Counting matching models…
I noticed there was a lack of holders for Cosplay helmets, that had an adjustable angle. So I made this simple holder thats intended to be universal, and has a pad so it doesn't wreck the inside of your helmet. It's not intended to hold a…
When I imported this hat it was asymmetrical and a little racked, so I split it in half and mirrored it. So there are two different versions of this hat. They are functionally the same, but the antler configuration is slightly different.…
use screws that are 4mm in thread diameter
Stand for F1 helmets scale 1:2, to put helmets on display. The big one is 21,5 cm high and 8 cm wide. The small one is 15 cm high and 8 cm wide. It can be printed as one (need supports) or in two parts (no supports needed and suitable for…
With permission from ToyMakr3D and Printformers to remix and share for non-commercial purposes, I present my Transformers Cosplay Helmets and masks! These were created using The Helmetizer model I made to use as a negative volume in Prusa…
NEW UPDATED VERSION – ARTORIAS SWORD (FREE UPDATE) – Completely redesigned pegs and sockets – Sockets are slightly larger than pegs to ensure perfect fit even if a printer produces oversized pegs – Simpler, stronger peg design for better…
Français Pack de 3 socles différents pour l’ AKASO V50 Elite , modélisés à partir de ma maquette 3D (le dummy que j’ai uploadé avant). Tout est conçu pour être solide, léger et hyper pratique. Les 3 versions : 1. Socle classique → pose…
I've printed so many Lego heads and helmets that I need a stand to hold them while I paint them. The posts are undersized on purpose. The neck posts are more snug than the helmets posts. They work for me. Just thought I'd share if anyone…
A simple Marshmello helmet that fits over a standard MINI 13 head. The Deadmau5 head fits over a standard MINI 13 head, but will require the eyes and mouth to be glued. Printed at a speed of 50 mm/s with a layer height of 0.12 mm
The Supertrooper/Boba Fett helmet was modelled in clay by Jan(et) Stevens using drawings made by Norman Reynolds (who did them from concept arts by Ralph McQuarrie and Joe Johnston), then the model was molded and cast in fiberglass. The…
Stand for F1 helmets scale 1:2, to put helmets on display. The big one is 21,5 cm high and 8 cm wide. The small one is 15 cm high and 8 cm wide. It can be printed as one (need supports) or in two parts (no supports needed and suitable for…
On lopes in germany and austria a FFP2 mask must be worn. I realised, that after a few hours of skiing, my ears started to hurt because of that mask. So I decided to create a little attachment for my ski helmet that can hold the FFP2 mask…
A small mount, to attach your covid mask to your bike or ski helmet, just for a short stop, when you need the mask to enter a shop or public building.
Here is my unfinished collection of Low Poly Star Wars helmets from 2013. Whats interesting is that they all have many subtle differences. Hopefully there is something in here worthy of modifying. Let me know if there is one in particular…
Football Helmet Cookie Cutter Post-Printing Trim or sand to fit. How I Designed This TinkerCad Category: 3D Printing
Nothing more to say except same settings as original…0.2mm, 25% or more infill, 3 or more perimeters. Printed with Polylite PLA. I used #8 wood screws with wall anchors to secure this to my stucco walls.
Little base for Miniature Sports Helmets, takes around 4-5 hours to print, use supports for under hangs, printed in black PLA
Scale it up to 1000% or 10 times. I made it for a relative and don't have a photo of the make.
Keep Your Gear Powered When It Matters Most Never get caught in the dark! Our Tactical CR123A Battery Holder is designed to securely store an extra battery on your helmet, ensuring your night vision and essential gear stay powered in the…
I picked these up last year, and they have been great! But really difficult to mount to these helmets. I came up with this. Its not the prettiest, but it does work well. If you happen to modify these and make them better, please let me…
A quick tool I made the other day to help make those bubble-style helmets popular in retro science fiction and the Jetsons. The intended use is as follows: Spray or brush both halves of the mold with your preferred mold release agent Fit…
I made dummy 13 heads to match the clone troopers various helmets. I want to recreate a dummy 13 version of all the 1:1 scale helmets I've made over the years. (in order left to right its Commander Jet, an OC of mine Sergeant Scab, a…
This is a copy of a Gopro mount from (tmorris9) file credit goes to them!!!!! Gopro mount was a flat file on his page https://www.printables.com/model/96691-gopro-tripod-mount The only thing I did was add a curve for mounting on a helmet…
Matches this male portion: https://elementrimming.com/products/itw-nexus-16mm-5-8-pom-helmet-side-release-buckle-a9hsb-1 Works for Giro Tremor helmets (and others) Printed in PETG with supports
Step 1 Print Step 2 Remove From Yo Printers Bed Step 3 Remove Ugly Ahh Supports Step 4 apply heat to yo 3M VHB adhesive mounting tape (3M works the best) Step 5 apply tape to yo print Step 6 apply heat to the opposite side of yo tape Step…
This is a remix of a fantastic FFP2 mask mount for ski helmets , providing two versions and easing the print (no supports needed). There are two versions: One for straps up to ~16 mm (usual straps are 15 mm) and one for straps up to 21 mm…
Please measure your belt first if it fits 16mm x 1mm (a little more or less works fine as well. If it's thinner, then it doesn't hold perfectly, but still works) What is this? Due to covid you need to wear masks on ski lifts depending on…
With permission from ToyMakr3D and Printformers to remix and share for non-commercial purposes, I present my Transformers Cosplay Helmets and masks! These were created using The Helmetizer model I made to use as a negative volume in Prusa…
Mio MiVue MP30 with original mount piece remains horizontally tilted level when mounted to some helmets (SHARK GT EVO, LS2 FF906 ADVANT etc.). This tilt cannot be reduced by original mount plate. This additional mountpiece eliminates this…
I managed to break this splint screw of my Optrel Panoramaxx Quattro welding helmet, so I made these two 3D models as quick replacement parts. Without this part, the helmet is unusable. You can also order the splint screw as official…
Added some support to the original model because mine fall down after time.
Daft Punk TB3 and GM08 helmet to be printed in one piece Each Below are the printing parameters. Thanks for stopping by :) No comercial use. Personal use ONLY Link to Patreon :) patreon.com/Artoys3dPrint Casco de TB3 y GM08 de Daft Punk a…
Hello, Today I have for you an Action Camera Holder for FAST/FMA/MICH helmets . A great way to attach the camera to the helmet and then easily remove it. The holder fits perfectly into both helmets and camera holders. Be careful when…
All parts are pressure/friction fit like legos. Should be strong enough for helmets and Boosted Board remote. Remote clip was designed and optimized for Boosted Board remotes, other remotes might fit. Customize * (Download OpenSCAD if you…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Some LEGO compatible heads and helmets for star wars characters.
NEW UPDATED VERSION – ARTORIAS SWORD (FREE UPDATE) – Completely redesigned pegs and sockets – Sockets are slightly larger than pegs to ensure perfect fit even if a printer produces oversized pegs – Simpler, stronger peg design for better…
This wall-mounted Helmet Holder is a strong and practical hook designed to securely hold bike helmets, caps, bags, jackets, headphones, or other accessories. The rounded head design prevents straps from slipping, while the angled mount…
Does the call of Bushido cry out to your squad? Check out our Cyber Samurai V10 Primaris Samurai Style Helmets. This pack comes with four different helmets that will work with Primaris-sized marine miniatures. The helmet design is based…
This is a digital STL file – print-ready and high quality. “Helm of Artorias the Abysswalker, one of Gwyn’s four knights. The death of the helm's owner can be surmised from the corrosive Dark of the Abyss, and the musty azure-blue tassel,…
Français Pack de 3 socles différents pour l’ AKASO V50 Elite , modélisés à partir de ma maquette 3D (le dummy que j’ai uploadé avant). Tout est conçu pour être solide, léger et hyper pratique. Les 3 versions : 1. Socle classique → pose…
Bring a galactic mercenary vibe to your shelf with this helmet trophy stand trilogy . Each version is designed with FDM printing in mind : bold shapes, readable panel lines, and a stable base so it displays clean in plain PLA. Included (3…
I've printed so many Lego heads and helmets that I need a stand to hold them while I paint them. The posts are undersized on purpose. The neck posts are more snug than the helmets posts. They work for me. Just thought I'd share if anyone…
these lenses fog up during colder months, but work great in warmer weather. i dont like glasses. and i can pop them off during a ride to blow my nose. only downside is that you cant flip them complete around to rest them on the helmet. i…
I wanted a custom look to display the newly released Lewis Hamilton and Charles Leclerc F1 Helmets. Looking forward to getting the next round of releases from Lego soon. The MegaFigure is 17" tall when completed. I will have some stickers…
Layer Works mini helmet display is the best case out there (the helmets are very visible when mounted, as opposed to the cases with cubby holes that the helmets sit in). I just wanted these cases to have the League and the division at the…
this is a gopro mount for mtb or motorcycle helmets. print in pla or stronger material if its no curve on the helmet if ,print it in tpu or other flexible plastics
Low Poly Horns for Caps, Hats and Helmets Give your headwear a bold and unique appearance with these Low Poly Horns . Featuring a modern geometric design with sharp polygonal surfaces, they are perfect for cosplay, festivals, Halloween,…
Gift box for Daft Punk`s helmets: Guy-Manuel's Daft Punk Helmet by andyways - Thingiverse Thomas Bangalter's Daft Punk Helmet by andyways - Thingiverse
It's a shadowbox display case for miniature baseball helmets. Print instructions Download. Slice. Print. Summary Helmet display stand. Print two (one for each League) to house and entire collection of MLB teams' helmets. How I Designed…
Here are models of Tenma Helmets from TV series Gosei Sentai Dairanger. Print instructions Category: 3D Printer Accessories
Here are many helmets. Print instructions Category: 3D Printing
Hi Phillip, I have these options for you. Please check the sizing suits your needs and post some pics if you do take on the build ; ) Cheers Jace
Here are a couple of Helmets from theHelgate Game, Cheers Jace ;)
Rumaged through my saved Pepakura folders and was once again inspired by Killonious great work on his helmets. Please note these files were freely uploaded to the internet via Pepakura.com. I can not take credit for these models, only the…
I finally took the time to tidy up my Predator file data base all of which were .PDO's that I have been collecting over the past several years. Unfortunately I cant give credit to the original designers because I no longer have access to…
Thanks again to DrMckay for bringing these cool models to my attention. There is a lot of work to be done to bring them up to a visual standard, but I thought there maybe one helmet in here that would capture some one's attention for…
Found these really cool Halo helmets created by Tony over at the 3DWarehouse. https://3dwarehouse.sketchup.com/model.html?id=4fe36c00609c4f29f64801ad2940cdd5 Will need some work to tidy up some of the mesh errors but very cool all the…
This is a design for an LED illuminated pedestal I created to display Lego helmet kits. Lego has created a number of these as can be seen here: https://www.lego.com/en-us/search?q=helmet I currently own the Batman's cowl and Iron Man…
Standard hook for hanging of bike helmets, cycling caps, but also whatever else you want to attach to it. This is a remix of a design found on a different platform: https://www.thingiverse.com/thing:3441154 It is smaller, as for my…
Use the stronger v4 as v3 might break. Use a flat-head screwdriver for installation. Holder/adapter for a Peli 3310 for fire department helmets Developed with a MK2.5 Be careful when inserting flashlight, use images Print instructions…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Building off of what c.dunjr designed. I took his stand and removed some material and added a Lego plate to the bottom so that they can be stacked. I have included stands from 80mm to 30mm in 10mm increments. This stand fits models that…
A simple Marshmello helmet that fits over a standard MINI 13 head. The Deadmau5 head fits over a standard MINI 13 head, but will require the eyes and mouth to be glued. Printed at a speed of 50 mm/s with a layer height of 0.12 mm
A simple chin mount I have done using Fusion 360. - I have added the project files if you want to modify the piece to your liking! 🙂 Slicing tip: Place the support upright and use supports for the hooks. - To install this mount you ll…
Rumaged through my saved Pepakura folders and was once again inspired by Killonious great work on his helmets. Please note these files were freely uploaded to the internet via Pepakura.com. I can not take credit for these models, only the…
A collection of helmet helmets and Cospenis items used on my Reddit account u/nightswordsman and in the r/cospenis sub. The Kang model needs the arms heating up and moulding into a more natural curved shape. Some of the others are from…
I purchased two Hockey CCM Helmets in a end-off-life offer, but actually, the Full Face Visors I have are from Bauer. The holes for the clips in the CCM helmet are 11mm wider than in Bauer helmet and I designed this clip variant to avoid…
Strap around the back of the head for a head-size pull-down system.
I created a Wall / Skadis mount incl mounting aid for all Helmets of the LEGO® Star Wars™ Helmets Collection. the aid is perfect for aligning 2 holders to fit the helmets at a distance that suits me. no more measuring, all you need is a…
Introducing my first, single plate, HueForge model. A must have for all Star Wars fans. I have been playing around with the latest version on HueForge and really like the new features, especially the "color pop" feature. This feature…
Print Nozzle Size: 0,4 mm Layer Height: 0,2 mm (speed) Brim: Optional (I used one for better bed adhesion) Infill: 25% Material: PLA Screws: Countersunk Here I used Add:North's Black E-PLA for a slightly matte black
Držák na helmy a jiné pod polici.
These are three pillars to display various helmets or heads from Power Rangers Lightning Collection, Star Wars the Black Series or Marvel Legends. I added three heights. 80mm, 60mm and 40mm.
I made this basic stand to put a height difference between different lego helmets. I recommend printing upside down (Square part on the bottom) and adding supports. Printer: Creality Ender 3 V3 SE Quality: 0.2 mm Supports: Yes, Grid…
Diamond, Iron, and Gold helmets from Minecraft.
Elevate your Black Panther helmet display with the Black Panther Helmet Stand . Designed specifically for the Hasbro Black Panther Electronic Helmet, this stand is versatile enough to support any life-sized helmet, making it a must-have…
HAD HELMETS ALL OVER THE HOUSE SO I MADE THIS TO DISPLAY THEM ALL
Quickly convert your flashlight into a headlamp or mount it to your helmet. All you will need is two zipties and possibly some double sided tape. I suggest using a quality double sided tape like 3M's VHB and UV resistant zipties. If you…
