Counting matching models…
The simple phone holder my volvo lacked so desperately. I designed it for my pixel 6, the phone hole is 80mm*13.3mm which you may need to tweak for your exact phone but it may just work as is The scale may be a bit off so please check…
use the ranger vent thing i made this one has a hole in it for drainage and the bracket is lower so u can see the radio better
Ich habe dieses Teil konstruiert, gedruckt und montiert. Print Settings Rafts: No Supports: No **Resolution:** 0,16 MM Infill: 100 % **Filament:** any anyCustom Section ============== Category: Household Supplies
hier ein Gurtgriff für unser Golf Cabriolet, es ist immer umständlich bis schwierig den Gurt in die Finger zu bekommen, hiermit geht es ein wenig besser.
Controller holder for led strip or any other same dimensions controller.
I wanted a tidy way to set up my MMU onto my RepRack Shelving. As the spool holders seem to work well, I decided to create a mounting solution for them. Note this is designed for 20mm tubing. Simply slide them onto the bracket and clip…
For best results print the bit holder in tpu and the adapter in PETG or PLA+
basic cupholder for e36 note: this model will not be a direct print and fit, it does need a few layers of tape (i used electrical tape) to fill in the gaps and to give it a secure hold in the stock “cupholder”. designed directly for the…
4 slot Juki nozzle holder for Pick and Place machine. Print slots up no support. Category: Tools
The simple phone holder my volvo lacked so desperately. I designed it for my pixel 6, the phone hole is 80mm*13.3mm which you may need to tweak for your exact phone but it may just work as is The scale may be a bit off so please check…
Place to fit your prusa screw drivers and prusa wire brush
use the ranger vent thing i made this one has a hole in it for drainage and the bracket is lower so u can see the radio better
This spare part is similar to the original part. Material: PETG Layer height: 0,1 mm - 0,15 mm (recommended). Infill: ≥ 80% Supports: Yes. I hope you find it useful.
This is a holder for 1/2" shank drill bits. I mounted a post drill to a column and figured that it would be a good idea to store bits next to the drill. The holder can hold up to 12 drill bits. The holder is zip tied to the column. It is…
This is my first attempt at making my own model, crossing my fingers
simple design easy to print i printed in PETG at 230 with 20mm/s speed 15 percent infill could go less
I made this for my desk and it works amazing it can hold up to 3 pound cups and drinks.
PTFE tube holder mounted on the shelf. On the same shelf are mounted filament spools with a spring for self-retraction of the filament during unloading.
An holder for two small hobby knife (X-acto style, outside diameter is 8mm). Also three slots for spare new blades included in the holder. You can use also for pencil or other tools compatibile wit 6mm outside diameter. Printed in green…
Paper towel holder for plastic tool wall. Easy to move to get the best positions on the wall, depending on the work you need to do. To get a new towel in just remove one bracket. Printed in PLA with honeycomb 20% infill without bottom and…
I used a couple other folks' designs to slap together a holder for my multimeter, the Kaiweets KM100. It has space to hold the probes, as well as some alligator leads, or other things. this fits gridfinity 2x3. Thanks, and Happy Printing!
(CZ) 3D tiskárnu nevlastním. Pokusil jsem vymodelovat držák na tužky, na nářadí a k tomu hrníček. Ať už taky na tužky nebo i na vodu, kávu, čaj. Pokud budete používat hrníček na pití, využijte filament, který je zdravotně nezávadní. Pokud…
Einfacher Kerzenhalter für den Kuchen. Geeignet für 12mm Kerzen. Fusion Datei wie immer dabei, feel free to remix
Holder to secure the bikelock on my upright bike stand. The additional holes allow to add hex keyes or a multi tool. Includes a internal pipe to add reinforcement. Pause printing around 7mm in heigth to add the additional steelrope or…
Organize your pens in style! The model was designed to be printed in 2 colors. You can also print it in vase mode, but 2 colors is recommended. For 2 colors, use .20 layer height. Change filament before printing layer 66 (13.20mm) and…
Just a simple holder/organiser for 4 Milwaukee shockwave boxes The walls are 2mm thick the more wall loops you use the stronger it will be, I printed with 3 walls in PETG and seems pretty tough
