Counting matching models…
Two qualities He comes in a high quality and low quality version, so you don't need to load an unnecessarily heavy mesh in your FDM slicer, but you'll want to use the more detailed one when resin printing. Printing instructions He comes…
S'imprime en deux pièces qui s'emboite. no support 20% infill
A simple keychain for your New Holland tractor. Dimensions; 52x45 mm
Made a remix of the Tom Holland fridge magnet. This one is partial Tom Holland and partial Spider Man This one is made for 8x3mm magnets and measures 100x80x58 mm. Printer: Sculpto Pro 2 Quality: Fine (0.15 mm) Support: Partial (supports…
Two versions where one has the leaf veins inset and the other they protrude (less filament). Dimensions: 52mm x 61mm For multiple colors: 0.00mm - 2.00mm (white) 2.20mm - 3.00mm (blue)
History This is a replica of the lighthouse which stands at the mouth of the Rhine into the North Sea (Hoek van Holland, Rotterdam). https://en.wikipedia.org/wiki/Low_Light_of_the_Hook_of_Holland A very similar model stands on Oberalp…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Hey there, here is my design that i made for my uncle, a farmer who drives a T7 new holland Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 100 Filament:…
A KEY FOR NEW DHOLLANDIA LIFTS THAT ALLOWS YOU TO CLOS THE RECONSTRUCTION WITHOUT REMOVING THE KEY
Made a Tom Holland fridge magnet to mess with my daughter. This one is made for 8x3mm magnets and measures 100x80x58 mm. Printer: Sculpto Pro 2 Quality: Fine (0.15 mm) Support: Partial (supports from build plate only) Strength: Weak (low…
This is ‘’Nijntje'' a child-book character invented by Dick Bruna. For more of the ~Welcome to Holland series be sure to check out the collection: https://www.printables.com/@THop3D/collections/777187 If anyone has any questions please…
A simple replacement pallet fork handlers for the SIKU New Holland tractor model. It also fits other SIKU models of the same scale. Print with 4 perimeters or 100% infill!
Hey there I saw that my other keychains are going very well on Thingiverse so I thought hey, why not make more, so t keep it in theme with vehicles I present the new holland T6 keychain for the tractor lovers on this site. For the…
A simple "New Holland" Keychain. made with <3 by key3Dchain The logo/text shown may be protected by copyright. Source: SVG File If there is a violation, I will be happy to remove the model. Get in touch via email: [email protected]
An ‘’Amsterdam's Paaltje'', these poles can be found all around Amsterdam. For more of the ~Welcome to Holland series be sure to check out the collection: https://www.printables.com/@THop3D/collections/777187 If anyone has any questions…
A ‘’Fiets'', when visiting the Netherlands you will know why. For more of the ~Welcome to Holland series be sure to check out the collection: https://www.printables.com/@THop3D/collections/777187 If anyone has any questions please contact…
Remix of the TH Logo using Tinkercad.
A model of a typical dutch waffle filled with a sweet caramel filling, The ‘’Stroopwafel''. For more of the ~Welcome to Holland series be sure to check out the collection: https://www.printables.com/@THop3D/collections/777187 If anyone…
New Holland B95 backhoe window hinge latch. I add material to the rear pin hole to help strengthen it, the factory one tends to break in this spot. I recommend 7 perimeter on this print for strength and print it with PET. PLA is to weak…
A ‘’windmolen'' is often seen in the Netherlands and are often used to mill grain or to pump water out of the lower land. That is the reason the Netherlands can exist below see level. This design consists of 3 parts that can be easily…
IMPORTANT!!! i would advise to print at 2x size because at 1x it doesnt have all the details.
When I saw the Veronoi vase design by mikecore69 . The Cholla (jumping cactus) skeletons you find in the desert came to mind so I decided to make a version which highlights this. Place the skeleton first, then add the flesh to it.
Modelo decorativo para la pared de una cosechadora New Holland CX.
A Piece of "kaas'' and a ''Kaaswiel'' For more of the ~Welcome to Holland series be sure to check out the collection: https://www.printables.com/@THop3D/collections/777187 If anyone has any questions please contact me, THop3D
BZK-F3 Hollander BN Edition for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
Black Ace Griff Hollaron has made a lot of special modifications himself to turn his own Imperial-issue TIE fighter into a unique and fearsome machine. Although his extensive refittings are regarded by some as a little too drastic, it's…
ONLY FITS T9.645!!!
This kit-card will let you have a mini model of the Inholland Electric Dragonfly. Break of the 0.8mm sticks holding it in place. The small card can be used as a stand for the aircraft as shown in the picture. Slide in the wings in the…
This model was made to design a mechanism to control the steering wheel using Ag Open GPS
it is a phone holder for new holland tractors wich use intelliview 3. you will need to buy a grundig phone holder wich slides in to the hole. https://www.action.com/nl-be/p/3013911/grundig-telefoonhouder-met-draadloze-oplader/
Deckel für Flasche Holla die Bierfee
na widoczne kółko dodaj kółko do breloka i gotowe
This is a toy. With working wheels.
blade protector for the Boska Holland 320416 Choco Chopper Chocolate Knife, Compact, Stainless Steel ( https://de.boska.com/products/choco-chopper ) printed with greentec pro (dishwasher safe) to print upright on the short edge Print…
PRINT WITH TPU Tractor cap near the back window for tractor New Holland T5-90. The dimensions are: X=60mm, Y=80mm, Z=10mm, Gap=5mm. Printed with TPU 98A, supports needed, also you can use brims but i didn't use them. TISKNĚTE Z TPU Víčko…
A model of a typical dutch cookie filled with a sweet filling, The ‘’Gevulde Koek''. For more of the ~Welcome to Holland series be sure to check out the collection: https://www.printables.com/@THop3D/collections/777187 If anyone has any…
Variants available on dayviedesigns.com See the downloads section Printing Instructions: The lamp shade is a two part 3mf (Cholla-Lamp_C) to use separate settings. The adapter part inside requires support and infill. The outer lamp shade…
A simple print in the size of an official Postcard. The colors can be adjusted in your slicer.
This is simple keytag of the 2017 Spider Logo from Spider Man Homecoming (Tom Holland). Adjust the scale as you desire before printing. Both multicolour and unicolour models are available. Cheers!
Variants available on dayviedesigns.com See the downloads section Printing Instructions: The lamp shade is a two part 3mf (Cholla-Lamp_B3) to use separate settings. The adapter part inside requires support and infill. The outer lamp shade…
I have designed this model to perfectly fit the existing holes in my Gazelle “Marathon” bike frame. The original clips to hold the gear cable were broken off. Instead of designing them after the original part (hole in the middle to push a…
🌟 New Holland Agriculture – 3D‑Printed LED Display Lamp Show your passion for New Holland Agriculture with this stylish 3D‑printed LED display lamp. Designed for clean multicolor printing and easy assembly, it brings a warm, professional…
This is a typical piece of licorice called a ‘’Muntdropje'' because of its coin look. For more of the ~Welcome to Holland series be sure to check out the collection: https://www.printables.com/@THop3D/collections/777187 If anyone has any…
Another week, another LAM! This time it's the Hollander, for when you need to get the big-badda-boom to the front lines with speed and precision. Bounce this thing around the map, sniping as you go and see how many cockpits you can cap.…
Support de tablette pour Panasonic CF-H2 destiné a être installé sur le support de boitier VESA75 d'origine dans une cabine de New Holland ou Case IH. Des vis M3 x 16mm sont utilisées pour fixer la tablette sur le support imprimé.…
Variants available on dayviedesigns.com See the downloads section Printing Instructions: The lamp shade is a two part 3mf (Cholla-Lamp_D) to use separate settings. The adapter part inside requires support and infill. The outer lamp shade…
Thinner spacer used to move the sensor position closer to the gearbox, some transmissions suffer from a weird problem where the rod for actuationg the sensor bends and in original position the drive can become disconnected from the…
I made this part for repair of a engine hood latch for Case IH jx90 tractor. Probably also fits other similar CNH tractors.
Bring a touch of the Netherlands into your home with this beautiful lamp! 🌷 Featuring iconic elements like windmills, tulips, and a hint of Delft blue, this lamp not only shines light but also radiates the charm of our wonderful country.…
Ce support permet d'ajouter un capteur d'angle sur l'essieux arrière d'une batteuse New Holland CX 5.80
The old ceramic knobs used to adjust the rake height for our New Holland hay rake had rusted to the bolts and seized. Recently I'd printed a shift knob from PM3DCF and figured it was almost the exact same sizes as the old knobs. So a few…
Break your brake button? Here's one for your TN series New Holland. Category: Outdoor & Garden
Hello everyone! This tool is designed for centering the clutch on Ford / New Holland tractors. The centering tool is very simple; it passes through the pressure plate, clutch disc, pilot bearing, and splines. I used a PETG-printed version…
A compact and practical holder designed specifically for the IKEA TRÅDFRI remote, tailored to fit seamlessly onto a Hollandia bed frame. The holder uses a precise press-fit design, ensuring the remote stays securely in place while…
14 mm ID x 40 mm AD x 38 mm L Gummibuchse/Lager/Dämpfer für diverse Anwendung in New Holland und Case Mähdreschern. Druckparameter: 5 Wände / 100% Füllung / TPU 95A Rubber bushings/bearings/dampers for various applications in New Holland…
Gummibuchse/Lager/Dämpfer für diverse Anwendung in New Holland und Case Mähdreschern. Druckparameter: 5 Wände / 100% Füllung / TPU 95A 21 mm ID x 40 mm AD x 38 mm L Rubber bushings/bearings/dampers for various applications in New Holland…
23 mm ID x 40 mm AD x 40 mm L Gummibuchse/Lager/Dämpfer für diverse Anwendung in New Holland und Case Mähdreschern. Druckparameter: 5 Wände / 100% Füllung / TPU 95A Rubber bushings/bearings/dampers for various applications in New Holland…
This model was made to design a mechanism to control the steering wheel using Ag Open GPS
I made this part for repair of a engine hood latch for Case IH jx90 tractor. Probably also fits other similar CNH tractors.
Ce support permet d'ajouter un capteur d'angle sur l'essieux arrière d'une batteuse New Holland CX 5.80
3D printable topographic miniature of Holland beach - 🇺🇸 United States Capture the beauty of Holland beach 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 42.778,…
🌟 New Holland Agriculture – 3D‑Printed LED Display Lamp Show your passion for New Holland Agriculture with this stylish 3D‑printed LED display lamp. Designed for clean multicolor printing and easy assembly, it brings a warm, professional…
A compact and practical holder designed specifically for the IKEA TRÅDFRI remote, tailored to fit seamlessly onto a Hollandia bed frame. The holder uses a precise press-fit design, ensuring the remote stays securely in place while…
Variants available on dayviedesigns.com See the downloads section Printing Instructions: The lamp shade is a two part 3mf (Cholla-Lamp_B3) to use separate settings. The adapter part inside requires support and infill. The outer lamp shade…
Variants available on dayviedesigns.com See the downloads section Printing Instructions: The lamp shade is a two part 3mf (Cholla-Lamp_C) to use separate settings. The adapter part inside requires support and infill. The outer lamp shade…
Swamp Thing - Dr. Alec Holland - 1982 3D printable model.
Variants available on dayviedesigns.com See the downloads section Printing Instructions: The lamp shade is a two part 3mf (Cholla-Lamp_D) to use separate settings. The adapter part inside requires support and infill. The outer lamp shade…
zaślepka gniazda hydrauliki do New Holland T.8.320
Description: Cholla-inspired 3D printable sphere designed for shrimp aquariums. Provides natural-looking shelter and grazing surfaces. Digital files only, includes STL and OBJ files. No physical item included. By purchasing, you…
3D printable topographic miniature of Holland beach - 🇺🇸 United States Capture the beauty of Holland beach 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 42.778,…
This box is inspired by the movie Mulholland drive. You need to rivet the lid onto the "box". You can do this with an clothing iron and a piece of filament. Please see the video for more info and a closer look at the box:…
