Counting matching models…
This original design puzzle box, with hidden latches, sliding panels, a mystery dial, and covered with runic symbology, is the perfect place to keep your most valuable keepsakes safe (from anyone without a hammer). It requires just the…
All related data and arduino sketch in: https://github.com/Menyiques/Enigma Printed on PLA on a MK3S with MMU2S. Working video: https://www.youtube.com/watch?v=k2SRl5kKgS8
I printed the sculpture little bit bigger than in .stl . As a template, I used sigma squidward. Enjoy your printing, and a enjoy moai! And don't forget to follow me for more models;}
I had an issue like many other with the X gantry on my neptune 4 max got out of wack from shipping. This will help you to realign the X gantry.
The mount holds the bike light in a snug fit. Use M3x4 screw to fix the light in the mount (optional, but recommended). Due to the tight fit, PETG is recommended (Also because of the dynamic loads on the part during driving) Printing in…
I modified the frame, specifically the ball joints for dummy 13 to be used when printing over 500%
WARNING: This is a CHALLENGING project. You will need a well-calibrated 3D printer, and the patience to handle a lot of very fiddly small screws. This replica model is based on accurate blueprints and measurements from an actual World War…
WC Pusher Plate (Drückerplatte), compatible to Geberit Sigma I accedentaly bought a Delta pusher and had to fit it to a Sigma backend. Instead of returning it and getting a fitting (and more expensive one) I made a Sigma-compatible pusher…
A set of gaming tokens or markers for use in table top gaming. This set is part of series of releases with similar dimensions that allows for multicolor printing with a simple layer switch. This set is for the game Age of Sigmar, and was…
Adapter for Geberit Sigma Flush Plate on UP100 Cistern The Geberit UP100 is a popular concealed cistern model. However, its compatible flush plates often lack the aesthetic appeal of the Sigma series. Unfortunately, Sigma flush plates are…
Adapter for toilet module GEBERIT DELTA. You can use the GEBERIT SIGMA buttons. Instructions: remove DELTA button remove black frame and parts add adapter frame and new parts use spring and blue wedges add new SIGMA button Printed on…
Figment, a small purple dragon, is the mascot of the "Imagination!" pavilion at the Epcot theme park at Walt Disney World Resort. Dreamfinder, a jolly wizard-like scientist, teaches Figment how to use his imagination. Figment is meant to…
These are the runes of the runeword Enigma "Jah - Ith - Ber" from Diablo 2.
I had the porblem that my bicycle lamp sigma aura 100 was mounted on my handlebar and it did shine onto the garmin navigation device. I had the opportunity to mount it under the mount with a GoPro-Mount. So I designed a holder for my lamp…
This holder serves to assemble of IPA pigment filter. You can purchase the IPA pigment filter here: https://www.prusa3d.com/product/ipa-pigment-filter/ A detailed guide on how to assemble the IPA pigment filter can be found here:…
I wanted one, so I made one. Not scaled, sizings eyeballed, but it looks pretty good and is decently accurate to the geometry I could see without having the models themselves. This includes the inner face of the orb. The model is around…
Garmin/Sigma Rox 11 mount above stem Again another Gramin / Sigma Rox 11 mount for a handlebar diameter of 31.8mm. I Designed this for my own needs (fits perfect over a canyon v12 stem) so i hope it fits for you. It's easy to Print but…
Revised version of my simple foot mount which supports alignment of the 500x500 honeycomb bed and keeps everything in the same place. Need to print 2 of each. Filenames explain which ones are for which feet My feet are positioned at their…
Mount a light to a gravel bike upside down is not as simple as thought. The solution to my SIGMA Aura 80 light was to design and print a bracket to mount it beneath my QUADLOCK out front mont via a gopro adapter. Print upside down (flip…
PRINTING SESETING: MATERIAL: PLA, PETG, ABS, ASA SUPORTS: Normal ADESION: YES
What a frustration not to be able to simply detach the lamp from the handlebar without removing the whole mount. So, I designed a sturdy mount that can be attached to a GoPro mount. This mount considers physical constraints, so the…
Simple model made in tinkercad, can be resized with some trail and error. Made so i can play some 9th age with me bois after 40k got too anoying. I printed it with some crappy PLA and 0,3mm layer hight, wouldn't invest any more in it.
Printed in PLA with 4 perimeters - 2-piece print without support (One-piece print also attached, but more complicated to print) Combine parts with glue and screw tight (in the correct orientation) 10mm M3 screw used also find my Print in…
A points tracker for Age of Sigmar Spearhead. Points broken down into victory points and battle tactics. Fits 16mm dice. Printed with Polymaker marble PLA with ironing.
Just a little plastic piece from a Sigma Aura 60 Lamp (Mine works fine after 1 year of using it) Print Settings Printer: custom kinda Anet+ kinda E3D+ Rafts: Doesn't Matter Supports: Yes Resolution: 0,4 Infill: 100 Filament: Old stuff PLA…
I created this lens hood because the stock one did not allow me to install a magnetic filter ring on the lens.
An other mount for my Sigma Rox 11 (Garmin Base). This time for the Canyon G5 Stem . You need two M3 countersunk screws ... i used my dermel to shorten them. Design is basd on an other mount from Lars Vogelenzang but build from scratch.…
use this print so you can use your Pigma Micron markers in the Cricut Joy Plotter. I used 100% infill, but less will do I guess
Remix of original short and long latches with 2.5mm pins.
I've knocked these together very quickly for the new edition of AoS, but would absolutely be compatible with other games. The central circle is 40mm in diameter, and the outer edge of the larger circle sits 3-inches away - no need to…
For 6 citadel paints and 3 brushes
A Perfect fitting Lens Hood for the Sigma 17-50 f2.8 Tested on a A1 mini
A points tracker for Age of Sigmar Spearhead. Points broken down into victory points, battle tactics, and points from twists. Fits 16mm dice.
Needed a mount for my new bike and since there was no space on the saddle pole left for the default BLAZE mount, I decided to design one. The BLAZE light snaps into the mount, so no extra fixation is required and it can easily be removed…
Handlebar mount for the sigma buster light. I recommend to be printed in ASA. I used a mix of ASA for the main body the grey pieces and a PC for the black. ASA is better for the flexibility and pc for rigiditity. But just ASA/ABS will…
Keyrambit spiner do kręcenia kluczami. additional elements:https://allegro.pl/oferta/lozysko-kulkowe-61803-6803-2rs-17x26x5mm-15713802966 material: PLA, PETG, ABS, ASA infil: 40% supports: NO
MMU version of Figment Figment, a small purple dragon, is the mascot of the "Imagination!" pavilion at the Epcot theme park at Walt Disney World Resort. Figment is meant to be the literal embodiment of the phrase "figment of the…
Whistle in a moai head, simply the chaddest whistle in the world
Sigma ROX4 Speedometer Holder for fix with cabel ties
This is a small mod that can be screwed to the back of the Sigma 18-35mm f/1.8 lens that makes the image appear like that of an anamorphic lens, mainly by elongating the bokeh. This effect can be seen pretty clearly in this video by "We…
50mm Version des tollen Aero Lenkerhalters für Sigma ROX GPS 11.0 von CBiker (https://www.thingiverse.com/thing:2612827). Die Verbreiterung war Notwendig wegen Umstieg auf 48mm Lenkerhalter. Zusätzlich wurde die Lenker-Fixierung leicht…
Enjoy this Sigma/ Troll Face keychain! You can use it to add a hint of personalisation to your belongings, pin it to your shirt as a badge, gift it to somebody, and many more! Please note: This is an AMS version if you would like to print…
Dimensionally accurate 3D scan of A6400 & Sigma 18-50mm Some surfaces were unable to be scanned correctly, however overall shape is accurate. Basic mesh repaired model provided, however the repaired surfaces may not be accurate.
I had problems positioning my Sigma Aura 60 light straight on my handlebars because of space problems. So I came up with the solution of hanging it under my Garmin Edge mount using a GoPro-Adapter. So I designed a holder for my lamp to…
Mimigma hat sich einen Kürbis übergestreift! dieses Modell hat mehrere Teile um es gegebenenfalls mit Lichtern auszurüsten. Leider habe ich kein MMU und musste es anmalen (ich gelobe Besserung). Verwendet beim Druck unbedingt Stützen! Ich…
This is a lens hood for the Sigma 170 to 500 telephoto lens. This is the second lens hood I designed for myself, and yes, I'm pretty hard on my cameras and equipment. Most of my glass is Nikon, and it is easy to get replacement parts for…
Bracket to attach the SIGMA bubble tail light to a GoPro Mount. The advantage of this holder is that the SIGMA Blaze does not need to be modified. The original side "wings" which serve as rubber holders of the original attachment, do not…
Changelog: 2023-03-16: Added new version for handlebar diameter 25.4 mm, as requested (offset 21 and 22 mm). Changelog: 2020-11-24: Added new version with 5.0 mm offset, as requested. And changed file names according to screenshot…
Ever been annoyed by the mount that came with your nice and bright Sigma Aura bicycle lights? You just cannot detach the light from the mount, instead you need to remove the whole mount. When you attach the mount, you have to align the…
This is a simple Christmas ornament for the Delta Sigma Theta sorority.
This is an aligment tool for centering the clutch of a Hyundai Tucson 2017 1.7CRDi 2WD MT. It can surely fit for other models. My clutch was perfectly replaced with this aligment tool!
I wanted a printable pump clip that didn't have layer line weaknesses, so I designed the horizontal clip for myself. A couple other diabetics requested variations. Print Info All print without support, enable bridging in your slicer if…
Unlock the thrill of the unknown with our Mystical Cube Labyrinth! This captivating puzzle cube houses an intricate maze that challenges your wit and patience. Maneuver your marble through the twists and turns, solving the enigmatic…
After printing, you have to glue all parts together. To attach the mount to the backpack you still need double sided, 10mm wide velcro.
It is a coding/decoding "machine" that I designed from scratch for an Escape Game (my very first design). Each wheel has a different number of spokes (2, 3, 4 or 5) that gives numerous possibilities in the game: 2 and 3 spokes wheel:…
This is a replacement lens hood to fit the Sigma 18-35mm Art lens. The lens is 72mm thread but I use 77mm filters with an adapter. With the adapter it wasn't possible to still use the stock lens hood. I created this hood so that it can…
a model of the 3s LEITNER Gondola
An other mount for my Sigma Rox 11 (Garmin Base). This time for the e*thirteen Base (40mm) Stem . May be usable for other stems too. You need two M3 countersunk screws ... i used my dermel to shorten them.
It is a small keychain that i printed at 80% infill and it came out well, attached with a carabiner.
A simple design film digitizer I have made in fusion, works great. This design was made for 18-300mm Sigma Macro Lens (No idea if you can fit it on another lens so keep that in mind) Extension tubes are required for being able to focus so…
Sigma Aura 100 gopro Halterung /Sigma Aura 100 Gorpo mount
Dieses Modell ist eine Halterung für das SIGMA Blaze Fahrradrücklicht mit Bremslichtfunktion. Die Halterung wird mit einem Verschluss an die Sattelrohrschelle befestigt. Das SIGMA Blaze Fahrradrücklicht wird von oben in die Halterung…
TRABAJO EN PROCESO Con este upgrade convertimos cualquier SIGMA a filamento de 1.75, usa extrusores Titan y Hotend V6 de E3D Original. Hemos respetado todos los componentes originales de la impresora, los ventiladores, el termistor y el…
Remix of: GoPro quick release two-part clip by parkis Sigma Mount Piece by ENKI
I recommend printing this with a high density and in the orientation displayed in the photos. Also Known as the Paradigm 2090000015
Sigma profile 20x40mm for ur test projects
Better Version of the bike computer holder. You will just need two M3 srews (10-12mm) an two M3 srew nuts. Fits for handlebars with 31.8mm diameter. Just use the original base and screw it to the holder. Printed it with Sunlu PLA+. You…
Für meinen Vater habe ich diverse Bahnsteige und Muster designed, die möglichst nah am Original gehalten sind. Hier veröffentliche ich die Version 2 in 55mm Breite. Die Muster sind so angelegt dass sie beliebig in der Länge aneinander…
A pen holder that uses the pens clips to stay in place, so you know what size you’re getting, kept the filament and size to a minimum, had enough of the flimsy packaging these fineliners came in. If you have solidworks you could change…
Für meinen Vater habe ich diverse Bahnsteige und Muster designed, die möglichst nah am Original gehalten sind. Hier veröffentliche ich die Version 3 in 45mm Breite. Die Muster sind so angelegt dass sie beliebig in der Länge aneinander…
I wanted a fun way to identify my printers so I created this Figment door handle model and a Stitch door handle model to replace the default Bambu Labs door handle on my X1 Carbons. I hope you all enjoy it as much as I do! Stitch door…
Alignment tools made for Losi Mini B but likely work with others. 8 mm hex with 4 mm shafts. Started with using calipers or ruler to measure toe and camber, then i added the levels from amazon.…
Réplica de una Máquina Enigma (funcionamiento manual) con tres rotores intercambiables. Con ella podrás cifrar y descifrar mensajes a partir de una palabra clave. Disfruta con este diseño de la Máquina Enigma modelo Ω . Se adjunta…
Replacement goPro mount adapter for Sigma Buster 1000 light with a spring lever to optimize longevity
The original Tripod clamp was just too expensive so my friend and I designed our own 3d printable mount that is as sturdy and rigid as the original one. The hole thing is ArcaSwiss compatible as well. It is made up of 2 parts for better…
I managed to get a second hand Sigma DP1 and DP2 Merrill for quite cheap, but realised that the LCD was quite useless in bright light. I managed to find a design on thingiverse which did exactly what I wanted, but the design required…
Hello, news from me with a usefull pigment holder
This is an actuator for the XRP platform that allows to take and move objects on the floor, and adds a lot of personality to the robot. This model was designed to be used in robotic competitions, such as the FIRST robotic competition,…
"Dive into the depths of the mind's paradoxes with our Freudian-inspired bookmark, the FreudMarker. Just as Freud explored the complexities of human behavior, the Freudmarker bridges the gap between surface-level reading and the hidden…
A dice/marker for indicating which type of Mysterious Terrain each piece is for Age of Sigmar.
A simple holder for my model making pigments, to avoid having them all over the place when I'm not using them. It's a 4x3 design, with space for bottles up to 35-36mm in diameter (based on your printer tolerances). Tested and working…
I designed this spool to fit a 75mm D3D Sigma filament refill using minimal filament to make. The slots in the outer spool make it easy to load the filament before cutting its zip ties. The SCAD files are included to provide a starting…
Hi, this is a clip to fit the SIGMAR NUGGET II bike light to the SELLE ROYAL ICS sattle system. First print both split parts “right" and "left” (70%infill 3 perimeters) connect the rubber band of the NUGGET II to the clip push the clip…
I liked the design of the square hoods for the fuji cameras, so decided to replicate it for the lens I have. I've not seen much vignetting with the lens, but haven't tested it fully so can't guarantee it is vignette free.
I bought the lens second hand and it came without the lens hood, so I designed a replacement. The field of view isn't obstructed at all, and you can still (barely) access the focus ring with the hood reversed. I printed it at 0.2mm with…
A simple rotate and snap-in solar mount for the Sigma 150-600MM F5-6.3 DG OS HSM | C. This fits in just like a lens hood. Just clip your solar filter on the edge of the mount. Easy print, no supports needed.
Super poseable Sigma action figure, armed with removable laser daggers and forehead laser beam! Comes with two sets of hands. His double-jointed knees and elbows allow for a lot of dynamic poses. Stands almost 19 cm tall and scales well…
Here is a battle box of my own design which I use to store most of my parts for Age of Sigmar games. The box is a simple stacking system which comprises the following components: A large dice tray which houses the other components. I have…
Figment is a small, purple, dragon-like creature who serves as the beloved mascot of Epcot's Imagination! pavilion at Walt Disney World. Created specifically for the "Journey Into Imagination" attraction (which debuted in 1983), Figment…
After reading an entry on the PrusaPrinters blog about photography, I realized that I can solve a problem I had for a long time. I have had a Sigma 10-20mm lens for many years, but broke my lens hood a long time ago. I could not find a…
A Short Holder for the Figma Blaze rear light that fits the Fizik Saddel clip
I wanted a rear light for my old MBK Mirage that light up when I go through a tunnel and when I pull the breaks. The Sigma Blaze does it perfectly. You'll find what you need to plug it under the saddle with two serflex. NB : this bicycle…
Makes it easy to flush again when your Geberit Sigma 70 plastic part breaks(and it will!) You can print it however you want, i would recommend PETG but i did not have some myself.
To align my homemade CNC I need a tool to align an MGN15H rail to a 2020 extrusion. Here it is
Want to bring Figment with you on the go? Need a friend to remind you to use your imagination? Well, this is the straw topper for you! A remix to create a simple straw topper. Print with supports for the mouth. Print Settings Printer…
Figment jamming on a guitar Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Mount for your Sigma cicycle computer (Rox 12/Rox 11 evo/…) at a vertical surface with 2 srews. Use screws mit a head of 8mm. I am not shure, if its necessary to print it with brindges. I put the g-code data in the attachment with…
Lens hood LH927-02 for the Sigma 85mm f/1.4 Art lens
