Counting matching models…
Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Patreon and…
Okuyasu used Za Hando to remove most of Josuke's body! A meme of Josuke from part 4 of Jojo's Bizarre Adventures.
Chikorita pot, in two versions: with or without drainage hole. Modified to be a flower pot from a model downloaded from the internet. Macetero de Chikorita, en dos versiones: con o sin agujero de drenaje. Modificado para ser macetero a…
These are a few fundamental Sashiko templates that I use for visible mending. Use a water washable marker (eg Crayola water washable marker) or heat erased pen (eg Pilot Frixion) to mark the lines onto your fabric or garment. I have also…
This airtight capsule offers a reliable solution for safely storing essentials like pills, matches, and small tools, keeping your belongings secure in any environment. Compact, durable, and versatile, it’s the ideal companion for camping,…
First you print the top 2 times, with the top down. there is no support needed inside the hinges. After that you can print all legs and hingepins. They all store easily inside and give you a wide range of table heigths. Assembly is super…
Can be printed without support upright, or with snug default supports inside the catch notches
Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Patreon and…
I took the Model from the game and posed it with killer queen :)
Hikvision protective shield for KV6103/6113 series villa door station.
There are 2 GCODEs included. One of them irons the top of the print to give it a smooth and gapless finish, but it is almost 25 minutes longer…
Probably the first upload of Nokotan's antlers on this website, all parts are included and correctly scaled in the shikanoko.3mf file. I recommend printing the headband with 4 wall loops or 100% concentric infill You can either glue the…
Hitachi / Hikoki Battery Changer Wall Mount requires longer screws to mount to charger screws and feet stick out a bit further then adapter but it still works
A dual ended key chain whistle with audible and inaudible tones. The silent whistle sits at just under 19khz (see picture) and should be inaudible to most humans, while the other end aims to achieve the opposite purpose and is great for…
HIKOKI HITACHI Battery holder
Quote from The Hitchhiker's Guide to the Galaxy. The main model has stacked letters and is easiest to print with a dual extruder or MMU. The simplified version allows dual color with a single filament swap.
This is a connector to join a water bottle to the output of a Sawyer Squeeze water filter. See Squeeze Water Filtration System for details. This model has a standard 28mm thread, so it will fit the majority of store bought PET bottles, as…
There's a little matter I forgot to mention. Beware of hitchhiking ghosts! They have selected you to fill our quota, and they'll haunt you until you return! Now I will raise the safety bar, and a ghost will follow you home! Inspired by…
The title says it all! I have made a hanging frame for my old JBL GO2. Ideal for hiking trips and mountain bike rides. I have printed with ABS that shrinks quite a lot. The model is 0.2-0.3 mm larger than the speaker itself. Even like…
This is the true shikai zangetsu keychain from bleach tybw
The NVR is shifted forward for about 60mm, suitable for shallow rack cabinets where there's not enough depth the height is also slightly higher than 1U because it holds the NVR from the bottom, not a problem if you leave a bit of space…
Articulated model with ball joints. Most of the model prints without support ; exept the abdomen and web shooter, organic model works great. download 1 full plate or choose : one of the two body variants with eyes (the eyes differ) OR the…
I am still working on it. only legs are ready at the moment. [ Ignore print quality my filament is really old and brittle ] Hope you like it. Please share your feedback!! Also check my other Gundam model Dummy 13 wears Mobile Suit Gundam…
Simple vase for dried flowers There are two versions: There is 1.2mm thick for normal printing (with 0.4mm or 0.6mm nozzle) There is solid for “vasemode" Hope you like it :D Download and support!
Hikoki battery wall mount suitable for multivolt batteries. The original file didn't fit the multivolt batteries. Edited in Blender to fit the multivolt batteries. The batteries won't fall out because I kept some resistance while sliding…
Bracket for mounting Hikvision doorbell camera with 45 degree angle, intended to be mounted in a corner. Can be mounted left or right. Print settings: 0.2mm layers, 20% infill. I printed in silver PLA to (roughly) match the camera's…
prints standing up no supports
The Pal with the goofiest face. This is Chikipi from the new video game PalWorld. I recommend 0.08mm layer height and tree supports. Enjoy!
I am still working on it. The model is almost done. [ Ignore print quality my filament is really old and brittle ] Hope you like it. Please share your feedback!!
Can be printed without support upright, or with snug default supports inside the catch notches.
I needed a new trowel for a long hike, but unfortunately my local outfitter only had expensive trowels in stock. I designed this with hiking/backpacking in mind-- the trowel is lightweight, comfortable to use digging small holes, and can…
This is of interest to you 🌟 Welcome to the community! 🌟 Are you a shop and do you want the commercial rights to the models? Do you want to receive 4 unique models? Take advantage of the offer 5 dollars per month for the first 100 users.…
Hiking Pole Clip for hiking poles with 16mm diameter. Print ‘standing’ so the clips don't break apart. Updates: 2022-03-28 - added a model with 14.5mm diameter for a nice lady who wants to hike the camino :-), unfortunately my original…
Hike! is a game of dog sled racing. This meeple can be used to represent dogs as you organise your sled prior to racing. https://www.kickstarter.com/projects/1485795534/hike-a-card-drafting-racing-game-with-huskies Don't forget to add the…
Pro majitele HIKVision kamer, domeček pro montáž kamery na stěnu nebo do podbití, pokud vám kouká ze zdi/podbití už RJ45 koncovka.
This design began with the idea that a small structural shift, like a clip, could reshape how we carry tools in motion. Mountensil is a clip-on hiking cutlery set inspired by the simple gesture of sliding a bookmark into place. This…
I updated the hikari and made a modular version. You can find the new model here: https://makerworld.com/de/models/2446079-hikari-203-modular-bcar Explore the "hikari 103" - a high-performance 3D printed BCAR (Barrel Contact Accuracy Rig)…
A sleek UNIHIKER case! No screws needed, it's held together with seamless clips for a secure fit. I made sure to keep all the ports easily accessible, so no functionality is lost. The buttons have been designed to keep their tactile…
Simple clip to be used as temporary storage for your hiking poles when you need both of your hands free during a walk. Two models available one for full size 25mm strap, and B model for narrower shoulder strap, only difference is the slot…
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Layer Infill: 30% Filament brand: Generic Filament material: PLA
Adapter to connect a Hikoki UP18DA to a SUP pump hose.
Printable 3D model. Chikorita planter. Pokemon inspiration. STL file.
Easy to make Hiker keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Needed to design a custom Junction Box for a Hikvision dome camera DS-2CD2145FWD-I(s). Came up with a simple design of a Junction box with a threaded inner side and a corresponding mounting plate for the camera with an outer thread.…
Towel not included. Printed at .2 Speed profile, with ironing on all top layers, and a color swap on the last four layers. Tip for scaling: I've uploaded it as a pretty big size, make sure if you scale it down you scale it smaller in the…
Trekking Pole storage clips for poles with a 19mm diameter. Scale the print to fit yours.
Wall mount for Hikvision doorbell DK-KV8x13, 45 deg. You need four M3 brass heat insert nuts.
I am converting a passive subwoofer to active, and so got this amplifier from amazon: https://smile.amazon.com/gp/product/B01N5DGK37/ It comes as a bare board, so I needed a case, this is it. The first run fit pretty well, I had to use a…
A remixed model of a Chikorita model from the Pokémon franchise; the idea was to create a beautiful vase based on a Chikorita with a real leaf on its head. The plant should be placed in a test tube that can be found at the "Flying Tiger"…
Figura de colección de Rukia Kuchiki con ropa casual
Love Is War: Chika Wall Art Printed using PrusaSlicer's color change feature Ironing enabled for the top two surface layers (body and bow) Prusa .gcode included .3mf and .stl included Can be scaled down, but the quality may be affected
Print Settings Supports: Yes Resolution: 0.28 Infill: 20 Filament: PETG
Update: The model has been enlarged and adapted for larger white wine glasses and red wine glasses to reduce tip-overs. --------------------------------------------------------------------------------------------- Weinfreunde kennen das…
Nice hook to carry with you when you are out hiking. I have tested the hook with 40kg when printed in pla and 4 walls using a .4mm nozzle. I never went any further cause usually a backback dont way that much. I used 7 strand paracord,…
More design on: https://www.patreon.com/c/mortex3d PATREON: Mortex.3d INSTAGRAM: Mortex.3d
Inspired by the Sashiko Templates of RagingRoosevelt. Same size/basic chamfer/fillet. Some are designed for a more fineliner style pen due to size constrained. Kawari komezashi (rice stitch variation) Kawari komezashi (rice stitch 2e…
Just a small container to clip to your backpack. Securely fits some smokeware and a specific type of lighter. Threads have some tolerances - should be easy to print
Made this for a friend who likes to go hiking. He wanted a small bobbin to roll some ducttape on to, instead of having to pack a whole roll in his backpack. Updated the model to improve the fit of the locating pin that connects the two…
This is a modern decoration for lovers of hiking. 25% infill 0.2 layer height print upside down to get a nicer surface Like and visit my page if you like this!
A handguard for the SLAB by Sillybutts. Attaches via 6 of the original screws. M-LOK slots at the bottom and each side allow the attachment of accessories like rails, grips and handstops. June 2nd 2024: Update 1.1 - Slight redesign of the…
Angle mount for Hikvision camera (DS-2CD2343) to roof beam (100mm base width). Camera outer diameter 127,3mm, 25° angle. Printed with 3 wall loops, 5% gyroid infill.
If you want to personalize your car to bring a little of the outdoors to the streets, this license plate cover is the perfect thing! The full license plate cover is too large to be printed on most print beds, so it's broken up into two…
I wanted something a bit more compact for my cameras at my property. The cat5 goes right through the back of this box in through the wall. There's three screw holes for recessing screw to anchor. I added 8-32 screw fittings to hold the…
I previously mounted my cameras directly to walls and posts and wanted to both clean up the wiring as well as get a better viewing angle that was not obstructed. As well, many of the existing designs have a flat top for easy printing but…
DS-2CD2146 (diameter 121.4 mm) https://www.hikvision.com/en/products/IP-Products/Network-Cameras/Pro-Series-EasyIP-/ds-2cd2146g2-i-su-/?q=ds-2cd2146g2-i&pageNum=1&position=1&hiksearch=true Other material: Camera mounting screws 3pcs…
Throw lever for the focus on a Hikmicro SQ50L 3.0 scope, might also fit others with focus ring size around 69mm You will aslo need a m3 screw and nut I printed this in PETG, but TPU is probably better
Bring a bit of the outdoors and adventure with you wherever you go with this Take a Hike Keychain! This can be printed in multi-colour even without any upgrades using a single nozzle (no multi-material or Palette Pro needed!). I've…
I liked the “Don't Panic” sign by muzz64, but it didn't really give me Hitchhiker's Guide vibes, so using the blank sign as a base in Fusion360, I rewrote the text using Gill Sans Bold Condensed and adding an exclamation mark. I'm still…
I designed this two piece holder/mounter to mount my HikVision unit on the wall as you see in the pictures. Print Settings and Filament: It was an interesting journey, I printed it with ABS on my Ender 3 S1 Pro, and sliced it on Ultimaker…
Thread reduction from G 3/4 to PG 9. Perfect fit for Hikvision IP camera junction boxes.
A bookmark inspired by Douglas Adam's Hitchhiker's Guide to the Galaxy series. Use this bookmark so you Don't Panic and lose your page!
I bought a PS2 Hyakushiki SCPH-55000 GU but it didn't come with the bundled special stand. So here's my recreation of the stand. Print Print the two decorative plates in horizontal position for best quality. * Recommended layer height:…
These are a few floral Sashiko templates that I use for visible mending. Use a water washable marker (eg Crayola water washable marker), a heat erased pen (eg Pilot Frixion), or a wax marking pen (eg Clover Water Soluble Pencils) to mark…
Like the original but with an hole for an M6 screw. 0.1mm clearance.
A mount for a Hikvision Dome camera with 111mm diameter base (several Hikvision cameras have this size base). I've included the Fusion360 CAD file so folk can alter it to suit. Category: Camera
Shikoku 1889 organizer for the Grand Trunk Games edition. The game comes with nice trays for the tiles, this organizer fills in the space on top of the boards, and holds the certificates, privates, and tokens. A space is left to hold the…
🐾 Cartoon-Style Hiking Dachshund – EN Description This cheerful 3D model showcases a cartoon-style dachshund as an enthusiastic hiker. Outfitted with a hat and goggles, a neck bandana, and a backpack, the dog firmly grips hiking poles…
It was created for and is compatible with the Hikvision DS-KH6320-WTE1 model, which is a KH6 Series IP-Based Indoor Station.It was created for and is compatible with the Hikvision DS-KH6320-WTE1 model, which is a KH6 Series IP-Based…
This model is based on a popular image of the bubu and dudu characters hiking.
My fiancee lost one of her hiking pole clips in a national park so I took a picture of the other clip, converted it to an .svg file, then imported it into Tinkercad. It works perfectly as a replacement clip. The brand of trekking poles is…
Perfect for Your Scout Adventures: One with an Axe and the Other with a Scout Neckerchief
This is a camera cage and tripod adapter for the HIKMICRO Mini2Plus V2 thermal imaging camera module. The combination of a thoughtful design and a specific material choice results in a ¼-inch mounting solution that is both easy to print…
Attaches a 2.5" Rigid vac hose to the dust port on your Hitachi-Koki 12" sliding compound miter saw. Printed at 0.2mm layer height with 0.4mm nozzle.
This clip allows you to attach 2 hiking poles with a diameter of 16mm to a 20mm strap. Print in PETG without support using 3 perimeters. There's another version with 4 holes for a string.
This mount made for Hikvision DS-2CD2347G2-LSU/SL IP camera. But will work for other models with same dimensions. I wanted to connect the camera to tiles on the wall, but didn't want to make holes in the wall. I printed the model using…
I found these inexpensive but seemingly sturdy quick release desk mounts but they're made for the Logitech 3d Extreme joystick. I made this conversion plate to mount my VKB Gladiator NXTs to it. Seems to work pretty well. Very sturdy.…
This is a simple case for the Unihiker K10. The idea is it exposes all of the ports, speaker, and camera. It snaps together with connectors at each end.This is a simple case for the Unihiker K10. The idea is it exposes all of the ports,…
This is a modified version of Adrien Liotard's excellent Tachikoma model, found here: https://grabcad.com/library/tachikoma-2 Greetings, fans of chatty military hardware! I wanted a Tachikoma model for which I could print each individual…
While searching for an efficient way to store my cordless drill, I came across several solutions. However, none of them met my requirements, so I decided to design my own storage solution. This design is specifically created for the…
Hikoki/Hitachi/Metabo C10RJ to Bosch Universal Vac 15 vacuum port adapter Print in PETG
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Perfect for Hikers, Adventurers, and Everyday Use! Upgrade your keychain with this versatile NFC Tag Key Ring – designed to make your life easier and safer! Whether you’re out on a hike, commuting, or just running errands, this practical…
Whipped this up really quickly to mount some drives in second hand DVR my employer purchased. And it works. Not sure of all the models it'll fit and it's not perfect, but they don't pay OT on this stuff so “good enough to work” is all…
This hiking pole cap was made to fit the black diamond distance FLZ hiking poles and replace lost standard rubber tips such as these decathlon poles. The cap inner diameter is 10.1mm and the hole height is 28mm with a snug fit on the…
Wall mount for Hikvision camera DS-2CD2145F... You need 3 M5 brass heat insert nuts.
A nice 3D models of the next Pokemons - Pikachu, Bulbasaur, Totodile, Squirtle, Chikorita, Charmander
![Gundam Dummy 13 Legs [Hyaku Shiki]](https://media.printables.com/media/prints/954080/images/7277132_46e37920-f9a1-4a3e-9f49-bfbe3823089f_114923b3-3328-4ec8-80bd-644c96eba3d7/20240725_152148.jpg)
![Gundam Dummy 13 Arms [Hyaku Shiki]](https://media.printables.com/media/prints/966689/images/7378707_eda5abb2-e035-4e2b-84d4-c52f71b8ad6c_5a38e99f-5930-49f7-9f54-f91cf4cfd3fb/1600.jpg)
