6,843 models
HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Mini 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Santa Hat now available! Download it here! A base/diorama builder is now available for download for this mini figure model! ___________ IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS Please note that I am sharing my designs to any one to…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
Made possible by my amazing Patreon supporters! If you like my work and want more models and pre-supported files for resin you can support me in Thangs This model is support free BUT i recommend you use a support pillar right next to the…
Print approx. €8.95–€10.93 excl. taxPreliminary estimate for one variant
Easy 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
How Xenomorph is made - https://youtu.be/Upa737w-dKQ
Print approx. €9.94–€12.15 excl. taxPreliminary estimate for one variant
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
WARNING: Contains small parts. Not intended for children below 3 years old. Santa Hat now available! Download it here! Printable assembly guide now available for download. A base/diorama builder is available for download for this mini…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Welcome to OpenFigure3D! This is our first fully 3D-printable articulated figure: Iron Man MK3 , as seen on the first MCU movie Iron Man of 2008. The designer is Dany Sánchez , who is also behind MiniWorld3D . Further below are the full…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
NOTE! Im not affialted with Pokémon in any way with this model. I tried making Pikachu from Pokemon with makerlabs printmon it is cute so go print it if you want the 3mf version also has multi color for the AMS from Bambu Labs You need to…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
This is a Iron Man action figure. Print with PLA The need for model paint
Print approx. €5.55–€6.78 excl. taxPreliminary estimate for one variant
When we started to hand out our printed face shields to the hospitals, we found out they had a incredible additional benefit. They incredibly lifted the mood of the medical staff , realizing how deeply people care about them. So we teamed…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
Alien - Xenomorph - Full Figure - support test from twitter joseph prusa account original from https://www.myminifactory.com/fr/object/3d-print-alien-xenomorph-full-figure-25-cm-82660
Print approx. €13.52–€16.52 excl. taxPreliminary estimate for one variant
Update 2024 April There are two new G-Code files. First of all they now have the seam on the back. Also I added one with 0,1 mm layers so you have that at hand. Also while being at it I fixed the bases of the models, all STLs now have a…
Print approx. €4.16–€5.09 excl. taxPreliminary estimate for one variant
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
A very simple stand, designed to not obscure your figure very much. Designed specifically for the figure pictured, but a very simple modification to the length of the strut would let you adapt it to any height. You'll need two braces per…
Print approx. €4.56–€5.58 excl. taxPreliminary estimate for one variant
Avoid twists and tangles by winding with a figure eight pattern. Scale print as desired. I recommend PETG over PLA to avoid warping with usage in hot weather. October 2022: revised model to remove one hole (the original version broke…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
The most meticulously organized Lego Star Wars collection A complete list of 55 Star wars factions available to download: At Attin Black Sun Bondsman's Guild/Bounty Hunters Churches of the Force CIS Separatists Clan Djarin Clan Fett…
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant
Fully movable huge Lego Figure as a toilet paper roll holder Scale ~10:1 individual movable arms, hands, legs and head (depending on your printer settings & quality you should use different shoulder parts to ensure the arm is turning…
Print approx. €16.16–€19.75 excl. taxPreliminary estimate for one variant
Figurka na klasickou hru člověče nezlob se. Tisknuto z PLA a Wood filamentu.
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
I Remixed The Model for faster print less trash and user without MMU or any other Multicolor Setup
Print approx. €7.39–€9.04 excl. taxPreliminary estimate for one variant
Print “Lego_Stud_Diameter_Test” first, test it and choose the right diameter size for your display stand models. Every display stand model comes in three different stud diameters (4,9mm 5,0mm 5,1mm) and in two versions (stud compatible…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Update 2024 April There are two new G-Code files. First of all they now have the seam on the back. Also I added one with 0,1 mm layers so you have that at hand. Also while being at it I fixed the bases of the models, all STLs now have a…
Print approx. €4.15–€5.07 excl. taxPreliminary estimate for one variant
This is an action figure (easy printable)
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Christ Figure Plaque / Pendant
Print approx. €5.98–€7.31 excl. taxPreliminary estimate for one variant
originally by @Stigern
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. 3D scanned version Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports,…
Print approx. €15.95–€19.50 excl. taxPreliminary estimate for one variant
ARL-99 HELLDIVER From the Japanese multi-media franchise PATLABOR: The Mobile Police, the ARL-99 HELLDIVER is a Labor used by the Japanese Self-Defense Ground Forces, manufactured by Shinohara Heavy Industries. The OpenFigure3D version…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Venus Figure ofLangenzersdorf
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
Hello, simple Bearbrick figure. Thanks for your download, enjoy the print!
Print approx. €5.12–€6.26 excl. taxPreliminary estimate for one variant
Henry snaps together and his eyes can be posed. The gcode for his eyes contains a pause to facilitate the color change. All my models are free to download and remix. If you appreciate them, please leave a download and a like!
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Printed without supports on 0.4mm nozzle with 0.3 layer height, 4 perimeters can be connected with classic LEGO 2x2 plate also included as spojka.stl
Print approx. €7.78–€9.51 excl. taxPreliminary estimate for one variant
Print your own AstroToy Tourist to take with you on your adventures (my first 3D model, designed in Blender)! This is a free version of The Tourist you can print at home with the colours you like. Head remains rotateable in the final…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Hello, seated puppy. Thanks for your download, happy printing!
Print approx. €5.35–€6.54 excl. taxPreliminary estimate for one variant
A simple ghost figure that can be printed without supports or placed only in places where mouths and eyes are used. Definitely a pleasure as a decoration for children in the room or on a hellowen holiday. Or as a toy for children.
Print approx. €4.36–€5.32 excl. taxPreliminary estimate for one variant
Figure holder for Karak 2. The model is printed from PETG material, which is more flexible. The model is printed on a PRUSA MK3S+ printer and I offer STL, GCODE and 3MF files for everyone to choose as needed.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Inspector Clouseau figure from Pink Panther. Thanks for your download, enjoy the print!
Print approx. €6.77–€8.28 excl. taxPreliminary estimate for one variant
You are probably a Lego fan if YOU tapped this model. This model is an accessory for Lego minifigures across the world allowing them the freedom to work out and get jacked. If you made a Lego model gym, it would be perfect for it! Please…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
20% infill 0.25 mm layers no supports PLA works perfectly
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
I designed this hexagon-based stand to display a full set of 12 Lego collectible minifigures. There's space around each minifig to display the various accessories that often accompany these collectibles. Printed with Polymaker PolyTerra…
Print approx. €6.02–€7.36 excl. taxPreliminary estimate for one variant
I made this 3d model with AI, then I modified it to print it in multicolor, I recommend putting supports in all places
Print approx. €6.22–€7.60 excl. taxPreliminary estimate for one variant
Hello, Emilio - the thicc dog figure. Thanks for your download, enjoy the print!
Print approx. €5.12–€6.25 excl. taxPreliminary estimate for one variant
Hi, respectful Hulk Hogan wwf figure. Childhood icon. Enjoy!
Print approx. €5.08–€6.21 excl. taxPreliminary estimate for one variant
Just finished Bomb Rush Cyberfunk and completely fell in love with it. So I decided to make a model for fellow fans and 3D print enthusiasts! I will probably update this at some point with more accessories (Boost pack, skateboard, bike,…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Kids broke the base for the figurines of the Ravensburger Labyrinth Board Game. Quickly designed this alternative in Blender. It should work for other themed board games where the paper is the same (aprox. 1mm thick). I've printed it…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Hello fellas, simple Kaws x Megaman / Rockman figure to enjoy. Ran out of blue filament. Thanks for your download, happy printing
Print approx. €4.56–€5.57 excl. taxPreliminary estimate for one variant
Šachové figurky pinčlíka, věže a koně. Kompatibilní hlavně s nástěnnými magnetickými šachami. Tisknout z PLA nebo PETG.
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…
Print approx. €41.83–€51.12 excl. taxPreliminary estimate for one variant
Hello! Astroboy skating figure. Thanks for your download, enjoy the print!
Print approx. €6.58–€8.04 excl. taxPreliminary estimate for one variant
flat chess figures - height 5 to 7 cm with a magnetic cell inside (2mm * Ø10mm)
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…
Print approx. €26.20–€32.02 excl. taxPreliminary estimate for one variant
I will update it when I can calibrate and slice better. Use 0.15g filament
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Passend zum Schulanfang gibt es einen kleinen Benchy-Remix: Ein Benchy als aufsteckbare Stiftfigur - das Penchy. Dank des leicht konisch zulaufenden Einstecklochs ist es für diverse Blei-/Buntstifte, Fineliner und viele andere Stifte…
Print approx. €2.33–€2.84 excl. taxPreliminary estimate for one variant
Eine modulare Waben-Displayzelle, die entwickelt wurde, um Ihre Minifiguren stilvoll zu präsentieren! Jede sechseckige Zelle misst 60 mm im Durchmesser und verfügt über eine zentrale Plattform, die perfekt dimensioniert ist, um eine…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…
Print approx. €33.85–€41.38 excl. taxPreliminary estimate for one variant
Lucky 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Santa Hat now available! Download it here! A base/diorama builder is now available for download for this mini figure model! ___________ IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS Please note that I am sharing my designs to any one to…
A base/diorama builder is now available for download for this mini figure model! ___________ IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS Please note that I am sharing my designs to any one to enjoy but for personal use only . I have NOT…
This is a big toy human figure . I spent a lot of time making this model from scratch to match the original design while making tweaks for tolerances, printability, and strength. While there were a number of brick figure models I found…
This is a cool model of a gorilla tag monkey. for best printing results print at a 45 degree angle on his back and add supports, be gentle removing the supports so you don't damage the joints or fingers of the model, and give it a good…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
More design on: https://www.patreon.com/c/mortex3d PATREON: Mortex.3d INSTAGRAM: Mortex.3d
Introducing our newest creation: the Articulated Forest Dragon! 🐉 Embark on an enchanting adventure with our intricately designed 3D printed toy, perfect for young explorers and dragon enthusiasts alike. Now available in a convenient…
A print-in-place figure of Optimus Primal from Transformers: Rise of the Beasts. Created by Nikko Mendoza.
Santa Hat now available! Download it here! A base/diorama builder is now available for download for this mini figure model! Download the different tiles here for the Enderman to carry around! _____________ IMPORTANT NOTE ON COMMERCIAL USE…
Introducing the Loftyo figure! The incredibly articulate, insanely expressive action figure for displaying, playing, and animating. This figure is the result of five basic craft prototypes, hundreds of hours spent learning blender and 3-D…
This Bowser/King Koopa statue is free-standing, game-accurate, and a great display piece. Printing Guidelines The STL file has each part in a position that allows for the supports to be removed as easily as possible, and for the quickest…
Introducing our newest creation: The Adorable Bamboo Panda! 🐼 Embark on a journey of cuteness with our charming, chubby panda keychain, designed to capture hearts and bring smiles wherever it goes. Crafted with love and attention to…
I printed this model on my Bambu Lab P1S using eSUN PLA+ filament, 0.4 mm nozzle, 0.16 mm (0.2 mm for low-poly) layer height, 2 wall loops, 15% infill, automatic slim tree supports at 25 deg. threshold and on build plate only. Since…
Awaken the Elder Bone Dragon Ancient. Fearless. Undying. 💀🐉 From the ruins of forgotten kingdoms, the Elder Bone Dragon rises once more. Vast, intricate, and hauntingly beautiful, this fully articulated flexi figure is a larger, more…
A base/diorama builder is now available for download for this mini figure model! ___________ IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS Please note that I am sharing my designs to any one to enjoy but for personal use only . I have NOT…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
This compact Labubu-style keychain is a fun and adorable character figure, designed to fit perfectly on your keyring, backpack, or even as a small shelf buddy. Printed in vibrant silk or matte PLA, the stylized figure has strong visual…
Modulares Regal für Toniebox-Figuren. Die einzelnen Waben wurden vollständig neu aufgebaut und bieten jetzt einige Vorteile: Dünnere Wände, damit deutlich besseres Gesamtbild Unsichtbare Verbindung, an der Front sind nur die Kanten der…
Discover the charm of our adorable Tardigrade figure, perfect for biology and microbe enthusiasts! 👩🔬🦠 This file includes an STL with a keychain hole and one without for your convenience. Best printed at 0.2 mm layer height, it's still…
Dive into the enchanting world of our Axolotl figure, a must-have for aquatic enthusiasts and biology aficionados! 🌊🔬🦎 This 3D printable model comes with both an STL featuring a keychain hole and one without, offering flexibility for your…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. This…
Elevate your Halloween decor or add a quirky touch to your home with this unique skeleton figure, stylishly dressed in a hoodie. This model serves as an excellent decoration piece or a fun, eye-catching print for enthusiasts. This model…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Print with supports! Also no platform is included.
***Updated: 06/15/2023 Added step model from ETP robot, for simple changes and for remixes of the model.*** Here you can find the first version of the " ETP-Robot , an easy to print, free moving action figure. The model is designed to be…
Introducing our coolest creation: The Articulated Ice Dragon! 🧊🐲 Dive into a world of icy adventures with our intricately designed 3D printed toy, perfect for dragon enthusiasts and lovers of all things cool. Now available in a convenient…
Hi if you really like this model you can remix this model or print it!
Introducing the Elder Wind Dragon – Graceful. Untamed. Ever-Moving. 🌬🐉☁ Born from the highest peaks and carried by endless skies, the Elder Wind Dragon glides silently through the clouds, commanding storms with elegance rather than force.…
Summon the Terror of the Bone Dragon! 🐉💀 Hauntingly elegant and cloaked in spectral silver and icy white, the Bone Dragon glides into your collection like a forgotten guardian of ancient catacombs. With its skeletal frame, chilling bone…
Introducing our adorable new creation: the Articulated Kitty Keychain! 🐱 Step into a world of charm and playfulness with our meticulously crafted 3D printed kitty companion, perfect for cat lovers of all ages. Now available in a…
Watch here for more information! It's time for the classic Ace Pilot Snoopy! This is a 3D modeled and 3D printed version of Snoopy's Pilot form with his house. Hope you like it! Let me know what you think. :) Modeling Software: ZBrush…
WARNING: Contains small parts. Not intended for children below 7 years old. A base/diorama builder is available for download for this mini figure model! _____________ IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS Please note that I am…
More design on: https://www.patreon.com/c/mortex3d PATREON: Mortex.3d Guess who just sprouted into the cutest print of the day? 🌱✨ This little bulbasaur is fresh off the printer and ready to steal hearts! Who else would totally adopt this…
After printing hundreds of originals, I decided to re-model it myself to make some small tweaks and changes. The original OpenSCAD code resulted in slightly misaligned tolerances, needing the tolerance to need to be set higher than…
A base/diorama builder is now available for download for this mini figure model! ___________ IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS Please note that I am sharing my designs to any one to enjoy but for personal use only . I have NOT…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
WARNING: Contains small parts. Not intended for children below 7 years old. Santa Hat now available! Download it here! A base/diorama builder is available for download for this mini figure model! _____________ IMPORTANT NOTE ON COMMERCIAL…
this is still in progress I will add a photo of my own soon and separate files for parts just in case something breaks
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint
Introducing the Elegant Sea Dragon! 🌊🐉✨ Dive into the depths of the ocean with our latest creation: the Elegant Sea Dragon! This beautifully designed and fully articulated figure captures the grace and mystery of the deep blue sea, making…
