240 models
This little helper works as a cell phone stand and shopping cart hijacker. Its printed in place and can be folded to be stored in your pocket. The print time only takes 37 minutes. You may need to carefully break the hinges free after…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Yet another shopping cart hijacker. Works in Germany with all shopping carts. Rescale with your slicer when you need a different size. Print in PETG for durability. Happy printing! Print instructions Easy to print. Print in PETG for…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
This Succulent Planter is inspired by pompeijan architecture. It has a little pool for excess water and an insert sieve to prevent root rot. I added tiny chairs and a tiny table mostly for fun, because they don't print very well. The…
Print approx. €8.88–€10.85 excl. taxPreliminary estimate for one variant
Halloween spirit, are you there ? For a lot of fun with friends or Halloween decoration ! Be careful, I do not take responsibility for the spirits that may have lapped in your places ! Print with no MMU.
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
أهلا بك في المملكة العربية السعودية 🇸🇦 Welcome to Saudi Arabia! This model was originally created by Dany Sánchez . Rijal Almaa or Rijal Almaʽa ( Arabic : رجال ألمع) is a village located in the Asir province, in the southwest of Saudi…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
A very Nice to Paint DaD Warrier FDM Nosupport as it is Presuported
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
This is a model of famouse school in city of Mostar called Gymnasium Mostar.
Print approx. €10.62–€12.98 excl. taxPreliminary estimate for one variant
Ya no podía destrabar la manija para llevar mi carry-on asi que la desarmé y me fijé qué tenía roto. Arreglé el botón e imprimí uno nuevo. Lo imprimí en PLA con soportes para que la cara visible del botón quede bien plana. WIP: Estoy…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Stopper for shoe cabinet Measures: Inner width 8 mm Inner height 11 mm Outer width 10 mm Outer height 16 mm Total height 27 mm Printed with PLA+, without supports, 235º nozzle, 65º bed, 200mm/s speed. Fijación tope para zapatero Medidas:…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Se imprime en dos partes: la Base y la Tapa. Una vez impresas se unen con pegamento. La antena encaja con poca presión en el soporte. NO requiere soportes. En la parte trasera de la base se coloca cinta doble faz para fijarla a la…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
🇦🇿 Welcome to Azerbaijan! This model was designed by Faiz Kamel @churnwalker21 The Heydar Aliyev Center is a 57,500 m2 (619,000 sq ft) building complex in Baku, Azerbaijan designed by Iraqi-British architect Zaha Hadid and noted for its…
WHY? The existing AMS dryer pods by STprinting are great for the outsides. For the middle slot, I needed something to fit my Xiaomi Mija Hygrometer , of which I had a couple lying around. UPDATE v2 Based on your feedback, I strengthened…
Just a fun little project I did to make a gift set for somebody.
I saw @JohnAustin_465615 ‘s amazing Halloween Coffins model and was wowed by the design. But the original models were designed for use in a multi-material capable printer, specifically printers from Bambu. So I remixed them to be…
While I liked the original design, I have closed of the grates behind the hygrometer to isolate it from the silica gel. By doing this hygrometer will not be influenced from the close proximity of the silicagels behind the grates. This…
Algunos modelos las paredes vienen un poco mas gruesas y algunas son finas. me di cuenta que algunos modelos (módulos) son mas grande que otros los marque con (ORIFICIO NORMAL) (ORIFICIO GRANDE) hay muchos modelos de tapas de balde de 20L…
Útil para usar pliegos de lija para lijado a mano
A remix of Kijai's lighthouse on a rock, exploded into separate pieces so that it can be printed in multiple colors. Tolerances and alignment pins are designed around resizing the parts by 225%. Color changes are intended for the railing…
otra manija para cajones, están las medidas en la foto se puede escalar según necesidad
Logo of Army of Bosnia and Hercegovina
Simple to make light box. The folder in the zip. file named ‘’front plate'' must be opened all files at once for multi color printing. File back box is to be printed separately. You are going to need some soldering skill. An USB wire…
🔧 Soporte para llaves fijas: Orden y eficiencia en tu taller 🔧 Si eres un amante de la mecánica o del bricolaje, sabes lo importante que es tener tus herramientas organizadas. Este soporte para llaves fijas no solo mantiene todo en su…
Yet another removable token for shopping carts no fuss version size: 1,- € Print instructions Category: Household Print Settings Rafts: No Supports: No Infill: 20% Honeycomb Filament: Generic PLA Notes: Doesn't really matter how you print…
Baku City Circuit, Azerbaijan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
Diseñe esta manija para repuesto de un mueble al cual se le rompio la original. Esta tiene de centro a centro de los orificios para los tornillos 129mm.
Its a board game named ouija board To play a Ouija board, sit opposite another person, placing the board on your laps or a table. Lightly rest your fingertips on the planchette. Ask questions clearly, allowing time for the planchette to…
Raktabīja translates to ‘Blood Seed’. He is an asura in Hinduism. According to the Puranas, he fought against the goddesses Kali and Chandi, both forms of Durga. Raktabīja had acquired a boon from Shiva that whenever a drop of his blood…
ENG: Due to the size, M2 threaded rods + M2 nuts, N20 motor (with gearbox), PLA print, glue are used. I wish you a lot of fun :) CZ: Použity jsou kvůli veliskosti závitové tyče M2 + matice M2, motor N20 (s převodovkou), PLA print,…
Lotus Evija Easy to print . Of course you can scale it the size you want, but don't print to small. I recommend 25cm length minimum. Easy to print for up to 100cm length, just cut it in some parts with the new slicer. I recomend a…
Are you tired of the same old teal Convipen? You're looking at an ultra-low-profile protective jacket designed specifically for your ConviPen auto-injectors. This jacket features a precision-engineered 42.6mm x 10.8mm viewing window that…
PLA or PETG as they are antibacterial and safe enough for food
This is a simple and minimalistic stand for the Xiaomi Mija Thermometer. The exact model of the thermometer is LYWSD03MMC, which uses a high quality temperature and humidity sensor and can be found for roughly 4,50€ on Aliexpress or even…
It is a manual sander of small size and useful for 3d impressions,Es una lijadora manual de pequeño tamaño y útil para
My truck camper's electric happijac corner jack caps (say that 5 times fast!) started cracking and going to hell. I didn't want water getting into the gearset so I modeled some new ones to replace the old crusties. The part number on the…
Since the sink in our bathroom is just not flat enough for our Xiaomi Mija foam soap dispenser, I created a bracket so it can be mounted to the wall instead. The design should be a perfect fit. Print Settings Printer Brand: Creality…
I looked through all the other Holders available for this screwdriver kit and even printed some but I did not like how brittle the hooks were or how they move if you remove the screwdriver kit from it. T-Clip Holder are just better and…
WARNING: THIS CAN CREATE A LOT OF FORCE (400+ lbs!), WHICH MEANS IT CAN STORE A LOT OF ENERGY THAT MIGHT BE RELEASED SUDDENLY. Please be cautious using 3d-printed objects for high loads and wear appropriate safety equipment! This is a…
This is a model of the connector part of Xiaomi Mija handheld vacuum cleaner accessories. It can be used to create custom ones. The push-button part that locks the connector in place is designed to be compliant enough to not require a…
Grampa para fijar tubo 20 mm a la pared. Necesitaba una pocas grampas y decidí diseñarla. Clamp for fixing a 20 mm tube to the wall. I needed a few clamps and decided to design one.
TAKES A 1/2 IN ROD SPLIT FOR PRINTING. BASED OFF THE ONES THAT COME WITH JAY ZX LEGACY. JUMP UP, KICK BACK, WHIP AROUND AND SPIN Category: Props
Lija rotativa para asar con Dremel o talado
A quick design for practical Mija sensors. To be printed in vase mode: 1mm line width , 0.25 layer height, 4 bottom layers, pay attention to volumetric speed with such wide line Each mount can be used as free standing, although screw one…
Soporte llaves fijas para skadis de ikea
Formula 1 AZERBAIJAN Baku City Circuit - with elevation and DRS detection zones. Can be printed with 120% size and 0.4 nuzzle.
This hand sanding block is designed to use standard sandpaper sheets divided into 1/4 sections, providing a more comfortable and efficient sanding experience while preventing the paper from folding during use. Esta base para lijado manual…
I charge my E-Scooter in my Homeoffice and didn't want to have the powerbrick lying on the floor. So I designed this small mount for my desk to have it away from my roomba. Can be printed without supports. Material: PLA Printer: Prusa Mini+
Uchwyt zwijacza rolety zewnętrznej. Roller blind holder printed with PLA 100% infill
Elijah on the ornate pedestal Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Statues here: https://www.printables.com/@StudioMechanik/collections/2993601
This is a modification of https://www.printables.com/model/502657-bambu-lab-ams-silica-pod-for-xiaomi-mija-hygromete . Original model: If you find that you cannot print the original model correctly as shown in the image, you can try this…
Remix of the container for silica gel to use with a Xiaomi Mija Temperature and Umidity bluetooth sensor ( https://ams.buy.mi.com/it/item/3205000015?skupanel=1&gid=4205000009 ) Compatible with…
bed slat holder - fijacion lama somier Print instructions Category: Household Summary bed slat holder - fijacion lama somier Print Settings Printer Brand: MK3 Printer: Prusa i3 </div> Rafts: No Supports: Yes </div> Resolution: 0.2-0-32…
Simple jarrón para decoración. No necesita soportes.
Print it reverse so smooth side is the right side, stands at the moment are available in 2 variations. .
permite lijar el techo o zonas lejanas con un palo de escoba
Modelo lo mas similar que pude a la original, sirve para mi mitsubishi colt GLX 1995 pero seguramente funcione tambien en Lancer y algunos modelos más. Fotos comparativas con la original (rota) aunque la impresa es una version anterior al…
This is a modification of the plastic "butterfly" keys that typically come on some valves. Es el reemplazo de la valvula mariposa de las llaves de agua. Lo que diseñe, es para darle más cuerpo a la manija y a su vez más resistencia. La…
I had to reduce the size of file to upload it, hence lower quality. (In Blender>import stl>decimate) Original stl after exporting from Meshmixer was 185mb. I can send you original file if you want to print it. Import your DICOM file in…
Azerbaijan Baku You can build a racing circuit in Baku using roads from the Racing Circuits - building kit . Here is a list of the parts and how many you will need: A1LRC - 2× A2CLRC - 4× A2LRC - 4× A3CLRC - 9× A3LRC - 8× B0CRC - 10×…
Sencillo soporte de sobremesa para organización de las llaves fijas más usuales a nivel doméstico y bricolaje. Impreso en PLA+ con 3 perímetros y 15 % de relleno cúbico adaptativo.
Impreso en PETG Se corto la pieza en dos con union cola milano. Layer 0.2mm Infill 25% (honeycomb)
Un soporte con la posibilidad de fijarle cualquier elemento con tornillos de métrica m3, también puedes usar unas cintas de velcro para sujetar de forma rápida algún objeto. INSTALACIÓN, consejos coloca los tornillos de menor longitud en…
1:400 model of the Belgrade gate in Novi Sad part of the Petrovaradin fortress. I made this model in my Architecture representation class and remade it for the 3d printing. The model was siting on my shelf for a while so it lost a couple…
My Elijah Keychain Layer Change At Layer 21
XIOMI mija bluetooth temp sensor support Category: Electronics
I wanted to print Kijai's cherry blossom but I also wanted to have a stem where I could insert it into a vase with other flowers. I didn't want to worry about any leaves breaking off so I designed this. You still need to print the stamen…
Repuesto de las manijas de un tocador que lleva varias decadas en servicio. Los postes se imprimieron como una pieza aparte para ahorrar tiempo y material de impresion al imprimir sin soportes. Una vez impresos se pueden unir con…
nozzle 0.4 layer height 0.2 normal printing
In order to change the battery at the button, to use foam tape, which is included with the button is not a good idea, so I've designed a simple holder, which could be mounted at the wall and hold this button with easy access.
This is a remote holder for the HappiJac remote used in truck campers. Printed in Petg with supports. All other params standard. Holes are sized for #8 wood screw. Can be mounted flat or on a wall.
Discover an extraordinary fusion of cultural elegance and modern artistry with this stunning STL figurine that challenges conventional boundaries. This beautifully crafted 3D printable model showcases graceful feminine form with…
soporte para dejar fija la pistola de calor de estación de soldado
Dispositivo diseñado para adaptarse a taladros convencionales, ideal para trabajos de maquetería y uso amateur. Su diseño compacto y funcional permite realizar tareas de lijado de forma precisa y segura. Fácil de ensamblar (ver…
A Ouija planchet used for holding our toothbrushes. We needed somewhere to store our toothbrushes when not being charged so I designed this to match our bathroom decorations. Can be printed with multiple colors using a color change. I…
Porta lijas diseñado para pegar en la pared con cinta doble faz. Tamaño: 125mm x 20mm x 50mm.
Herramienta para apretar tornillo o tuerca de cabeza hexagonal.
Repuesto para canilla de cocina monocomando. esta pieza fue diseñada a paratir de la original con mi impronta. es sencillo de imprimir, se usa como base el corte a 45º de la parte posterior del diseño y lleva soportes en la parte interior…
La pieza costa de tres partes una que es el eje principal debe imprimirce en ABS para su mejor recistencia las otras dos se pueden imprimir en PLA. The piece consists of three parts, one of which is the main axis and must be printed in…
Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. Check out my other coasters here!
See My 3D Models See My Website Imprime tu propia llave fija de 10 mm en 3D, ideal para ajustar tuercas estándar en proyectos mecánicos, bricolaje y reparación. Este diseño es compacto, resistente y optimizado para impresión FDM sin…
Just a more compact version with different lengths. Thanks for your work, JayMake! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Sunlu PETG Category: Other
Doporučuji vytisknout logo Svijany jinou barvou aby, byl tisk hezky barevný. Hlavní využití tohoto víčka je ochrana před vlítnutím vosy do plechovek. Velikost tohoto víčka je pro normální plechovku piva.
Herramienta para lijar en diferentes ángulos y superficies, se requiere de un tornillo m5x25 y un trozo de lija de 220x15mm. Parámetros Material: PLA Relleno: 15%<
Wall mount for the Xiaomi Mija thermometer. I used it in my printer enclosure. It's angled a bit upwards and a bit to the side. This is because I wanted to mount it on the right wall of my printer enclosure. I have included the mirrored…
Explore the world of Mario Bros. in 3D with an intricately designed Luoija Board & Planchette model by LanternLore. This model, a twist on an Ouija or Spirit Board, carries an intriguing blend of playfulness and mystery, capturing the…
Hand tool for sanding small items such as watches or jewelry Use M6x 25mm bolt. Print Settings Supports: No Resolution: 0,20mm - 0.30mm Infill: 15% Filament material: PETG Nozzle: 0.4mm
This is a remix of Xiaomi Mija Handheld Vacuum Connector from Hans Schulz https://www.printables.com/model/100083-xiaomi-mija-handheld-vacuum-connector The purpose is to add a flexible tube coming drain of a washing machine (just a…
🇦🇿 Salam! If you are Azerbaijani, a vexillologist (look it up!), or simply don't know what to do with your color filaments, this Flag Coaster collection is for you! Check out my other flag models available ! You can sell these but please…
Jarrón Clásico Minimalista: Elegancia atemporal Dale un toque de sofisticación a tu hogar con este jarrón de diseño clásico. Sus líneas limpias y su silueta estilizada lo convierten en una pieza versátil que se adapta a cualquier estilo…
Designed for the 24in1 screwdriver from Mija/Xiaomi. It holds the main body without the outer-shell. Print vertically with supports for the pegs.
Ouija Board Planchette Cookie Cutter
8mm *2mm Magnets. They are small and not very strong. Paused at 3.20 mm to place the magnet inside. Larger Version with stronger magnets. 10*3mm Paused at 3.00 to insert magnets Bottom Solid Layers 3
Doporučuji uprostřed tisku vyměnit filament aby, bylo hezky vidět logo Svijany.
![Name Plate [Elijah]](https://media.printables.com/media/prints/977907/images/7457452_72d86a80-dbd0-4e7b-94ab-debe237a7e4e_348b8d76-35fb-4e2e-a8b9-a4829f67f60f/elijahnametag.jpeg)
