Counting matching models…
Hifiman HE Stand for Arya, HE1000, and Jade series headphones. This model works best when the larger Dekoni pads are installed, as the original pads are slightly thinner.
I reccomend that you print this out of PETG and also salvage and stick the original dust protective mesh onto the back of this one to protect your headphones driver.
Ear pad mounting ring for Hifiman headphones. The model fits similarly to the original. The design is slightly different to the original due to the differences in material properties. This model is meant to be printed with PLA. Update:…
A headphone cradle for the Hifiman Sundara. Inspired by the Hifiman Shangrila Headphone Stand.
This is a headband model I made for my Hifiman Anandas, it should work for the Sundara as well and all Hifiman headphones with the same type of Head-strap contraption. You do have to do some disassembly to install it but that should be…
Based on Tiddley earpads bracket, closed the holes, this bracket is made and recommend to use with Tiddley Fazors but they are optional (use double side tape on the magnets holder not on the magnets). Boost sub bass, bass and reduce a…
Hello, Custom yokes for the Hifiman Edition XS if you want to mod you headband. Might require some extra tuning after print for the screw holes of headband connection. Uploaded are two versions. -Ver 1 is without extra material and might…
A small mounting surface to mount your modmic to your pair of Sundaras. Bonuses Allows avoiding mounting directly to the headphone cups. Allows the mic to swivel slightly left and right. Hardware 2 x M3 16mm flathead screws (I used…
Volcano Grill for HiFiMan HE-500, HE6 etc. for more open sound stage. Does fit the original retention ring without issues. Prints without supports.
This is a remix of lionpants' original modmic mount, but adjusted for M3 10mm cap head screws Changes to Outer 4mm counterbore for M3 10mm cap head screw Changes to Inner 4mm captured nut (extended from 2.4mm) for M3 nylock nut as opposed…
Simple dust covers for HE400se headphones. If you have any furry friends (dogs, cats etc.) in your home this is a must have. Material/Temperature TPU @ 235 °C Nozzle 0.4 mm Layer Hight 0.2 mm Top/Bottom Layers 4/4 Speeds…
I wanted to print a headphone stand for my Hifiman Deva Pro Wireless, but there doesn't seem to be any models made particularly for it. So I turned to generic headphone stand designs, with my two requirements being (1) the headphones must…
I wanted to create a printable version of the included foam stand that Hifiman provides with their egg-shaped headphones. I traced the original foam and created a 3D model, added a little hanger for the headphone cable. Print settings:…
Pentagram Grille Mod for Hifiman HE6SEv2 Headphones Introduction Hifiman HE6SE v2 headphones, as well as other Hifiman HE-series headphones that share the earcup design (at least HE400), benefit from the “grill mod”, i.e., either removing…
Headphone holder for Hifiman Arya Stealth. Will also work with many other headphones as well. I used eSUN PLA+ with 40% infill. No supports. No raft.
Not as nice looking as the originals that shattered (on there own!) but they work great. Supports: Yes Resolution: 0.2 Infill: 100% Notes: I used supports just for the connecting end but depending on your printer / experience you might…
Simple printable adapter ring for Hifiman HE4xx (HE400se, HE400i, HE400S) that allows mounting standard round earpads (e.g. 100–110 mm aftermarket pads like Dekoni, Brainwavz, Yaxi, etc.). Replaces stock mounting system → easier pad…
After recently purchasing a set of used Hifiman HE560 headphones, I found that after a while the inside of the drivers was pushing on the outside of my ears. A simple solution is to add a little space between the driver and pad, which is…
Helps hold the 3.5mm cable for any Hifiman Arya's with loose connectionsHelps hold the 3.5mm cable for any Hifiman Arya's with loose connections
Headphone Stand for Hifiman EF500 DAC/Headphone amp Print on the side No support material needed. I covered the top with self adhesive microfibre fabric Included is the f3d file
Headphone Stand for Hifiman EF500 DAC/Headphone amp Print on the side No support material needed. I covered the top with self adhesive microfibre fabric Included is the f3d file
Simple printable adapter ring for Hifiman HE4xx (HE400se, HE400i, HE400S) that allows mounting standard round earpads (e.g. 100–110 mm aftermarket pads like Dekoni, Brainwavz, Yaxi, etc.). Replaces stock mounting system → easier pad…
Rendering 💡 Printing Tips for Carbon Effect Plates I personally printed the "Doro Grill" using a carbon fiber effect build plate. If you are planning to print on a carbon texture plate, I highly recommend the following settings for better…
Hifiman HE400SE hexagonal grills, heavily inspired by the Custom Cans Super Grills . Modeled from scratch with a less dense hex pattern, purely based on personal preference. I would recommend printing them face down, they should easily…
Do not use vase or spiraling contour mode. Print at slow speed. As mentioned in the title, these bushings are for the Hifiman HE560 v1 model.
This is a headphone stand i modeled to fit my HIFIMAN HE400SE headphones. It can print without support. I printed mine on my Creality k2+ in PLA-CF. I included the F3d archive so you can modify the design. I included 2 versions, one that…
The height of the base has been reduced by 0.2mm, enough for 2 layers on the bottom. This allows it to be used easily with the original retention ring. However, it could be a user error on my end. On the original model, the nubs could be…
Printer: Ender 3 V1 with direct drive mod Slicer: Orca Slicer 2.3.0 Print settings: 0.2 mm layer height, 100% infill, no brim, skirt Material: eSUN PLA+
Simple yoke made for my Hifiman Ananda Stealth to use with the Capra Headband v3. To use with the stock screws from how the stock headband is secured, but you can use your own. Print with PETG. Link to the Capra Headband v3 made by Brian:
Rendering 💡 Printing Tips for Carbon Effect Plates I personally printed the "Doro Grill" using a carbon fiber effect build plate. If you are planning to print on a carbon texture plate, I highly recommend the following settings for better…
My original leather headband broke and i didn't really want to look for a replacement online, so i printed one instead, seems quite comfortable on my head. I made it quite wide to try and minimize the "headphone dent" problem, seems to…
I printed with MK4 and vase mode. Prusament PLA. Designed with Autodesk Fusion 360
What? Printable solution for using any flavor of 104mm, 108mm, or 110mm sleeved ear pads on your Hifiman headphones. Unlike other options, this solution is much slimmer, doesn't require supports, and is designed for quick printing. Note…
If you have broken the plastic ring (like i did) or you want to customize the HiFiMAN HE400i ver.2020 you can easily print this using PLA or PETG, no brim, infill or supports required, prints very fast and fits perfectly (be aware that…
