Counting matching models…
6 Part Gridfinity baseplates for the Husky Tool Storage 27 in. W 5-Drawer Gloss Black Rolling Tool Cabinet . UPDATE: Tweaked and added Tolerances section, as well as OpenSCAD file. Drawer Dimensions: 585 mm x 381mm . Tolerances: There…
Ratchet and Socket Set Holder for husky 12 point pass through metric and standard sockets. Excuse the surface rust. Gridfinity and non-gridfinity versions. Printed on a Ender 3, .28 layer height, 10% concentric infill
My Husky Toolbox drawer either came off when I moved, or they were never on there to begin with. This was my first ever 3D Print and Modeling. I literally have zero experience and I am pretty happy with how they came out. When installing,…
Printed in PLA Grid is lower profile due to Z axis clearance of the drawer Per j03y “Using the Prusa slicer fast .4 profile I changed the infill to lightning, top/bottom solid layers to two, and infill to 10%” If you want to generate your…
A smaller tube to hold my needle file set. Doesn't fit in my 3D printer toolbox though, so stay tuned for revision 2!
Parts 1x Husky box which can be found at Home Depot 2x Capricorn (or similar) bowden tube kit which I bought at MicroCenter 12x 608 ball bearings - steel or print your own 24x M3x0.5mm 3.85mm deep threaded heat inserts 24x M3x12mm…
I created this set of Gridfinity holders for my 1/2" Husky Torque Wrench. I didn't see anything specifically for this wrench and wanted to make something. Design worked on 1st try and turned out great.
Made by me in SketchUp 2017. I really like these drawers, but they only come with one set of dividers. I have their other stackable units with the moveable trays and I wanted the best of both worlds. The sides, front, back, and middle…
This model was made in collaboration with @SteveB_1401066 whom had partially redesigned the holder to allow for 3D printable labels that can be inserted into the label holder. I was able to reformulate the design with his guidance and…
End caps for Husky metal shelf. May work with other brands, each "leg" is 30mm. Successfully printed in PETG and TPU, preferring the TPU for flexibility and better grip. The bottom has a flanged base to spread load and provide better…
Gridfinity - Husky 27in 5 Drawer Tool Chest Though gridfinity is easyish, this was a bit tricky. I couldn't find internal measurements for the drawers online, and it is really hard to get a ruler on those 90-degree sides. I will be…
This Siberian Husky figurine features realistic proportions with simplified fur geometry for clean printing. Designed as a single-color, one-piece FDM model. Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
this is a remix done by ECF just split things up to smaller pieces with connectors this is a great file by ECF. So grab their files if you have a larger printer. But if you have a smaller printer bed and don't want to spend the time to…
This gridfinity grid fits the 19" x 15" drawers for a Husky 46" x 18" mobile workbench with minimal play from side to side. With my set up on an Elegoo Centauri Carbon, it took about 5 hours and 175g of Creality PETG. Once everything is…
Filament spool (interlocking) crossbar - Husky shelf [Cross bar - black] Dimensions 18.1 x 18.09 x 226 [Tube (Interlocking) - grey] - mesh boolean Dimensions: 22.8 x 22.75 x 181 If you want to have a filament spool holder but don't want…
Unleash a touch of wild beauty between your pages with the Ornamental Husky Hueforge Bookmark – a bold 3D printed Hueforge bookmark inspired by the Husky’s icy gaze, fearless spirit, and loyal heart. This unique design features a striking…
made to be able to use the full capacity of the drawer on the 52 in tool box with gridfinity photos show my tools already in the drawer. my forst attempt at any type of 3d modeling. i used tinker cad to make them and printed the pieces…
Pair of Gridifinity storage sets for the Husky multi-bit ratcheting screwdrivers - Large/Normal and Stubby
Gridfinity Holder for older Husky Mini Pick Set - Updated version - better fit and smaller footprint
Thank you for downloading the model! If you like it, I would appreciate a like 👍, a comment, or sharing your print. It will help me create more models 😊
Included is both the .stl and painted .3mf. This file should be printed with 15% gyroid infill
Included is both the .stl and painted .3mf. This file should be printed with 15% gyroid infill
EDIT: it looks like home depot no longer offers these as "Husky" or "anvil" brand. there is a new HDX brand that is slightly longer (12.8"). I bought the new HDX organizers and they fit the existing inserts, though it seems the new boxes…
I had this old set of Husky 1/4" deep wells just sitting in a drawer, so I made a simple Gridfinity holder to keep them organized and easy to grab. Each slot is labeled and sized to fit snug without fighting you. Nothing fancy—just a…
This is a 2-part snap-together protective case for the HuskyLens AI vision sensor v1.1. The case & camera can be mounted with M3 screws. Holes in front are for bilateral white LEDs, RGB LED and lens. Raised arcs on top protect the control…
Original size is 200x200cm. This is my optimal size because it fits my frames perfectly. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Devil Design PLA black Devil Design PLA dark gray…
Räder sind in Originalgröße und Profilierung erstellt. Narbe ist für 1,5mm Stahldraht. Sie werden liegend als Ganzes gedruckt (siehe 3mf-Datei) da hierbei ein schönes Rad entstand.
I really liked the idea that @tooling_lee came up with of mounting the AMS lite to the post of the Husky rack I have. Provides easier access than wallmounting but still keeps it up and out of the way. However, the back plate screw holes…
Fits the HOLT5202BJ2 drawers perfect when printed with PLA While you could rotate 180 degrees this assumes you want no gap on the front drawer edge Since there is limited Z clearance I chose the minimal baseplate so they are staggered to…
6 Part Gridfinity baseplates for the Husky Tool Storage 27 in. W 5-Drawer Gloss Black Rolling Tool Cabinet . UPDATE: Tweaked and added Tolerances section, as well as OpenSCAD file. Drawer Dimensions: 585 mm x 381mm . Tolerances: There…
This tray fits inside a Husky Small Parts Organizer Box (Home Depot brand) and provides four smaller quadrants inside. Prints best in either PLA or PETG. 20% infill
This fits a Husky shelving unit. It clips into the adjustment holes on the end of the shelf. The square holes are 10mm wide X 16mm tall on my Husky shelf. I used ½ " electrical conduit from my local hardware store. I put a little glue on…
ABOUT: Looked all over and couldn't find a specific size for my wrenches. So I made it. Shout out to https://gridfinity.perplexinglabs.com/ for the assist as always. I left the socket slots without sizes so it could be customized.…
Assorted bins for holding sockets in a variety of shapes. More than half of my sockets are from a Husky kit, while the rest are a variety I've picked up over the years. Hope they're useful for y'all. White trim & text created by switching…
Gridfinity 2x6 Storage Bin for 3pc Husky Multi-Purpose File Set
Gridfinity holder for two Husky utility knives and a set of spare blades for said knives. Comes out to 4x2 grid. Preview photos printed in Overture Light Gray PETG.
It works well with PLA@100% infill so far. But to print it with PETG could make it much stronger. A pair of M4 bolt and nut is needed.
This simple RC tool holder is meant for the Husky Connect toolbox , which seems to be a popular rolling tool box system at my local RC track. There are 5 spots to hold my most used drivers: a 1.5mm hex, 2.0mm hex, 2.5mm hex, 5.5mm box and…
1x3x6 Gridfinity bin to hold 1 - 2 Husky (Or similarly sized) utility knives Buy me a coffee
Este modelo es un plato elevado para perros, diseñado con inspiración en el Art Deco y fabricado mediante impresión 3D, combina funcionalidad y estética. No solo proporciona una solución práctica para alimentar a su mascota, sino que…
Ratchet and Socket Set Holder for husky 12 point pass through metric and standard sockets. Excuse the surface rust. Gridfinity and non-gridfinity versions. Printed on a Ender 3, .28 layer height, 10% concentric infill
Print husky facing up w/ support - I find this works the best. The less support the easier it is to clean so some middle ground would do you good.
This is a 5x5x8 gridfinity redefined bin that will store torx, hex, Philips, and standard bits. The gridsize is 5x5, height is 8 units (57mm tall). It can be stacked on and clear all the bits below. Text is raised and can be paint pen…
Some holders for this in my opinion, underrated tool, it cuts, whatever you give it in my experience, it cuts it, and when it goes dull its a utility blade, swap it out! If you want vertical storage, I recommend v2, v1 is still being…
Dies ist ein einzigartige Bild meines verstorbenen Hundes. Mittels Photoshop und KI Optimiert. Es ist als Bild aber auch als Hueforge sehr schön geworden. Gedruckt wurde es mit Bambu PLA Matte Weiß, Bambu PLA Matte Schwarz, Bambu PLA…
Be sure to print in the same orientation as the original - on the side for maximum strength.
My Husky 46" Tool Storage Workbench short drawers fits 11 grids from gridfinity wide with some room to spare. I made these spacers to keep the general look but also fill in the space on the sides. I'm still learning 3d modeling and this…
A simple remix of Drew's excellent model to support both of my most used design tools Here is the TinkerCAD link if you want to further modify the design: https://www.tinkercad.com/things/k0HsyWvG3AR-gridfinity-caliper-xacto-holder-v2
A 3x6x4 Gridfinity bin to hold the wrenches from the 7 piece wrench ratcheting set from Husky
My Husky Toolbox drawer either came off when I moved, or they were never on there to begin with. This was my first ever 3D Print and Modeling. I literally have zero experience and I am pretty happy with how they came out. When installing,…
A simple 1 x 1 gridfinity that holds the Husky digital angle finder. It has internal magnets. Internal magnets To get the magnets inside of the internal magnets print, either pause the print when the walls of the magnets holes are a a…
Printed in PLA Grid is lower profile due to Z axis clearance of the drawer Per j03y “Using the Prusa slicer fast .4 profile I changed the infill to lightning, top/bottom solid layers to two, and infill to 10%” If you want to generate your…
This was modeled after my dog Blaze. He is such a good boy that I thought I would share him with the world :) ! Happy printing. Works without supports.
Repair of broken hose for Husky central vacuum cleaner. For connection are used M5 screws. Print Settings Printer Brand: Prusa Printer: Prusa Steel Supports: No Resolution: 0,2mm Infill: 25% Filament: Prusament PLA Notes: It was printed…
Light diffuser for Husky 2200-Lumen Tripod LED Work Light. I made this to create better lighting for videoconferencing. I uploaded it in Thin 2mm thickness and Thick 3.5mm thickness in the front. I also added a STEP file if you want to…
A simple footing for Husky brand shelving to protect flooring from the metal plates.
This is a fork seal driving tool for use with 43mm diameter dirt bike forks. This was designed with WP dual chamber forks in mind, but will service numerous other fork types from KTM/Husky/GasGas. There are two lips designed into the seal…
This is a remix of thomaspsk Filament Spool Stand. I needed one more piece that was shorter than the original so the spool stand could be across the bottom of the Husky 20 Gallon waterproof storage container. For the same setup I have you…
Required Parts - 3in 3/8 Bolt (x2) 3/8 Nuts (x2) Washer (x2-4) Print 3-4 Walls for extra strength Shim slides into parts 1 & 2 : glue for extra bonding strength
Baby Dog Husky Clay character kawaii 3D Model
Fit a divider in the middle of a Husky Build-Out Large Tool Box using 3/4" plywood by printing these adapters. The dimensions of the 3/4" plywood is 11 5/8" by 8 1/2". The divider adapters fit into the plastic molding in the front and…
These 3D-printable accessories enable you to expand the functionality of the Husky Build-Out mobile toolbox system. The cleats and corners attach to the bottom of any flat surface, allowing you to securely lock custom work surfaces onto…
Als stolzer Besitzer eines weissen Siberian Huskys lag nichts näher, als ein solches Leuchtbild zu entwerfen. Das Bild wurde mit Lithophane Maker entworfen (siehe hier: https://tool.itslitho.com/CreateModel). Es wurde alles in PLA…
EDIT: some of the outer edge portions were not clearing the lid “lip” at coarse layer heights, so I redesigned them to be slimmer allowing the lid to seal better. These have SNUG at the end of the filename. So I originally had the HDX…
Insert for the accessory holder of the Husky central vacuum cleaner, which replaces the cracked original rubber.
Reduction for suction hole of triton dust collector bucket and husky duovac dust central dust collector hose. Inner diameter of reduction for triton bucket side is 32.5 mm Inner diameter of reduction for husky duovac hose is 35 mm
A simple mount for the Husky brand air compressor filter HDA70403AV. Attach to the filter with an M4x8 bolt and then to your surface with whatever length M4 hardware you need. I printed mine with 4 perimeters, 50% infill, 0.25 structural…
This has 7 slots for the following sizes: Imperial: 3/16 , ¼ , 5/16, 11/32, 3/8, 7/16, 1/2 Metric: 5 , 6 , 7 , 8 , 9 , 10 , 11 Single file for both sets. Please read Version Notes. Label: A receptacle for the “size label” is at the tool…
Made to fit into all 3 drawers of the 3 drawer (HKY22856) or the top drawer of the 2 drawer (HKY22855). Print all four parts and glue together, glue might be optional based on containers going into the box, is a snug fit. Added Note,…
Adapters for creating dividers in the bottom drawer of the Husky Build-Out 2-Drawer Tool Box using 1/2" or 1/4" plywood. These allow you to divide the bottom drawer into vertically or horizontally. There are two types of dividers for…
I installed the Husky 46" Steel pegboard designed for the rolling workbench onto my 46" wide rolling Husky desk (really solid, I love it), and I wanted to add an additional shelf on top that would be sturdy enough that I wouldn't need to…
This Tray is for the Husky 3/8 in. Drive Master Bit Socket Set (37-Piece) Model # H3DBS37PC this also holds the short and long husky bit adapters. The two rows that are raised are to lift the bits into the pockets of the lid to help hold…
These accessories allow you to expand the functionality of the Husky Build-Out mobile toolbox system by adding custom attachments to the bottom of the toolbox. The cleats and corners securely mount to the underside, enabling you to attach…
This Husky Statue features a sleek and modern design with smooth contours, making it an easy print for most 3D printers. The model is ideal for display on a desk, shelf, or as a thoughtful gift for dog lovers. Best Print Settings:…
I have a large number of Husky Stackable 6 in. Click It Bins and I needed a way to transport them while keeping their contents secure. To solve the problem I created a locking cover that fits over the bin and provides access to the label.…
Huskylens cover take an M2 screw for the hinge. Or try to use filament instead I added a mockup of the camera as well This design is still in progress.
Description A simple foot designed for Husky tool cabinets that replaces the stock casters. Turn your Husky tool cabinet into a stationary cabinet while also reducing the height by about 12.5cm! A great way to modify a Husky cabinet for…
This holds a Husky brand Coping Saw. the shaft it rests on is 8mm (.3in). it slides in from the back side. I'm going to make a few more and will create those to be opposite side. it has a 10mm opening for the blade ferrule. The back…
Very basic and quick print, designed so that you only need to lift the screwdriver a little bit to pull it out, rather than lifting completely. Print flat, no support. Firm press-fit into an HSW insert. Screwdriver model:…
A clip for a model of the plastic Husky ¼ inch socket rail, with a trapezoidal profile. Rather than buying another socket rail for just two more clips, I decided to design these instead. There's another model with a curved top on the Home…
Hike! is a game of dog sled racing. This meeple can be used to represent dogs as you organise your sled prior to racing. https://www.kickstarter.com/projects/1485795534/hike-a-card-drafting-racing-game-with-huskies Don't forget to add the…
Violet Husky 3D Printed Bookmark – HueForge Multi-Color Design 🐺💜 ⚠ Note: Model may appear black in the preview but will show all beautiful colors after slicing with proper filament swaps! Show off your love for majestic pups with this…
Husky Lens mount for the XRP robot. CAD is Open Source on OnShape . Special thanks to Cornel Cup Robotics for this design.
I designed this to just slide up to lock it in place using the original screw. You install it by aligning it to fit within the slots, then just sliding it up to put in the screw. It has a keyway that locks against the sheet metal to lock…
Had a few parts bin go missing and a couple needing replacement so modeled a suitable replacement. Includes base ledge which stops them from sliding. Printing print in orientation shown (bottom on plate) enable tree supports (just on…
UPDATE 12/28/25 - As suggested by @Dave_266312 and others, I have replaced the original integrated Desiccant Container with a new Desiccant Container Holder and separate Desiccant Container. Also added is V4 of the original model which…
The Husky Roof Rack is a modular, 3D-printed system designed to make transporting heavy items on top of Husky toolboxes easier and safer. It features seven 3D-printed supports and four custom TPU grips that connect with PVC pipes and…
Remix of a screw driver holder. 3 prints are needed for the set.
