connect the battery. Designed for a 75mmx34mm battery (2200mAh 2S), but can hold up to 88mm and maybe more with some…
I couldn't find anything for tires for 1/18th scale RC cars so I took a picture and rendered a 3d model off the orginal tires. Do with them what you please, if you modify them just share it for everyone if you can. I like to see what…
may be 4mm not 5mm but it still works fine on the HBX 18858 for me print with 100% infill PETG recommended PLA works fine
I recently broke a steering link (or whatever it's called) on my HBX 18859E Rampage. I love this litthe RC car, but I think the spare parts are way too expensive. That's why I made this one in Fusion 360. Please see my review on this very…
The shock shaft came loose on my kid rc, so we lost the lower spring seat the the spring. 20 minutes later, I found the spring and after another 10 minutes I lost hope for the spring seat. There was no way I was going back to friction…
