12 models
This battery holder is for a Metabo HPT Multivolt 18v / 36v battery. It can be mounted on any flat surface using the screws. This item can be printed vertically (on the side without text) without supports. You may want to increase your…
I wanted to have switched control over the two different 12v circuits (12v constant and 12v switched) used to make the harness. Included in the pictures is a mini diagram i drew and the part numbers for the two rocker switches i used. You…
Logos for Empire, Stanley Fatmax, Metabo HPT and GearWrench Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have…
I ended up printing this out of PETG-CF. Not the cleanest print, but it certainly does the job. I attached it onto the saw with a hose clamp. It's nice and secure. Support required.
Attaches a 2.5" Rigid vac hose to the dust port on your Hitachi-Koki 12" sliding compound miter saw. Printed at 0.2mm layer height with 0.4mm nozzle.
Instruct the patient to take the pegs from a container, one by one, and place them into the holes on the board, as quickly as possible, using only the hand being evaluated. Then, instruct the patient to remove the pegs from the holes, one…
I have wanted to organize my chargers for a while now. Having invested time into printing the parts for the HSW system already it was also important that the mounts were compatible. I was able to find STLs for other brands, but there is…
Needed to wall mount my Metabo Multivolt Batteries and couldn't find anything so I made a few different variations which will give you the freedom to position however is best for you. Print Info: Supports: Yes (on plate) Layer Height:…
I liked the style / quick print of KaptenF's mount but I wanted one that locks the battery in.
The "6HPT" task is one of the tasks of the MacHAND hand performance assessment (MPA). Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 15% Filament: Any PLA N/A Notes:…
Modified version of the B clip to bit the slightly larger cable arm on the Core One L. The indented part of the arm on the Core One L is 10mm, on the Core One it's 8.5mm. I made the slot a bit bigger to allow the B to clip on securely.
I printed this with 4 walls, and 20% insert in Petg.
