298 models
This variation is slimmed down to make printing easier. No other changes the original was great.
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
Simple, but realistic and usable shuriken model. Good weapon against cartboard :) Note: print with higher infill, otherwise it won't fly very well My shuriken collection: https://www.printables.com/pl/@FilipB_1535214/collections/1067801
The source marked this model as adult content.
Magnets in the shape of Shurikens, one of the Ninja weapons. [ Information ] A “miniature version” of this Shuriken Magnet is now available on the following page. “mini-Shuriken Magnet — Ninja Weapons” Caution Please be careful not to…
I present two fully functional shurikens, 5 and 6-pointed. After some tests, I found that these shurikens are easier to throw, so they are better for beginners. But, in order to work well, you need to print them with 100% infill. Also…
Tried making this spinning shuriken as a way to try and reverse engineer one i saw online. I'm including the bearing without the "spikes" so one can try the tolerances first before printing the whole thing. The shuriken has a diameter of…
The source marked this model as adult content.
These 3D models are faithful replicas of Shurikens, Ninja throwing stars, that can also be used as coasters. [ CAUTION! ] Please be careful not to injure others or yourself, as the shapes of the models are very sharp.
Shuriken and Kunai Hey maker! 👋 A simple and highly printable ninja set. Features: Easy to print design. Print two copies and stick them together for full effect. Great for display or cosplay props. Printing Tips: Print flat for best…
This is a model of the Predator Shuriken as seen in the AVPs and the Predator. This is a second version and is redesigned be my to be “fully” foldable. I also added a seventh blade so it is now little different then the original, but the…
As the name states, it is a boomerang shaped like windmill shuriken from the Naruto series. The model is a technically a reversed shuriken, as the “sharp edge” (i.e. silver edge) will not hit the target when it spins. I've tried to model…
Fidget spinners with the shape of a shuriken. I remix the shurikens of @TrocheHole adding a hole for a 608RS bearing (typical bearing of skates, etc.). Also I design a cover for the bearing. It enter with some force, if it doesn't enter…
Shuriken fidget spinner toy. Ball bearing made with 14 airsoft BBs. Free spinning with pretty low friction. Scale by 0.4% (100.4) for PLA or whatever the shrinkage of your material is. I was able to print it at 0.15 layer height with…
Update - 4/25/17: I shortened the length of the screws by 1 mm. This left me with the most snug fit on the bearing without over-torqueing the screw and possibly breaking it. I decided to do my own take on a fidget spinner. I just started…
A replica of the NInjago shurikens Assembly is pretty intuitive, you can either use the pegs(they might need some slight rescaling depending on tolerances) or you can just use glue
A tessellating tile based on a triangle.
Replica of Genji's shuriken from the game Overwatch. We filmed a video covering the build of this as a stunt prop. One prop was printed in PLA and another was printed in TPU to be used as a more safe and flexible stunt prop. The model is…
Realistic and usable shuriken model. Print with 100% infill to achieve best results. My shuriken collection: https://www.printables.com/pl/@FilipB_1535214/collections/1067801
Its a clasic throwing star / shuriken.
If you want to see my best projects, I invite you here: https://cults3d.com/en/users/Guliwer06/3d-models This is simple project of 4 armed shuriken. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: Doesn't Matter…
Model of Genji's weapon Shuriken from the popular esports game Overwatch. Do print, share the makes and follow for more!
print in place spinning shuriken
This is model of Shuriken depicted in comic series Naruto. There are two models - full, which is actual model of the Shuriken, and half, for easier print. print it twice and glue together. There are no special recommendations for print,…
Ninja Star (Shuriken) fidget spinners and stand! There are two versions of the model - the one with name “Rounded Corners” is the kid friendly version. I've also included the model for the stand that is shown in the photos - which makes…
I wanted to print a Shuriken for my kid, but the sharp edges of the original model made me a bit nervous. All I did was chopping them off - all credit goes to the original designer.
This didn't start out to be a shuriken - I was actually aiming for a hexagonally symmetric triangular fractal pattern, and this is what popped out. But when put together, the pattern looks like 3D cubes. The tiles print relatively quickly…
This is a model of the Predator Shuriken as seen in the AVPs and the Predator. It comes in two versions - xxx_-_shuriken which is the simply closed shuriken. But it also comes in the open state where it has partially foldable blades (for…
this is a shuriken i made ago with designspark inspired from a video game have fun printing;)
I printed in ABS but use whatever.
This model was printed at 30mm/s with a .2mm layer height in vase mode.
weapon, shuriken, but a dangerous toy, even if it's plastic
It's little shuriken. Nothing more nothing less. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0,15 Infill: 10% Filament: Hilament PM PLA Copper Notes: It's really easy to print.…
Fidget in Dragon Shuriken style. Print Settings Printer Brand: RepRap Printer: Prusa i3 MK2 Rafts: Doesn't Matter Supports: No Resolution: 150 μm Notes: One part of shuriken takes about 45 minutes and takes 1,48 metre of 1,75 PLA filament…
Magnets in the shape of miniaturized Shurikens, one of the Ninja weapons. In these models, all corners are rounded for safety. Models with realistic shape are available on the following page. “Shuriken Magnet — Ninja Weapons” About…
Ninja star in 3 variants. Simple, all 100mm diam. Thanks for your support! We need your support as fresh air see also Simple Chain Nunchucks
No supports required. Scale : An adult's handful but if you like to grab it at the hole - I recommend to proportionately scale it to the size of your preference in your slicer. Print Settings : 0.4 mm Nozzle Heat Bed : 65 Degrees Nozzle…
ninja star tip: use supports for the print
A ninja set with Shuriken and Kunai
this shuriken is a great print and goes great with medyk3D's folding karambit.
Throwing star, Shuriken, Ninja star, who cares? just throw it!
Unleash your inner ninja with a stunning shuriken, Perfect for adding a touch of oriental flair to your home decor or as a show-stopping accessory for your cosplay ensemble. The possibilities are endless, so let your imagination run wild!…
Shuriken model Model is made of 2 identical parts (you can choose angled middle or normal), so make 2 instances and glue them together → that makes 1 shuriken IMPORTANT: ONLY TO BE USED AS AN ACCESSORY OR DISPLAY ITEM. NOT FOR THROWING AT…
Shuriken (ShuriKEY): The Shuriken has a hole made for a key ring and a 6803 ZZ 17x26x5 bearing. This project was supposed to be different from all keyspinners, it's fun to spin when you have several keys. Perfect to de-stress. Berings:…
A variation of the popular japanese throwing star
🌀 Predator Shuriken (AVP-Inspired) – Functional Prop Replica A fully 3D-printable fan-made Predator shuriken, loosely inspired by the Alien vs. Predator movie series. Designed for both display and articulated movement, this prop includes…
Description Ninja Shuriken Fridge Magnet - 6x3mm magnet Add a touch of ninja flair to your kitchen with this shuriken-shaped fridge magnet! This model is designed to resemble a traditional ninja throwing star and includes a single hole to…
Its a strange shuriken / throwing star, for more stars chekc out my throwing star collection
This model is compatible with the lego system.
This is a remixed fidget spinner, but it is with a bearing.
This Shuriken is based off of Hatake Kakashi's Kamui Shuriken, specifically the ones shown in the Naruto: Ultimate Ninja Storm 4 game. The whole shuriken is printable via the ShurikenWhole.stl, but it tends to have some defect on the tips…
Šuriken který se drží magnetem (5 mm).
Some other models in Naruto Collection : Kunai Flying Raijin Kunai Shuriken Dimensions (12mm Ring) Dimensions (18mm Ring) Height: 1cm (Normal) / 1.05cm (Dull) / 1.1cm (Super Dull) Printing non-dull might cause brittle edges!!! You can…
The model is just one half of a full throwing star, you may leave it that way or print 2 copies and join both of them. I personally like the model as it is. Please be careful not to throw this at people or animals, it may be plastic but…
This model is a fit for the Seeed Studio 13.3" Spectra 6 E‑Ink screen with a Seeed Studio XIAO ePaper DIY Kit EE02 controller and a 2500 mAh LiPo battery . It allows the screen to fit nicely in an IKEA Lomviken 30×40 cm frame without…
Tell me if it worked well for you. I was using Creality K1C for this print. How it works - https://youtube.com/shorts/rAUk62-0wYU Hello from Ukraine Print Settings 1) Min 2-3 walls 2) 3-4 layers for bottom 3) 5 layers for top 4) Min 15%…
All original Dummy 13 models are from Soozafone. ( https://www.printables.com/@soozafone ). A Shuriken (Japanese: 手裏剣, lit. 'hand-hidden blade') is a Japanese concealed weapon used by samurai or ninja or in martial arts as a hidden dagger…
Its a strange throwing star / shuriken.
EN: This is a simple six-pointed shuriken ninja throwing star. Print with three perimeters and higher filling, otherwise it is not stable enough and does not fly well. We have had good experiences with TPU in tough combat use ;-) — I…
It's a Demon Wind Shuriken that can close in and spread out
A print in place maker coin with moving parts. No assembly required.
This is a non-sharp, totally non-functional, very thin and floppy replica of the shuriken from “The Master”.
This model is compatible with the lego system.
shuriken ninja with 4 pointed. Aerodynamic and precise at launch.
This 3d printed shuriken, or ninja star, which has all sides sharp is very suitable for training and playing to be like a ninja. Its motif is used from the anime. Its center makes it used as a fidget spinner. easily 3d printed Material. PLA
3d printable shuriken for 16x5mm bearing. Just print all of the components that i shared and assemble it together. Without glue, without bolts and nuths, just print and assemble. Prints without supports. I saw this on another site but it…
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models: https://www.printables.com/model/1024242-scream-duck
Updated 01.25.26: Increased tolerances to accommodate different materials. This is an 8 point shuriken ninja throwing start that allows you to add a US quarter in the center for weight. The cap can be removed using tabs to retrieve the…
I'm printing in TPU95A with 4 walls and 15% gyroid infill.
Made this for fun, uses 6m bb's a bearing balls. Category: Props
Made a more kid friendly version of the spinner that isn't so pointy. Same bearing as the previous model if one would like to make a test print of the bearing. Happy printing
A public domain ninja star/shuriken by ethomson92 . Originally uploaded to Blend Swap .
Made 2 types of konoha shuriken, default and with hole for magnet 5x2mm
This is a replica of the second variant of the shuriken used on “The Master”, that fine TV show from 1984 starring Lee Van Cleef and Sho Kosugi. This is not a real shuriken - it is only 2 mm thick, is not sharp or sharpened, and is hardly…
If you've played Ninja games or watched similar anime, you might recognize this. I've always wanted one but have surprisingly not been able to find a file for one, so I designed it myself. The blades will lock into the open or closed…
Shuriken that you can use as a fridge magnet. I've left the lid part separate The idea is to use a small neodymium magnet and stick it to the lid. magnet 6x2 I hope you like it! Size : X:139,27mm Y:21,97mm Z:104,04mm Thank you
Print out your ninja fantasy with this shuriken.
Four great Shurikens
I went looking for models of shurikens found a model by @LeBaum that was one huge colection as a single STL, so i split them and added them as individual STLs and a 3MF file that has all of them on separate plates.
This 8-point ninja star (shuriken) is a clean, symmetrical 3D model released as public domain and free to use, modify, and redistribute . The evenly spaced blades create a classic multi-point design while maintaining solid geometry for…
Genjis Shuriken fom the game Overwatch, this is the anniversary Skin
Hey there! Here is a "Shuriken" packing puzzle I created in Fusion 360. Sizing: The overall size of the completed puzzle is 122mm AF (Across Flats) and 15mm thick. Notes: I've included .STP files in case someone wants to modify them…
Welcome weary traveller. Congratulations, you have uncovered one of the 3d printing worlds most closely guarded secrets - the Shuriken button! You can use this button to keep your clothes on or in the event of a surprise fight, vanquish…
I had a few people tell me that my shuriken spinner was a bit too big for their hands. Well, I had a few 624 bearings laying around for my double pendulum spinners, and I decided to make a version of my shuriken using those 624 bearings!
Add an extruder visualizer to your 3D printer it's cool way to pimp your 3d printer. Quick print, print with supports . 0.4 mm nozzle, 0.2 mm layer height. Printed at 45 degree angle kind of looks better (second .gif). Please hit <3 if…
Easy to print - strong - simple Ninja star hanger for coats, keys, etc. Has a screw hole for mounting to the wall. Printing Instructions: Print on its back with 4 or more walls and around 25% infill. No supports necessary.
This is a clean, symmetrical 4-point ninja star (shuriken) designed specifically for 3D printing . The model features evenly spaced blades with smooth chamfers for reliable printing and balanced geometry. It prints flat on the build plate…
Easy to print. Made the phone stand using a silhouette of Blaziken
![Shuriken [Collectible/Toy]](https://media.printables.com/media/prints/515958/images/4177926_e0e2b4af-175a-460a-8656-5458c6ffef8f/whatsapp-image-2023-06-29-at-181250.jpeg)
